New England Arbors VA68211 User Manual

A S S E M B LY I N S T RUCTIONS

The Cambridge Raised Planter Box

36 in

Please read through before starting assembly.

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at

1. Pre-Assembled Front & Back Wall Panels with Posts Connected (2)

2. Floor Panels (3)

3. Floor Supports (3)

4.

Pre-Assembled Side Wall Panels

5. Shelf Boards (10)

6. Post Caps (4)

7. 5/8” Stainless Steel Screws (8)

(2)

www.edenarbors.com

35.38 in

5.75 in

24.0 in

1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).

1

2

3

4

5

6

General Information

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.

• We recommend an area approx 4’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

7

Not to Scale

Ver 2.0/SEPT 2011

1

The Cambridge Raised Planter Box

S TEP O NE

Connect the Shelf Boards

to the Back Wall

1

Lay out back wall panel on the work surface.

2

Insert the shelf boards into the routed holes on the bottom rail.

Push until the locking tabs snap into place.

2

3

Insert the two side walls into the back wall panel as shown.

Note the tabbed rail will go on the bottom.

4

Align and insert the front wall to the assembly, ensuring all the

shelf boards snap into place and side walls are inserted.

5

Using the provided 5/8” screws, fasten the side wall to the
front and back wall from the inside of the posts as shown.

Each post will use two screws.

4

3

5

Note Tab

2

The Cambridge Raised Planter Box

www.edenarbors.com