Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
PRODUCT INFORMATION
• Made from MDF with painted finish.
• Made in Poland.
CARE INSTRUCTIONS
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
134894 HOVE ROBE
134894 Robe 03
Page 1 of 8
• We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of persons is required to assemble this product.
• Wall fixings are not included.
• Not suitable for use in bathrooms.
• We recommend the use of the wa
ll attachment bracket/strap provided for safety reasons.
• Do not use this item if any structual part is broken or missing.
2
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always useanon-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.
• Use non-silicone beeswax to maintain the shine.
• Do not use furniture polish.
• Useafurniture oil periodically to maintain the finish and prevent the oil from dryi
ng out.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching
or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fix
ings should always be tightened properly and periodically check all fixings and tighten if necessary.
Services on 0333 777 8999
FITTINGS
CA x 4
ø15x12 mm
Camlock
CB x 29
ø15x15 mm
Camlock
B x 33
ø8x36 mm
Cambolt
F x 22
Panel
Fixator
13x150 mm
Strap
QA x 1
QC x 1
ø4x14 mm
Screw
S x 2
Washer
QB x 2
Washer
G x 4
D9,5
ø4x25 mm
Screw
EC x 6
ø4x25 mm
Screw
HB x 6
ø26mm kr 17
Cabinet Hinge
HG x 6
GHuide
inge
HR x 2
Hanging Rail
Holder
EA x 2
ø4x12 mm
Screw
PARTS
H x 4
Handle
EB x 12
ø4x16 mm
Screw
D x 7
ø5,8x36 mm
Wooden Dowel
S x 4
Pin
x2
Page 2 of 8
134894 Robe 03
D
D
D
D
1. Insert 12 x cambolts (B) into side panels 1 & 2.
nto side panels 1 & 2.2. I 12
3. Insert 2 x holders (HR) into side panels 1 & 2 using
2 x screws (EA) and tighten with a screwdriver.
nsert x cam ( B)locks C i
B
STEP ONE
HR
EA
STEP TWO
B
1. Insert x cam ( B) into .
Insert x
Insert x cam ( B)
6 locks C rails 5 & 6 & 7
2. 6 5
& 6 & 7
3.
4. 10 locks C into partition 15.
wooden dowels (D) into side rails
Insert 4 x cambolts (B) into side rail 7.
CB
CB
CB
CBCB
CB
B
B
B
B
CB
CB
CB
CB
CB
CB
CB
4. Insert 6 x (HG) into side panels 1 & 2.guide hinges
HG
STEP THREE
1. Attach rail 7 on to partition 15 and tighten the
camlocks (CB) to lock cambolts (B).
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
B
a)
b)
c)
CB
B
B
B
B
B
B
HR
HG
HG
HG
CB
CB
CB
CB
CB
CB
B
B
B
B
B
HR
HG
HG
B
HG
CB
CB
CB
CB
CB
CB
D
D
D
CB
134894 Robe 03
Page 3 of 8
CB
CB
CB
B
STEP FOUR
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
B
a)
b)
c)
CB
Page 4 of 8
B
B
B
B
B
B
1. Place back panel 8 into the grooves in the back of
the side panels 1 & 2.
STEP FIVE
134894 Robe 03
1. Insert 6 x cambolts (B) into bottom panel 4.
s 5 & 6 and partition 15
s 5 & 6 and partition 15
2. Attach side panel 1 to bottom panel 4 and t
B
Attach side panel 2 to bottom panel and t
ighten
the camlocks (C ) to lock cambolts (B).
3. Attach rail to side panel 1
and tighten the camlocks (CB) to lock cambolts (B).
4. Attach rail to side panel 2
and tighten the camlocks (CB) to lock cambolts (B).
5. ighten the
camlocks (CB) to lock cambolts (B).
B
1. Insert x cambolts (B) into panel .6 top 3
1.
ighten the camlocks (C ) to lock cambolts (B).
Attach top panel 3 to the assembled unit and
t B
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
B
a)
b)
c)
CB
B
B
B
B
B
B
Page 5 of 8
F
F
a) b) c)
1. Secure back panel using x panel fixators F)
as shown on the picture.
8 18 (
F
F
F
F
F
F
F
F
F
F
F
F
F
STEP SEVEN
STEP EIGHT
STEP SIX
F
F
F
F
134894 Robe 03
B
CB
D
CA
CA
B
B
STEP NINE
STEP TEN
STEP ELEVEN
1.
. upporting bottom
drawer bar
upporting bottom
drawer bar
Insert 4 x camlocks (CA) into drawer side panels
10 & 11.
2 Insert camlock (CB) into s
9.
3. Insert wood dowel (D) into s
9.
1. Insert 5 x cambolts (B) into drawer front panel 14.
B
D
Page 6 of 8
1. Attach drawer side panels 10 & 11 to drawer
ront 14
. Attach supporting bottom drawer bar to drawer
front 14 tighten the camlocks (C ) to lock
cambolt (B).
. Slide drawer bottom panel 1 into the grooves in
the drawer side panel 10 & 11.
. Attach drawer back panel to drawer side panels
10 & 11 and to supporting bottom drawer bar using
6 x screws (E ) and tighten with a screwdriver.
f
2 9
and B
3 2
4 13
9
C
Ensure the arrow indicators are pointing towards the
panel edges when inserting before tightening with a
screwdriver.
and tighten the camlocks (CA) to lock
cambolts (B).
EC
EC
EC
STEP TWELVE
1. Secure panel using x panel
fixators F) as shown on the picture.
drawer botton 12 4
(
a) b) c)
F
F
F
F
CA
CB
134894 Robe 03
2 2 H
2 G
. Attach x handles ( ) to drawer front panel using
x screws ( ) and tighten with a screwdriver.
G
H
STEP THIRTEEN
Page 7 of 8
HB
EB
EB
1. Attach x hinges (H ) to the doors 1 (x2) using
x screws (EB) and tighten with a screwdriver.
6 B 6 12
STEP FOURTEEN
HB
HB
HB
1. Insert drawer into the assembled unit.
134894 Robe 03
1. Attach the doors 1 (x2) to side panels 1 & 2. Insert
cabinet hinge (HA) to guide hinge (HB) and tighten
with a screwdriver.
. Adjust the hinges
a) side to side b) front to back c) up & down
. Insert x ( ) to .
6
2
3. Insert hanging rail 17 into the assembled unit.
4 4 pins S rails 5 & 6
S
STEP FIFTEEN
Page 8 of 8
HR
HR
S
WNARNING: Always ensure the area to be drilled is
free from hidden electrical wires, water and gas
pipes.
OTE: Wall fixings are not included, please source
suitable fixings for your wall type. If in doubt please
consult a qualified trades person.
QB
QC
QA
QB
1 2 H door 2
G
. Attach x handles ( ) to fusing x screws
( ) and tighten with a screwdriver.
G
H
QB
QC
QA
QB
2. Attach wall strap (QA) to the assembled unit using
2 x washer (QB) and 1 x screw (QC).s
STEP SIXTEEN
S
134894 Robe 03
Loading...