Newstar FPMA-DTB100 Product Data Sheet

FPMA-DTB100 NEWSTAR FLAT SCREEN TOOLBAR

Newstar Desk Mount Toolbar for up to
three 10-24" monitor screens - Silver

SPECIFICATIONS

Color
Depth
Desk mount
Height
Height adjustment
Max. screen size
Max. weight
Min. screen size
Min. weight
Screens
Type
VESA maximum
VESA minimum
Warranty
EAN code

Silver
8 cm
Clamp
0 - 42 cm
Manual
24
10
10
0
3
Fixed
100x100 mm
75x75 mm
5 year
8717371442262

The NewStar toolbar desk mount, model FPMA-DTB100 is a 130 cm wide toolbar for 3
(maximum) flat screens up to 24” (61 cm). The toolbar allows to slide flat screens from left to
right across the bar. The toolbar is supplied without flat screen mounts. The flat screen
mount must be purchased separately. One bracket needed each screen. This toolbar is a
great choice for space saving placement on desks using a desk clamp.

Different models brackets are offered to be combined with the toolbar:
FPMA-DTBW200 offers NewStar's versatile tilt (180°), rotate (270°) and swivel (180°)
technology allows the mount to change to any viewing angle to fully benefit from the
capabilities of the flat screen. Depth 8 centimetres. FPMA-DTBW200 has two pivot points
and is suitable for screens up to 24" (61 cm). The weight capacity of this mount is 10 kg each
screen. The toolbar mount is suitable for screens that meet VESA hole pattern 75x75.
Different hole patterns can be covered using NewStar VESA adapter plates.

NewStar Products Europe B.V.
Wateringweg 62/B
2031 EJ HAARLEM
THE NETHERLANDS

Phone
Fax
Email
Website

FPMA-DTBW910 offers NewStars’ unique tilt (180°), rotate (270°) and swivel (260°)
technology allows the mount to change to any viewing angle to fully benefit from the
capabilities of the flat screen. Depth 14 centimetres. FPMA-DTBW910 has one pivot point
and is suitable for screens up to 24" (61 cm). The weight capacity of this mount is 12 kg each
screen. The toolbar mount is suitable for screens that meet VESA hole pattern 75x75 and
100x100. Different hole patterns can be covered using NewStar VESA adapter plates.

FPMA-DTBW940 offers NewStars’ unique tilt (180°), rotate (270°) and swivel (180°)
technology allows the mount to change to any viewing angle to fully benefit from the
capabilities of the flat screen. Depth adjustable from 0 to 48 centimetres. FPMA-DTBW940
has three pivot points and is suitable for screens up to 24" (61 cm). The weight capacity of
this mount is 12 kg each screen. The toolbar mount is suitable for screens that meet VESA
hole pattern 75x75 and 100x100. Different hole patterns can be covered using NewStar
VESA adapter plates.

: [phone]
: [phone]
: [e-mail]
: www.newstar.eu

NewStar cannot be held liable for any inaccuracies and copyrights.
No part of this publication may be reproduced and/or published by print, photocopy,
microfilm or in any other way, without prior written permission of
NewStar Computer Products Europe BV.

FPMA-DTB100 NEWSTAR FLAT SCREEN TOOLBAR

NewStar Products Europe B.V.
Wateringweg 62/B
2031 EJ HAARLEM
THE NETHERLANDS

Phone
Fax
Email
Website

: [phone]
: [phone]
: [e-mail]
: www.newstar.eu

NewStar cannot be held liable for any inaccuracies and copyrights.
No part of this publication may be reproduced and/or published by print, photocopy,
microfilm or in any other way, without prior written permission of
NewStar Computer Products Europe BV.