BEFORE YOU START
Produced in China for Next Retail Ltd
1
Please peri odically chec k all fitting s and re-tigh te n as
necessary.
Do’s
We suggest you spend a short time reading through this
leaflet before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space and a clean, dry area for assembly.
Tools not included.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Don’ts
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not overtighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand or jump on this product.
Number of people required to assemble
We recommend three people assemble this product.
Time to assemble
Tools required
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
you your product please If have a fault with contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be o
ffered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leiceste
r,
LE19 4AT
To view our full furniture range please visit www.next.co.uk
4 hours
not supplied not supplied not supplied
PH2 7mm
Unwrap all pa ckaging mater ials and plac e the compone nt s
on a clean surf ace to protec t it f rom damage.
We recomm end that the pa ckaging is us ed t o protect the
surface dur ing assembly.
To clean your ite m, wipe with soft c loth slight ly dampened
with water. Then buff w ith a dry clean c loth.
Do not use sili cone based furn iture polis h. Silicone i n
furniture p olishes can bre ak down the lac quer finish .
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not drag or pull your funiture.
This child’s bed c on forms to BS EN 74 7-1:2012
Routinely c heck that the u pp er safety rai l and ladder
attachmen t is secure and t ig hten any fitt ings using th e
appropria te tools
All assembl y fittings sh al l always be tig htened prop er ly.
Screws shal l not be loose beca use a child can s queeze part s
of the body, or clothing (e .g. strings , ne cklaces, ri bbons for
babies, dum mies, etc.) c ou ld get caught . There wou ld be
danger of str angulation.
WARNING: Chi ldren can becom e trapped bet ween the bed
and the wall. To avoid risk of s erious injury t he distance
between the t op safety bar ri er and the wall s hall not exce ed
75mm or shall b e more than 230mm .
WARNING: Do no t use this chil d’s bed if an y pa rt is broken,
torn or missi ng
WARNING: Hig h beds and the uppe r bed of bunk bed s are
not suitabl e for childre n un der six years d ue to risk of inj ur y
from falls
Do not leave it ems such as rop es , strings, co rds, harnes se s
and belts att ached to or hun g to t he bunk/hig h bed due to the
risk of stran gulation
Children ar e likely to play, bounce, j um p and climb on th e
beds, there fore the chil d’s bed sho ul d not be placed t oo
close to othe r furniture o r wi ndows, and sh ould be place d
either tigh t to any wall or ha ve a g ap of 300mm bet ween
the wall and th e side of the bed
WARNINGS
We recomm end that the pa ckaging is us ed t o protect the
surfaces du ring assemb ly
This bed is des igned to be used wi th a mattress w ith the
following d imensions H17 x W 90 x D190cm.
Please ensu re that the mat tr ess depth doe s not go past the
permanent m ark on the post /U pper Safety B arrier
681451
Assembly instructions
HEART AND STARS CABIN STATION (CHEST)
681451 - 2014 - V1
Carefully check that you have all the parts before beginning
assembly.