Newport PHH-60, PHH-80 Owner's Manual

PHH-60

4

.3 9

ON

OFF

PH

µS

µS

pH/CONDUCTIVITY

METER

PHH-60/PHH-80

pH/Conductivity Meter

Operator’s Manual

Newport Electronics, Inc.

Additional products from

Newport Electronics,Inc

.

THE NEW STANDARD FOR QUALITY

In the USA and Canada: 800-NEWPORT

In Mexico 95-800-NEWPORT

Or call your local Newport Office.

This documentation may not be copied, photocopied,

reproduced, translated, or reduced to any electronic medium

or machine readable form, in whole or in part, without prior

written consent of NEWPORT ELECTRONICS, INC.

© 1994 Newport Electronics, Inc. All rights reserved.

This product may be covered by one or more

of the following patents:

United States Patents Des. 336,895; 5,274,577

France Brevet No. 91 12756

Spain 2039150

United Kingdom Patent No. 2248954

and other international patents pending

From the technical library of:

__________________________________________________________________

Clock/Timers

Counters

Flow Sensors

Frequency Meters

Multimeters

On/Off

Controllers

pH Controllers

pH Electrodes

pH Pens

PID Controllers

Printers

Process Meters

Rate Meters

Recorders

Relative Humidity

RTDs

Soldering Iron

Testers

Strain Gauge

Meter

Thermistors

Thermocouplers

Thermowells

Timers

Totalizers

Transmitters

Voltmeters

Wire

Warranty

All Products from NEWPORT ELECTRONICS, INC. are warranted
against defective material and workmanship for a period of one (1)
year from the date of delivery.

If the unit should malfunction, it must be returned to the factory for
evaluation. NEWPORT’s Customer Service Department will issue an
Authorized Return (AR) number immediately upon phone or written
request. Upon examination by Newport, if the unit is found to be
defective it will be repaired or replaced at no charge. However, this
WARRANTY is VOID if the unit shows evidence of having been
tampered with or shows evidence of being damaged as a result of
excessive corrosion; or current, heat, moisture or vibration; improper
specification; misapplication; misuse or other operating conditions
outside of NEWPORT’s control. Components which wear or which are
damaged by misuse are not warranted. These include contact points,
fuses, and triacs.

In addition to NEWPORT’s standard warranty period, NEWPORT
ELECTRONICS will extend the warranty period for one (1) additional
year only if the warranty card enclosed with each instrument is
returned to NEWPORT.

Newport is glad to offer suggestions on the use of its various
products. Nevertheless, NEWPORT warrants only that the parts
manufactured by it will be as specified and free of defects.
NEWPORT MAKES NO OTHER WARRANTIES OR REPRESENT­ATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED,
EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES
INCLUDING ANY WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
DISCLAIMED. LIMITATION OF LIABILITY: The remedies of
purchaser set forth herein are exclusive and the total liability of
NEWPORT with respect to this order, whether based on contract,
warranty, negligence, indemnification, strict liability or otherwise,
shall not exceed the purchase price of the component upon
which liability is based. In no event shall NEWPORT be liable for
consequential, incidental or special damages.

Every precaution for accuracy has been taken in the preparation of
this manual; however, NEWPORT neither assumes responsibility for
any omissions or errors that may appear nor assumes liability for any
damages that result from the use of the products in accordance with
the information contained in the manual.

SPECIAL CONDITIONS: Should this equipment be used in any
nuclear installation or activity, purchaser will indemnify NEWPORT
and hold NEWPORT harmless from any liability or damage
whatsoever arising out of the use of the equipment in such a manner.

Return Requests

Direct all warranty and repair requests/inquiries to the NEWPORT
Customer Service Department. BEFORE RETURNING ANY
PRODUCTS(S) TO NEWPORT, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM NEWPORT’S
CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID
PROCESSING DELAYS). The assigned AR number should then be
marked on the outside of the return package and on any
correspondence.

The purchaser is responsible for shipping charges, freight, insurance
and proper packaging to prevent breakage in transit. NEWPORT’s
warranty does not apply to defects resulting from action of the buyer,
mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modification.

FOR WARRANTY RETURNS,
please have the following infor­mation available BEFORE con­tacting NEWPORT:

1. P.O. number under which
the product was PUR­CHASED,

2. Model and serial number of
the product under warranty,
and

3. Repair instructions and/or
specific problems relative to
the product.

FOR NON-WARRANTY
REPAIRS,

consult NEWPORT
for current repair charges. Have
the following information avail­able BEFORE contacting NEW­PORT:

1. P.O. number to cover the

COST of the repair,

2. Model and serial number of

product, and

3. Repair instructions and/or

specific problems relative to
the product.

M0603/0894

For technical or application assistance please call:

Newport Electronics, Inc.

2229 South Yale Street

Santa Ana, CA

92704-4426

TEL: [phone],

(800) NEWPORT • FAX: [phone]

Newport Technologies Inc.

976 Bergar

Laval (Quebec)

H7L5A1, Canada

TEL: [phone]

FAX: [phone]

Newport Electronics Ltd.

Unit 25 Swannington Road

Cottage Lane Industrial Estate

Broughton Astley

Leicestershire

England, LE9 6TU

TEL: [phone]

FAX: [phone]

Newport Electronics B. V.

Postbus 8034

1180 LA Amstelveen

The Netherlands

TEL: [phone]

FAX: [phone]

Newport Electronics Spol S.R.O.

Ostravska 767

733 01 Karvina

Czech Republic

TEL: [phone]

FAX: [phone]

Newport Electronics GmbH

Daimlerstrasse 26

D-75392 Deckenpfronn

Germany

TEL: [phone]

FAX: [phone]

Newport Electronics S.A.R.L.

9 rue Denis Papin

78190 Trappes

France

TEL: [phone]

FAX: [phone]

In Mexico

TEL: 95-800-NEWPORT

1

Page

Section 1 Unpacking ................................ 2

Section 2 General Description ................... 3

Section 3 Parts of the Meter ..................... 3

Section 4 Setting Up the Meter ................. 4

Installing the Battery ................................. 4

Setting Up the Electrodes ......................... 5

Section 5 Calibrating the Meter ................ 6

pH Mode ..................................................... 6

Conductivity Mode ................................... 7

Section 6 Operating Procedure ................. 7

Section 7 pH Electrode Care ..................... 8

Section 8 pH Electrode Replacement ......... 9

Section 9 Conductivity Electrode Care ..... 10

Section 10 Conductivity Electrode

Replacement ........................... 10

Section 11 Maintenance ......................... 11

Handling ................................................... 11

Cleaning .................................................... 11

Section 12 Specifications ........................ 11

PHH-60 and PHH-80
pH/Conductivity Meter

TABLE OF

CONTENTS