Nexgrill Gas Grill User Manual

280 Machlin Court, City of Industry, CA 91789

(Tel) 800-790-1299 (Fax) 909-718-1949

NOTICE

Dear Customers:

Thank you for choosing our barbeque grill and hope that you enjoy
our product.

Our gas valves and components are preset at the factory to operate
on Liquid Propane (LP). If you wish to convert your grill from LP to

Natural Gas (NG), we strongly recommend that you hire a
professionally trained technician to convert the unit. Please
understand that we will not be responsible for any liability, personal

injury, or property damage resulting from an improperly converted

grill.

We will provide warranty parts for this product after it is converted,

however, we will not honor any warranty claims for parts damaged
during the conversion of the original LP valves and orifices to NG
configuration if the conversion is done improperly.

Natural Gas Conversion Style# 710-0650

AWARNING! FALURE TO HEED THESE WARNINGS COULD RESULT IN A FIRE OR EXPLOSION THAT

COULD CAUSE SERIOUS BODILY INJURY, DEATH OR PROPERTY DAMAGE.

Installation of this Natural Gas Conversion kit must be performed by a QUALIFIED GAS TECHNICIAN ONLY.
DO NOT ATTEMPT TO INSTALL THIS KIT YOURSELF. Improper installation could result in a gas leak which
could cause a fire or explosion and cause serious bodily injury, death or property damage. Leaks due to improper
installation could occur immediately or slowly over time. Ifyou hear any unusual noises or leaks, smell gas or
unusual odors, or notice anything unusual with the operation of your gas appliance after the installation,
immediately shut off the gas supply and discontinue use until the appliance is repaired by a QUALIFIED GAS

TECHNICIAN.

If there are damaged or missing parts when you unpack this kit, call 1-800-913-8999. DO NOT have your
QUALIFIED GAS TECHNICIAN attempt to install this kit until you receive replacement for any damaged or
missing parts.

Orifice Chart

The different burner valves in this grill have different BTU ratings. This means that the amount of gas coming from
each orifice varies in order to create the BTU's. The holes in the orifices themselves are drilled to different sizes so as

to allow the proper amount of gas to flow through them. Please note the chart below as an easy reference for the
various orifice opening sizes for the different valves in the grill.

720-0650B, 730-0650B / 810-0010, 830-0010 orifices size

Orifice Sizes and BTU Ratings

LP NG

Orifice Orifice

Components Size BTU Size BTU

Main Burner 0.94 10K 1.55 10K

Rear Burner 1.07 13K 1.84 13K

Searing Side Burner 1.15 15K 1.90 15K

Tools are required for converting from LP to NG.

Below tools and orifices are provided.

Allen Key

6mm Wrench

6mm Nut Driver

NG Rear Burner Orifice

NG Searing Side Burner Orifice

Below tools are not provided.

Phillips Head Screwdriver (+)

Monkey Wrench