New England Arbors VA68212 User Manual

ASSEMBLY INSTRUCTIONS

The Cardi Planter Box

16 in

16 in

Please read through before starting assembly.

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at

1. Pre-Assembled Side Wall Panels (2)

2. Pre-Assembled Front & Back Wall Panels with Posts Connected (2)

3. Post Caps (4)

4. Floor Boards (3)

5.

Base Trim

(4)

www.edenarbors.com

15.75 in

12 in

15 in

1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).

13.75 in

3

1

2

4

5

General Information

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.

• We recommend an area approx 4’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

Ver 1/Sep 2010

1

Th e Cardi Planter Box

STEP O NE

Connect the Front & Back Wall

to the Side Wall Panels

1

Lay out front wall panel on the work surface.

2

Insert the side walls into the routed holes on the front wall
panel posts until rails bottom out. Push until the locking tabs

snap into place.

3

Insert the three floor boards into the pre-routed hole.

4

Align and insert the pre-assembled back panel to the side wall

panels. Ensure the bottom slats are also inserted into the pre-

routed hole. Push until the locking tabs snap into place.

1

2

3

STEP T WO

Install Post Caps

5

Install the four Post Caps and Base Trims. Push post caps until the

locking tabs snaps into place.

4

5

2

1915 Dove St., Port Huron MI USA 48060

Toll Free Phone: [phone] Toll Free Fax: [phone]

www.edenarbors.com