Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0844 844 8999
• BS 7449: 1991.
• Batch No.JJ
• This product contains 4 mm glass that does not conform to BS 6206. If the glass is chipped or broken replace with
glass of the type described. Consult the manufacturer, retailer or agent with regard to obtaining a manufacturing
specification and shape for replacement glass quoting the model number and batch number or date of manufacture.
GLASS INFORMATION
• This item contains glass. Please handle with extreme care.
• Do not place very hot or cold items against or in close proximity to the glass surface unless adequately thick
insulation material is used to prevent such items from coming into contact with the glass.
• Do not strike the glass with hard or pointed items.
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will
scratch the glass.
• Do not sit or stand upon horizontal glass surfaces.
• Made from MDF board and smoked glass.
• Made in China.
• We recommend the use of the wall attachment straps for safety reasons. Wall fixings are not included.
• Care must be taken when cleaning around the product with a vacuum cleaner to prevent damage to the glass
• For general cleaning, periodically dust with a soft cloth.
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Should you need to return this product, please repack in the original packaging.
CARE INSTRUCTIONS
• Do not rub or scrub the surface when cleaning.
PRODUCT INFORMATION
GATSBY BATHROOM CONSOLE 871891
Page 1 of 7
FITTINGS
PARTS
(1). Top panel×
1pcs
A. Cambolts
x 12pcs
B.
Camlocks x
(2). Base panel
× 1 pcs
(7). Glass shelf
× 1 pcs
D. Glass
clamp x 4pcs
C. shelf fitting
x 12pcs
E. Black
Screws x 3 pcs
F. European
hinge x 4
G. Nickel
Screws x 24
H. Handle
x 2 set
(3).Left side panel
× 1 pcs
(4).Right side
panel × 1 pcs
(5).Left back
panel × 1 pcs
(6).Right back
panel × 1 pcs
(8). Shelf 1
× 1 pcs
I. Allen key
x 1 pcs
Page 2 of 7
STEP ONE
STEP TWO
1.The connection string B lock to the side plates (3),
(4) on (such as map location), using a wrench I lock
1.By three in one connector A and
connection column B the floor (2) plate
(8) and the side lock up, after a wrench I
lock
(10).Left
door × 1 pcs
(11).Right
door × 1 pcs
(9). Shelf 2
× 1 pcs
Page 3 of 7
STEP THREE
STEP FOUR
STEP FIVE
1. Lock up a self-tapping screw E right
and left back, with a wrench with selftapping screws E right and left back to
lock up, with wrench
1.The backplane (5) (6) installed (alignment side
behind slotting.)
1.The connection string B lock to the top (1) on
(such as map location), using a wrench I lock
2.The roof installed, with three in one connector A
and connection column B the roof (1) side (3) (4) to
lock up, after a wrench I lock
Page 4 of 7
STEP SIX
STEP SEVEN
STEP EIGHT
1.The glass clip D mounted to the side plate (3) (4),
such as map location
2.Laminated column C mounted to the side plate
(3) (4), such as map location
1.The glass (7) installed, such as map location
2.Laminated ((9) installed, such as map location
1.The door hinge lock around door and cabinet
body, a self-tapping screw G I locking wrench
Page 5 of 7
1.The left and right panels installed, adjust to the best
position
LATERAL
FRONT-TO-BACK
VERTICAL
STEP NINE
STEP TEN
1.To handle group H fitted to the left and right
panels
Page 6 of 7
STEP ELEVEN
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
YOUR CONSOLE IS NOW READY FOR USE
1. This item comes pre-fitted with two
wall attachment straps. Attach the
ends of the wall attachment straps to
the wall once the item has been
placed into the required position
using appropriate screws, washers
and wall plugs for your wall type.
WARNING: Ensure the area to be
drilled is free from hidden electrical
wires and
water or gas pipes.
NOTE: Wall fixings are not included.
Source suitable fixings for your wall
type, if in doubt consult a qualified
Page 7 of 7
Loading...