New Image Maxi-Glider 360 Instruction manual
newimagefitness.co.uk
2
Introduction to New Image
Our New Image brand is focused on transformation.
Whatever your fitness goals, our aim is to design
and engineer fitness products to help you reach
your targets.
We know that sometimes the hardest part is getting started so we build
easy-to-use solutions that make getting fit fun and effective.
We are on a mission to build a fitter, more active nation.
Welcome to our Active Innovation brand,
New Image
®
newimagefitness.co.uk
3
Introduction to
Maxi-Glider 360
The Maxi-Glider 360® is a versatile and lowimpact workout device that targets your lower
body and core.
The introduction of moving handles ensures a full body workout
that recruits even more muscles. Gripping the stationary handles
is easier but it’s important to remember that the more muscles you
use, the more calories you’ll burn.
The Maxi-Glider 360 has been engineered to be simple to use.
Just choose your resistance level, jump on and get moving.
The following pages will help you get the most out of your MaxiGlider 360 with exercises, meal plans, tips and tricks.
4
Using your Maxi-Glider 360
Safety Information:
Please read this instruction manual before you
begin assembly. It is important to keep these
instructions for future reference.
• Assemble and operate the equipment on a level
surface.
• Ensure the equipment is stable before use.
• Always ensure that the equipment has adequate
space on each side for emergency dismount. A
minimum of 0.6m.
• The safety level of the equipment can only be
maintained if it is regularly examined for wear
and tear.
• Replace defective components immediately
and keep the equipment out of use until it is
repaired.
• Use only the adjustment setting as described
in the instructions. Always use the correct
adjustment pin/fixing.
• Always check that any pins/fixings are tight and
secure before use and after adjustment.
• Never leave any adjustment devices projecting
from the equipment.
• Always consult your doctor before undertaking
any exercise programme.
• Always wear suitable clothing and footwear e.g.
tracksuit, shorts and training shoes.
• Remove all personal jewellery before exercising.
• Try to ensure your back is straight while
exercising, especially for long periods.
• Ensure you warm up well before using the
equipment as this will help to reduce muscle
strain.
• After eating, allow 1-2 hours before exercising as
this will help to prevent strain.
• Never overload the equipment: MAX USER
WEIGHT 110Kgs.
• Never use the equipment in any other manner other
than the ways explained in these instructions.
• If you feel faint, stop exercising immediately.
• Injuries to health may result from incorrect form /
technique or excessive training.
• Children should not be allowed on or around the
equipment, especially when it is not in use and
unsupervised.
• This appliance is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning the use of
the appliance by a person responsible for their
safety.
• This product is not suitable for therapeutic
purposes.
• This product in intended for home use only.
• CAUTION the instructions must be followed
carefully in the assembly, use and maintenance
of the equipment.
• Safety standards: This equipment meets the
requirements ISO 20957-1
Assembly:
• It is important you assemble the product in a
clean and uncluttered space.
• We recommend you have someone assist you
with the assembly as some components are
heavy.
• Remove all the parts from the carton and lay
them out on the floor.
Customer support:
• Should you require any support regarding this
product please call our customer services on
0800 587 6133. High Street TV, PO Box 724,
Altrincham WA15 5BJ
Care and maintenance:
• This equipment should not be placed outdoors, in
a garage or an outbuilding. Keep the equipment
in a dry place with as little temperature variation
as possible.
• We recommend placing a mat beneath the
equipment to protect both the equipment and
flooring. New Image mat can be purchased at
newimagefitness.co.uk.
• Use a warm, damp cloth to keep the product
clean.
• Do not wet clean electrical components. Unplug
before any care and maintenance.
• The safety level of the equipment can be
maintained only if it is regularly examined for
damage and wear. This includes any ropes,
pulleys, nuts, bolts, moving parts, bushes,
chains, wheels, bearings and connection parts
etc.
• Ensure that you inspect the product regularly
(once a week is recommended).
• Ensure that all fixings are tight before use.
• Always replace damaged or worn components
with original parts from the manufacturer.
0.6m
0.6m0.6m
0.6m
5
What’s in the box
Component
Part No. and Description
#1 A-Frame
#2 Stationary Handles
#3 Moving Handles
#4a Front Foot
#4b Back Foot
#5 Screw (m10*60), Washer and Nut
#6 Screws (m8*40)
#7 Washers (m8*40)
#8 Soft Bumpers
#9 Supporting Pin
#10 Alan Key
#11 Wrench
#12 Progress Tracker
#13 Phone/Tablet Holder
Qty
1
1
2
1
1
4
6
6
2
1
1
1
1
1
6
#14 Screws
2
Setting up your Maxi-Glider 360
Everything you need to assemble your Maxi-Glider 360 is in your pack.
Follow these 9 steps to build it:
Step 1
Spread legs of A-frame and screw in supporting pin.
Step 2
Attach feet, ensuring back feet has the wheels facing
outwards. Use screw #5.
7
Step 3
Depress pin and lower oversized footplates.
Step 4
Lift 360O legs and insert soft bumper on both sides.
8
Loading...