Page 1
6 Stage AIR PURIFIER
CH3000, BL3000
INSTRUCTION MANUAL
CAUTION:
Read manual carefully for proper installation and operation.
Page 2
2
CONTENTS
Specifications ...................................................................................................... 3
Features .............................................................................................................. 3
Introduction .......................................................................................................... 4
Applications ......................................................................................................... 5
Installation ........................................................................................................... 5
Back Cover & Filter Removal .............................................................................. 5
Placing the Unit ................................................................................................... 6
Settings and Adjustments ................................................................................... 8
Maintenance ...................................................................................................... 11
Replacing the Fuse ........................................................................................... 12
Troubleshooting ................................................................................................ 13
Warranty Information ......................................................................................... 15
Page 3
3
SPECIFICATIONS
Model: CH3000, BL3000
Rated Voltage: USA-AC 120V/60Hz, Europe 230V/50Hz
Power Consumption: 40W
Fan Speed (non-grade): 1500-3000 RPM
Air Volume: Max 106 CFM(3 m3/min)
Ion Output ≥5 x 106cm3 (or≥2.5 x 106/cm3)
UV Spectrum: ≥20ìw/cm2(at 10cm-distance), 1PC
Ozone Plates 2PCS, 4 1/2 x 4 1/2 inches (115mm x 115mm)
HEPA Rate: up to 99.97%
Remote Control
Sound Level (DV): Low35 Med45 High50
Product Size in inches: W 9 in x D 11 in x H 12 in
Gross Weight: 14.5 Pounds (6.5Kgs)
Distance ≤10M
FEATURES
Negative Ion Generation Technology
Adjustable Ozone Generation
Activated Carbon Deodorization
UV Bulb & Photo-Catalytic Filter (to kill virus, bacteria & mold)
Washable HEPA Filter (to eliminate small particles and dust)
Adjustable Fan Speed Control(5 speed)
Washable Permanent Pre-Filter
Adjustable Ozone Control(5 grade) and Plate Configuration
Ion Output:20 KV negative ion generator
Ozone Output: Adjustable Ozone output up to 3500 sq ft
Filtration Type: Washable HEPA, Carbon filter and TiO2
Photo-catalytic Filters.
Page 4
Warranty:
3-Year Factory Warranty.
To reduce the risk of electric shock, this equipment has a
grounding type plug that has a third (grounding) pin. This plug will
only fit into a grounding type power outlet. If the plug does not fit
into the outlet, contact qualified personnel to install the proper
outlet. Do not alter the plug in any way.
WARNING! - Do not operate without proper installation. Doing so
may void the warranty.
CAUTION! – Cut off the power when performing maintenance.
If the fuse is blown and needs to be replaced, the current of fuse
should no more than 1.0 Amp.
INTRODUCTION
CH3000,BL3000 air
purifier reproduces the
natural environment
outdoors. It is
designed to create
clean fresh air like the
outdoors with its 6
stages of air
purification processes.
4
FEATURES
Compact
Portable
No Duct Work Required
No Chemicals
Low Maintenance
Low Electrical Usage
Complete User Control
No Residual Contamination
Page 5
5
APPLICATIONS
Home, Office, Restaurant, Hotel
Smoking Areas
Production Areas
Basements
Casinos & Large Meeting Halls
Veterinary Hospital
Barns, Kennels & Stables
Photo Labs & Salons
Day Care Centers
Chemical Odors
Bowling Alleys & Parlors
INSTALLATION
1. Remove unit from shipping carton.
2. Remove all protective materials.
3. Read Owner’s Manual thoroughly prior to installation.
4. Fully insert cord into the power cord receptacle on the back of the unit.
5. Install Ozone and Filters as shown in the steps below.
BACK COVER & FILTER REOVAL
Installing Ozone Plates and Filters
Step 1:
before installing or removing any filters or
maintaining the unit in any way to prevent
electric shock.
Step 2:
cover.
Make sure the unit is unplugged
Push two latches down on back
Page 6
6
Step 3: Remove HEPA filter and all other
filters by pulling out the white ribbon on the
top.
Step 4:
the small brown box. For maximum
performance, Ozone plates may need to be
washed in warm water. Always allow them
to properly dry before installing.
Insert the 2 Ozone plates found in
Step 5: Reinstall all filters in the same order
they were removed and reattach back cover.
Determine placement location and plug unit
into 120-volt outlet.
PLACING THE UNIT
In order to maximize the purification function,
the unit should be placed as high as possible.
Alternately, placing something under the unit
bottom, ensuring the front grill is tilted
upward will better oxidize and purify the
floating bacteria and smog pollutants. A
ceiling fan can also aid the unit with air
purification.
Suggested locations, listed in order of preference:
Nearest to the source of the worst pollutant.
Near cold-air return in an air circulation system.
In the area most frequently used location to achieve maximum benefit.
Page 7
7
Notes:
For maximum control, the unit should be placed where easy access to
the control panel is possible.
The rear of the unit should always have at least six inches of open area
to allow unrestricted airflow.
Be sure power cord is not accessible to small children to prevent injury.
CAUTION!
During Ozone mode this unit should never be placed
where it can blow directly into the face of any person or
Page 8
8
SETTINGS AND ADJUSTMENTS
Buttons function and Operation Descprition
No Name Function and operation instruction
Standby mode: Machine turns on when press Power
1 Power
2 LCD screen Show machine’s work status
button, air purifier start working;: Air purifier off when press
the Power button
3 FAN
PURIFY
4
5 UV light UV light is on or off when UV button is pressed
6 OZONE
AWAY mode
7
8，9，
LED on
10
AWAY mode
11 Receiver
5 speed fan to adjust fan speed, note: the coverage area
change 200 sq. ft each time press the fan button
5 different settings to adjust ozone output, it is
“1-2-3-4-5-0”,0 means stop, note: the coverage area
change 200 sq ft each time when you press PURIFY
Optional Ozone is on or off when press Ozone button,
note: PURIFY does not work when Ozone is off
Air purifier work at max. settings on AWAY mode, the air
purifier is off when timer returns to 0
First time: 0.5 Hour timing off；Second time: 1 hour timing
off
；Third time: 2 hour timing off；4
mode
Indicate timing mode: Ⅰmeans 0.5H；Ⅱmeans 1H；Ⅲ
means 2H.
Infrared receiver, Note: do not block the receiver,
otherwise it will affect the normal working of the air purifier
th
time: back to manual
Page 9
9
1. Press button 3 + 5 at the same time, LCD show 0:00
clock
2. Operate No 4 button within 2 seconds to adjust timer,
Timer off
timer increase 0.5Hr each time press this button
3. Timing function finish, enter autoamatic off mode, back
to previous working status.
Note: press any button to off the timer function when
timer off mode start.
LCD Display
No Name LCD display
Fan working
1
status
HIGH purifying
2
reminder
Coverage area
3
Timing
reminder
Standby
Ozone function
5
reminder
6 Mode
Press FAN to indicate fan working status, to display 1 to 5
fan speed
When the coverage area is more than 2400 sq.ft, the LCD
display show HIGH
It show 1000- 3000 sq. ft during working, the coverage
area change 200 sq ft each time press FAN and PURIFY
button
Timing function is turned on, the countdown clock, purified
area and timer will be Interactive Display
Standby mode display 0000, the LCD backlight off at the
same time.
LCD display”AREA MUST BE UNOCCOPED” when ozone
is on. Note: Ozone has obvious effefct on killing germs and
removing odors, however, excess ozone can have health
effects , therefore, it can be used in unoccuped space only
Display NORMAL（ 1~5 ），HIGH （ 1~3），AWAY（ 1~3
according to different working condition base on purified
area .
Page 10
10
Remote control function and description
No Name Function and operation instruction
Standby mode: Machine turns on when press Power
1 Power
2 Sleep mode
Fan speed
3
increase
Fan speed
4
decrease
Decrease
5
OZONE
Increase
6
OZONE
7 Timer Off
button, air purifier start working;: Air purifier is off when
press Power button
Press one time: enter 1200 sq.ft SLEEP mode
Press 2nd time, enter 1000 sq.ft SLEEP mode
LCD light turns off at SLEEP mode, and the
negative ion, UV, OZONE turn off on SLEEP mode,Press
any button to exit SLEEP mode.
5 speed fan - to adjust the fan speed, press 1-2-3-4-5 to
increase fan speed. Note: each time press FAN button,
coverage area increase 200 sq. ft.
Decrease fan speed from 5-4-3-2-1, and each time press
the Fan, the coverage area decrease 200 sq,ft
5 speed Ozone Adjustment - to adjust ozone output, press
5-4-3-2-1-0, 0 means stop. Note: each time press OZONE,
the coverage area decrease 200 sq .ft
Decrease ozone output from 5-4-3-2-1-0, each time press
OZONE, coverage area decrease 200 sq.ft
1. Press TIMER, display 0:00 clock
2. Press 6 within 2 seconds to adjust time of shut off, press
one time increase 0.5h, the max. timing is 9.5H, and min.
is 0.5H
3. When the time setting is finished, it enters automatic
shut off mode, and back to normal working mode before
time setting.
Page 11
11
Air purifier works at maximum function on AWAY mode
AWAY mode
8
Ozone on/off
9
10 UV on/off UV is on or off when press this button
Press 1 time: shut off after 0.5H；Press 2
after 1hr；Press 3rd time, shut off after 2hr；Press 4th time,
back to manual mode
Press this button to on or off the OZONE
Note: PURIFY does not work if OZONE OFF, OZONE can
only be used in unoccuped space only.
nd
time, shut off
CAUTION!
Always ensure the room or area is UNOCCUPIED
before performing the above-described Ozone control.
MAINTENANCE
Periodic maintenance is required to ensure that the Air Purifier operates
properly. A severely polluted environment can foul an air purifier plate in as little
as four weeks or as long as a year. Shown here are basic maintenance
procedures that should be carried out to keep your unit running at top
performance.
Pre-Filter/HEPA Filter Cleaning:
(Turn to page 5 for removal instructions.)
You have two options to clean filters:
When filter is visibly dirty, simply remove the pre-filter or HEPA filter
and clean the heavy particulate from the screen with a hand-held
vacuum. This method will extend the life of the screen/filter.
When filter is visibly dirty, remove the filter from the unit and wash it in
cool water, brush it gently with a toothbrush to remove particulate. Dry
completely prior to re-installing.
All filters are washable except for the charcoal filter.
Page 12
12
Fan Blade and Front Grill Cleaning:
(Take off front/reinstall grill method.)
To remove for cleaning:
1. As detail on the left shows, hold bottom of
front grill and pull out.
2. When latch releases from front panel, lift
front grill approximately 30 degrees.
3. Pull front grill away from unit in a parallel
motion.
To reinstall after cleaning:
Place top latch of grill in front panel opening.
Push bottom latch of grill into bottom slot.
Cleaning Information:
Wipe off fan blade and front grill with damp washcloth. The fan requires no
maintenance. If the fan squeaks, a drop of lightweight machine oil may be
needed on the fan shaft.
REPLACING THE FUSE
A fuse holder is located on the back of the unit next to the power cord.
To replace or check the fuse:
Remove the fuse holder by pressing on the clip and pulling straight out.
If the fuse is blown:
Replace with the standard replacement fuse. Insert the new fuse into
the fuse holder. Press the assembly straight in until it latches.
120 volt models: Fusing current no more than 1.0 Amp.
Page 13
If the fuse holder cap is not installed correctly,
the unit will not operate.
TROUBLESHOOTING
Indicators of Operation:
(Operation of the Ozone & Power
Indicator lamp.)
Ozone button to be operated when
the room is unoccupied. Open the
door and window when you return to
the room if Ozone operated for
several hours.
Turn the unit on and check that the
small red/orange lamp is illuminated.
The lamp is located on the front
panel; one is silkscreen ‘Power’ and
the other is silkscreen ‘OZONE’.
13
CAUTION!
Troubleshooting – What to look for first:
1. I have plugged in the unit, turned the power switch to "On" and nothing
is happening. What's wrong?
Make sure the electrical outlet is capable of providing power to the
unit.
Check the back cover located at the back of the unit to make sure
it is fully installed and snapped into place. If the back cover is not
fully installed, a safety switch will cause the unit to not power on.
Check to see if the proper fuse is installed and that it is
serviceable.
Ensure that the fuse cap is completely seated and secured in its
receptacle. See Page 12 for more details.
Page 14
14
Be sure the cord is fully pushed in / plugged into unit and also on
the wall outlet side.
Some models are equipped with an On/Off switch on the back of
the unit. Make sure this is switched to On.
2. The fan is operating but the unit won't produce any ozone. What's
wrong?
Check the air purifier plate(s) for serviceability. If they are cracked
or broken, the plate(s) will require replacement.
Ensure maintenance procedures required for the New Comfort air
purifier plate have been performed (i.e. washing the Ozone plates).
See page 6 for more details.
Make sure the Ozone button is pushed to on.
You will know the Ozone is on when a strong smell comes out of
the air purifier. Aside from steps above, do not attempt to
disassemble without contacting customer service from your New
Comfort dealer.
3. The unit has a burning smell, and/or appears to be arcing or sparking.
Remove and clean the ozone plates and reinstall. If problems
persist replace ozone plates.
Ozone produces a smell or odor that smells like bleach or electric
smell. This is normal during Ozone use and why Ozone is so
effective in removing odors.
4. What are the most typical application problems?
Problem: Lack of air movement, improper placement of the unit.
Warning Sign: Strong odors still remain in the environment after
placement.
Problem: Lack of ozone, improper placement of the unit.
Warning Sign: A strong odor of ozone is in the environment.
Problem: Too much ozone accumulation in the environment, as
a result of improper purifier control setting and/or lack of air
movement.
5. Unit does not operate:
Is the unit plugged in?
Is the power cord fully inserted into the back of the unit?
Are you sure the outlet is functioning normally?
Is the unit turned on?
Is the back grill installed properly to depress the safety switch
forward?
6. Air flow is restricted or reduced:
Is the unit properly placed away from objects that may obstruct air
flow?
Are the filters clean?
Page 15
15
Warranty Information:
If your unit fails to operate properly after performing trouble-shooting, contact
your authorized New Comfort dealer you purchased the unit from for further
assistance. If you have contacted them and still have trouble you may then
contact New Comfort by emailing service@newcomfortcleaners.com.
The New Comfort air purifier comes with a 3-year Factory Warranty that covers
the entire unit (except for filters and ozone plates which may need replacing as
they get dirty). For warranty assistance contact the company you bought the air
purifier from for authorized warranty service. For warranty service, the user is
required to pay all shipping costs and the authorized New Comfort Warranty
center shall be responsible for all parts and labor.
Customer Name ________________________________________________
Purchase Date _________________________________________________
Company the unit was purchased from ______________________________
Serial Number of Air Purifier _______________________________________
Loading...