Page 1
RACKMOUNT 7'' 3G-SDI DUAL LCD MONITORS
USER MANUAL
UMEN-081013-V1.0
Page 2
User manual
SUMMARY
1. INTRODUCTION ............................................................................................................................... 3
2. PACKAGES CONTENT ....................................................................................................................... 3
3. PRODUCT DESCRIPTION .................................................................................................................. 3
4. PANEL FUNCTION AND BUTTON OPERATING INSTRUCTION .......................................................... 4
5. OSD OPERATING INSTRUCTION ....................................................................................................... 6
A. Shortcut buttons: ........................................................................................................................ 6
a. The image menu ...................................................................................................................... 6
b. FN user-definable function button .......................................................................................... 6
B. MENU Operation ......................................................................................................................... 6
a. Picture ..................................................................................................................................... 6
b. Marker ..................................................................................................................................... 7
c. Display ..................................................................................................................................... 8
d. DSLR Aux& Audio ..................................................................................................................... 9
e. System ..................................................................................................................................... 9
6. SOFTWARE ..................................................................................................................................... 10
A. Cross-connection network cable ............................................................................................... 10
B. Software settings ....................................................................................................................... 10
7. SPECIFICATIONS ............................................................................................................................. 11
8. TROUBLE SHOUTING ..................................................................................................................... 11
9. WARRANTY AND CONTACTS ......................................................................................................... 12
www.newhank.com
2
Page 3
User manual
1. INTRODUCTION
This monitor is a multirack panel with two 7'' LCD monitors with HDMI, 3G-SDI, YUV and video
composite inputs. It is a high quality product, made for any professional display applications in different
markets such as broadcast, industry, security, ...
2. PACKAGES CONTENT
Rackmount monitor
Power supply
Tally Connector
Power cord
User manual
3. PRODUCT DESCRIPTION
This dual LED screen display provide video monitoring. The monitor with high resolution 1280x800, to
receive the 3G-SDI, HDMI,Y/Pb/Pr and analog composite video signal. It can also provides 3G-SDI,
HDMI, YUV, composite video signal output. All video signals by digital processing, high quality scaling
on the screen. This monitor is dedicated to be used in the TV news production, editing, broadcast and
television, special vehicles in areas such as video surveillance.
3G-SDI, HDMI, YUV, CVBS inputs and outputs
178° Wide view angles
High resolution 1280x800
Brightness of 400 cd/m²
Contrast ratio: 800:1
Fast response time
Tally Interface with indicating light
Thin design
www.newhank.com
3
Page 4
User manual
4. PANEL FUNCTION AND BUTTON OPERATING INSTRUCTION
1． INPUT: circularly switch among of HDMI, YPbPr, Video and SDI.
2． MENU: To activate OSD (on-screen display) menu. Press to switch among the brightness,
sharpness, contrast, saturation, Tint, MENU and Exit.
3． ◄ Left selection button: to select item on OSD menu and adjust its value; Press to decrease the
value of brightness, sharpness, contrast, saturation and Tint.
4. ► Right selection button: to select item on OSD menu, adjust its value and confirm it; Press to
increase the value of brightness, sharpness, contrast, saturation and Tint.
5． ENTER.
6． FN: Function button; to launch function menu quickly.
Note: The interfaces within Monitor 1 provide signal source for monitor 1. The interfaces within
Monitor 2 provide signal source for monitor 2. TALLY interface, Mini USB interface, power supply
interface and LAN port are common interfaces.
www.newhank.com
4
Page 5
User manual
1. TALLY interface and interface definition.
2. Mini USB input (Only used for program upgrades, do NOT use if nonprofessionals).
3. 12V DC power input.
4. YPbPr input.
5. YPbPr output.
6. Video input. 7. Video output.
8. HDMI input. 9. HDMI output.
10. SDI input. 11. SDI output.
12. The LAN port. (Connected to PC network interface for function adjustment.)
www.newhank.com
5
Page 6
User manual
5. OSD OPERATING INSTRUCTION
Before setting the functions, please make sure the device is connected correctly.
A. Shortcut buttons:
a. The image menu
Power on, press “◄ / ►” buttons on the device, brightness display bar will appear at the bottom of the
screen, then press the MENU button to switch among brightness, sharpness, contrast, saturation, tint,
MENU and Exit. User can adjust the parameters of the selected item with “◄ / ►”buttons to meet their
needs.
b. FN user-definable function button
Press FN button to pop up the default options, Use “◄ / ►” buttons to adjust
the value of selected item.
Long press FN button for 3-5 seconds to pop up shortcut menu directly. As
shown in right Figure (default menu is displayed in white font).
Use “◄ / ►” buttons to select the desired item.
Finally, use the “ENTER” button to confirm the selected item as default.
Functions of FN button can be customized: Center Marker, Safety Marker,
Check Field, Color Bar, Aspect Ratio, Camera, PIP, Image Flip, Zoom, Pixel-toPixel, Freeze Input, Underscan, H/V delay.
B. MENU Operation
Press “MENU” button on the device after power on. The menu used for setting function will display on
the screen.
Press ◄/► buttons to select the sub-menu; then press ENTER to confirm it; after that, press MENU to
return to main menu.
a. Picture
www.newhank.com
6
Page 7
User manual
ITEMS
OPTIONS
Brightness
0 - 100
Contrast
0 - 100
Saturation
0 – 100
Tint
0 – 100
Sharpness
0 – 100
Color Temp
6500ºK, 7500 ºK, 9300 ºK, User
Red
Note: Available only in “User”
mode to choose the color
value you need.
ITEMS
OPTIONS
Center Marker
ON, OFF
Safety Marker
OFF, 95%, 93%, 90%, 88%, 85%, 80%
b. Marker
www.newhank.com
7
Page 8
User manual
ITEMS
OPTIONS
Aspect Ratio
Full Screen, 16:9, 4:3, 1.85:1, 2.35:1
H / V delay
OFF, H&V Delay, V Delay, H Delay
Check Field
OFF, Mono, Red, Green, Blue
Pixel-to-Pixel
OFF, ON
Underscan
OFF, ON
Color Bar
OFF, ON
Zoom
OFF, ×2, ×4, ×6, ×8
Image Flip
OFF, ON
Freeze Input
OFF, Freeze
PIP
Small, Medium, Large, PBP, POP
c. Display
www.newhank.com
8
Page 9
User manual
ITEMS
OPTIONS
Camera
480P (5D-II Mode), 1080I (5D-Ⅲ Mode)
Volume
0 – 100
ITEMS
OPTIONS
LOGO
OFF, ON
Language
English, Chinese
Manufacturer Default
OFF, ON
Back Light
0 – 100
ISP
For program upgrades
d. DSLR Aux& Audio
e. System
www.newhank.com
9
Page 10
User manual
6. SOFTWARE
A. Cross-connection network cable
Note：W: white, G: green, O: orange, Bl: blue, Br: brown
B. Software settings
Connect the LAN port with PC.
Set the PC IP to 192.168.1.XXX network
segment(XXX is a user-definable
parameter).
Open the application program, then
select the monitor which is needed to be
adjusted (Monitor1or Monitor2).
Set the parameter values according to
user's individual requirements.
First, click the "read" button to read
the corresponding parameter value of the
device to the software, secondly, modify
the parameter value on the software,
then, the instruction can be realized on
the device.
www.newhank.com
10
Page 11
User manual
Panel
7” LED IPS
Physical Resolution
1280×800
Brightness
400 cd/m²
Contrast
800: 1
Viewing Angle
178°/ 178°(H/V)
Input Voltage
DC 12V
Input Signal
HDMI, YPbPr, SDI, Video
Power Consumption
≤18W
Operating Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
Dimension (LWD)
482.5×133.5×25.3mm
Weight
2885g
7. SPECIFICATIONS
8. TROUBLE SHOUTING
1. Only black-and-white display:
Check whether the color saturation is properly set up or not.
2. Power on but no pictures:
Check whether the cables of HDMI, YPbPr, SDI and VIDEO are correctly connected or not. Please
use the standard power adapter equipped with the product package. Improper power input may cause
damage.
3. Wrong or abnormal colors:
Check whether the cables are correctly and tightly connected or not. Broken or loose pins of the
cables may cause a bad connection.
4. When power on, the picture shows size error:
Press “MENU → DISPLAY → Underscan” to zoom in/out pictures automatically when receiving HDMI
signals.
5. Other problems:
Please press “MENU” button and choose “SYSTEM→ Manufacturer Default →ON”, then press
"ENTER" button to confirm it.
www.newhank.com
11
Page 12
User manual
6. According to the ISP, the machine can not function properly:
ISP is used for program upgrades, non-professionals do not use. The device will reboot if selected
accidentally!
Note: due to constant effort to improve products and product features, specifications may change
without prior notice.
9. WARRANTY AND CONTACTS
The warranty of this product is 1 year Parts and Labor from the date of purchase. If the fault in the
product is due to improper use of the product or operations carried out by third parties, the warranty is
lost. If the product frame is open, the warranty is lost.
During the warranty period, the unit will be repaired free of charge. Return shipping are the
responsibility of the customer. Return shipping have to be made through your local distributor/dealer.
For any question during the installation, contact our after sales service on the following address:
info@newhank.com
www.newhank.com
12
Loading...