New England Arbors VA68894 User Manual

ASSEMBLY INSTRUCTIONS

The Rosewood Arbor

88.7 in

84.5 in

42 in

47 in

www.edenarbors.com

26.5 in

20 in

24 in

Please read through before starting assembly.

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at

1. Arch Keystone (2)

2. Arches (4)

3.

Arch Rafters (6)

4.

Post Trim Caps (4)

5.

Preassembled Side Panels (2)

6.

Hardware

a)

1 3/4” Wood Screws (14) To attach rafters and keystones to arch

b)

1 1/4” Wood Screws (8) To attach ground stakes to arbor posts

c) 1 1/4” Wood Screws (4) To secure post trim caps to arbor posts
d)

1 3/4” Bolts and T-Nuts*(8) To fasten side panels to arch assembly

e)

1 1/4” Bolts and T-Nuts* (4) To fasten arch sections together

Ground Stakes (4)

7.

(*) T-Nuts are already installed inside the posts.

1

2

3

4

5

Tools You Will Need

• Cordless Drill

• Tape Measure

• Level

• Short Ladder

• Shovel

a

6

c

b

Not to Scale

e

d

General Information

Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.

• We recommend an area approx 10’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

1 800 282 9346, ext #20

7

(Mon. to Fri. 8:00 AM to 4:00 PM EST)

Ver 1.2/DEC 2010

.

1

STEP ONE

Assemble the Arch System

1

Slide the Keystone onto one of the arch section as illustrated.

2

Mate a second arch section and fasten with the provided shorter

(1 1/4”) bolts as illustrated.

3

Slide the Keystone back and center it at the top of the arch.

Fasten with 1 3/4” screw. Repeat for other arch.

4

Align the six arch rafters to the pre-drilled holes and fasten

each rafter with two 1 3/4” screws as illustrated.

www.edenarbors.com

1

2

3

2

4

The Rosewood Arbor