
Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Actual product size
H101.5 x W146 x D76.5cm
Need Help?
With: Assembly instructions
Missing or damaged parts
IMPORTANT - RETAIN FOR FUTURE REFERENCE Call: 0333 777 8999

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
IMPORTANT – RETAIN FOR FUTURE REFERENCE –
READ CAREFULLY.
This bed conforms to BS EN 716:2008 + A1:2013
WARNINGS
Be aware of the risk of open fire and other heat sources of strong heat, such as electric bar fires, gas fires, etc. in the near
vicinity of the cot.
Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
Do not leave anything in the cot or place the cot near to another product, which could provide a foothold or present a
danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
Do not use more than one mattress in the cot. The beds should not be placed too close to other furniture or windows, and
should be placed either tight against a wall or have a gap of 300mm between the wall and the side of the bed.
Assembly by adult only.
Once the mattress is placed on the bed base, make sure the gap between the mattress and the sides and ends cannot
exceed 30mm.
Do not leave anything in the bed, which could provide a foothold or present a danger of suffocation or strangulation.
Assembly fittings should always be tightened properly and care should be taken that no screws are loose to ensure baby
does not trap parts of the body, or clothing.
The mattress chosen shall be such that the internal height (surface of the mattress to the upper edge of the bed frame) is at
least 500mm in the lowest position of the bed base and at least 200mm in the highest position of the bed base.
To prevent injury from falls, the cot shall no longer be used for the child when the child is able to climb out of the cot.
The height of the bed base is adjustable. The lowest position is the safest and that the base should always be used in that
position as soon as the baby is old enough to sit up.
We recommend the size of the mattress: L 1400mm x W 700mm x H 100mm.
Do’s
When you are ready to start, make sure that you have the right tools and plenty of space.
Due to the size of the product we recommend that it is assembled in the room intended for use.
Unwrap all packaging materials and place the components on a clean surface to protect it from damage.
We recommend that the packaging is used to protect the surfaces during assembly.
Carefully check that you have all the parts before beginning assembly.
Occasional overall cleaning should be carried out approximately once a month by using a slightly dampened soft cloth then
buff with a dry clean soft cloth.
Never allow any kind of liquid to remain on your furniture. Absorption can cause finishes to de-laminate.
When moving you assembled bed, it is best to lift the bed, and never to drag it.
Please periodically check the stability and security of the beds. Please periodically check the fasteners and re-tighten as
necessary.
Don’ts
Please do not jump on your furniture.
Keep away from fire and other sources of strong heat, such as electric bar, fire, gas fire etc.
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
Do not stand or jump on this product.

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Number of people required
Two persons are required to assemble this item.
Time to assemble
2 hours
Tools required
not supplied not supplied not supplied supplied
Missing parts
If you are missing any fixtures and fittings for your product please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent to you free of charge.
Home service technicians
If you have a fault with your product please contact our customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement, refund or for a fully trained home service technician to visit
your home to assess the fault and repair the product where possible. If you have had the product for more than 28 days we
will send an independent home service technician to review and repair the product where possible and recommend further
action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To View our full furniture range please visit www.next.co.uk

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
GETTING TO KNOW YOUR PRODUCT
x 2

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Components supplied. Please use this guide if you require replacement parts.

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Fixtures and fittings supplied (actual size)

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Fixtures and fittings supplied (not to scale)

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Option 1: Option 2:
Option 1: Option 2:

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Option 1: Option 2:
Option 1: Option 2:

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Option 1: Option 2:
Option 1: Option 2:

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Option 1: Option 2:
Option 1: Option 2:

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Option 1: Option 2:
Option 1: Option 2:

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Option 1: Option 2:
Option 1: Option 2:

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Option 1: Option 2:
Option 1: Option 2:

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Option 1: Option 2:
Option 1: Option 2:

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions

Produced in China for Next Retail Ltd.
870074-2014-V1
AMBERLEY COT BED
870074
Assembly instructions
Actual product size
H101.5W146 x D76.5cm
Option 1: Option 2: