MA933ASC
USER MANUAL
Thank you for your purchase.
Please read this manual carefully before using your new player.
If the actual operations of your player are not the same as in this
manual, visit our website for latest product information.
Http://www.nextar.com
Main Features:
DIRECT USB2.0 FS PLUG
SUPPORTS MP3, WMA
6 MODES OF EQ
LED DISPLAY
LOW BATTERY CONSUMPTION
Accessories:
User Manual 1
Driver Disc 1
USB Cable 1
Necklace stereo earphone 1
AAA battery 1
1
How to use it
Installation of battery
The red LED on the top panel will light after installing the battery for 8
seconds, and the player will be in stop mode.
Power ON / OFF
To turn on the player, once the battery is installed, press and hold the
Play key for 2 seconds until the LED light comes on, then press the Play
button to enter play mode.
To turn off the player, press and hold the Play key for 2 seconds.
During Play mode, press the Play button to enter Standby mode.
DIGITAL MP3 PLAYER
Volume+/Volume-
Press or hold the button to turn up or down the volume during a song
or recording.
Volume+Volume-
2
Previous Song/Next Song
Press the Last key to select the previous song, press the Next key to
select the next song.
Fast Reverse / Forward
In playing status, by holding the Last key, you can reverse faster; by
holding the Next key, you can move forward faster.
EQ Mode
Press the EQ key to enter the equalizer mode; 6 EQ modes:
Natural, Rock, Pop, Classical, Jazz, DBB.
Storing music to MP3 player
Connect Mp3 Player to PC
Take off the cover and connect to PC via USB plug
Click "My Computer" to find "Removable Disk"
Transfer songs of MP3 or WMA format from your computer to your
mp3 player.
Last Next
NOTICE:
To save energy, the player will turn off automatically in stop status
without use after 30 seconds.
3
Driver Installation
1.Windows 98 / 98SE Installation
a.Insert driver CD disc into your CD ROM to start up:\WINDOWS 98 DRIVER\
Setup.exe
b.A menu will automatically pop up
c.Select Install / Remove Driver to start installation
d.Follow the on-screen instruction to install the driver
e.Click "OK" to restart. (Must restart to complete installation), illustration 1
f.After restart, insert SPORT MP3 to the USB port on your computer/laptop.
Windows will automatically detect the new hardware. If setup is correctly
performed as instructed, you should find two "Removable Disks" shown in
"My Computer".
2.Windows ME / Windows XP / Windows 2000 Installation
For these operating systems, NO Driver is required because Windows has a
built-in driver that supports your unit. Simply plug your device into the USB
port and the operating system will recognize it. Next you will see two
"Removable Disks" drives in My Computer.
3. Linux 2.4.0 + / Mac 8.6 + Installation
No Driver is required for these operating systems. Simply plug the device into
the USB port and the system will automatically find it.
4
Specification
Weight
LED indication
PC Connection
Flash memory
Battery
MP3, WMA, WMV,
ASF
Music format
Working
Temperature
Operating System
25g (Without battery)
In stop status LED light, In play status LED flash
USB2.0 Full Speed
Flash storage: 32MB - 2GB
One AAA (No.7) alkaline battery
Max Play Time:10 hours
Max output of earphone
MP3 bits rate
WMA, WMV, ASF
bits rate
Frequency response
SNR
MP1, MP2, MP3, WMA, WMV, ASF, WAV
-5 - 40
Windows98/SE/ME/2000/XP/2003, Mac OS 10, Linux 2.4.2
(L) 10mW+ (R) 10mW (32Ohm)
8K bps - 320K bps
5K bps - 384K bps
20Hz to 20KHz
85dB
5
Loading...