WATER WORKS GASKETS
This is our new Water Works Catalog. All prices are each, F.O.B. Bakersfield, CA. Our terms
are net 30 days. We are continually adding to our product line so please check with us on any
item not shown that you may require.
Newby Rubber, Inc. has been manufacturing since 1958. We are proud of our past record, and
will continue to provide our customers with the service and quality they expect and deserve.
Please feel free to contact us on any requirement you might have.
Our CL-150 gaskets, Transition gaskets and Mechanical joint gaskets are manufactured to
meet ASTM-D-1869-66 Specifications for Rubber Rings for Asbestos Cement Pipe, ASTM
C564-68 Specifications for Rubber Rings for Cast Iron Soil Pipe, AWWA Standard C111/
A21.11-07 and ASTM F477-76 Elastomeric Seals for Joining Plastic Pipe. ASTM C-923
Table 1, Manhole Stop Rings.
SPECIAL ELASTOMERS
NITRILE (BUNA-N)
NEOPRENE
VITON (FLUOROELASTOMER)
EPDM
RESISTANT TO MOST
OIL
LIGHT OIL RESISTANCE
OIL & TEMPERATURE TO 350° F,
GASOLINE, OZONE, HOT WATER
&
STEAM TO 500° F
STORAGE: Recommended storage would be in a plastic bag and/or a cardboard box, in a
cool dry area. Do not store close to electric motors.
STORAGE LIFE:
NITRILE - Several years.
NEOPRENE - Indefinite - Long Life.
VITON (Fluoroelastomer) - Several years.
EPDM - Indefinite - Long Life.
Dear Customer,
Please allow me to take this opportunity to introduce myself. My name is Robert Leiterman
and I am the sales manager for Newby Rubber, Inc. Founded in 1958, we are a rubber
manufacturing facility which produces a wide array of rubber products for industries such as
agriculture, food processing, waterworks, pump, oilfield and the military, to name a few.
Situated on four acres, our manufacturing plant has recently expanded to an 80,000 square
foot facility within 5 buildings.
Compression and transfer molding is done in one of our 37 steam and electric presses,
ranging in platen-size from 6’’ x 6’’ to 48’’ x 48’’ capable of closing pressures up to 450 tons.
The unique automation of our 17 injection molding presses allows us to offer extremely
competitive pricing on relatively small orders.
Our engineering department can design your tooling and have it machined in our on-site
tool and die shop, enabling us to keep cost low and minimize lead time from design to
production.
As we place quality as our top priority, our experienced technicians utilize our state-of-theart lab in order to monitor every aspect of production. This ensures that our customers
receive products that adhere to the most stringent quality guidelines.
Your association with Newby Rubber, Inc. allows you to benefit from our many years of
experience as well as the expertise of a knowledgeable staff. We strive to combine the prompt
and personal service of a small family business with the efficiency and competitive pricing of
a large corporation.
We look forward to hearing from you and being able to be of service.
Sincerely,
Ernie Bentley
Sales Manager
320 Industrial Street, Bakersfield, CA 93307-2706
(
661) 327-5137 • Fax - (661) 327-8058
website: www.newbyrubber.com • e-mail: sales@newbyrubber.com
WARRANTY
Seller warrants its product to be free from defects in material and workmanship under normal use
and service. This warranty shall not apply to defects resulting from misuse, abuse or accidents.
The limit of seller's liability for failure of any of its products to meet the foregoing warranty or
for breach of any other warranty, express or implied, shall be to supply an equivalent amount
of products for any materials returned to seller within three (3) months of shipment and found
to be defective by seller. Due to the widely varying conditions under which seller's products
are used or installed, seller offers no warranty, express or implied, as to their length of service,
life or suitability for any particular purpose. In no event shall seller be liable for incidental
or consequential damages. No person is authorized to bind seller for any further warranty or
obligation beyond that stated in this paragraph.
RETURNING MERCHANDISE
NO RETURNS will be accepted without first obtaining a ‘‘Return Authorization’’ number.
NO CREDIT will be allowed on damaged goods.
There will be a 10% restocking charge on all items
TABLE OF CONTENTS
Item
Page Number
JM RING TYPE CL-100 1
RING-TITE TYPE CL-150/200 2
RT-PVC DUAL HARDNESS 3
RT-DI TO CAST IRON (C-900) PIPE 4-5
PUSH-ON TO C-900 PIPE 6
PUSH-ON TO IPS PIPE 7
MECHANICAL JOINT GASKETS TO C-900 PIPE 8
MECHANICAL JOINT TRANSITION GASKETS TO IPS
MECHANICAL JOINT TRANSITION GASKET TO SDR-35 10
MANHOLE STOP RINGS 11
PIP & IPS GASKETS 12
‘‘C’’ (VICTUALIC) TYPE GASKETS
RUBBER RING PACKING 14
FIRE HYDRANT GASKETS 15-31
9
13
TABLE OF CONTENTS
Item
Page Number
METER GASKETS
WASHER I.D.------O.D.
42
NOZZLE GASKET
44-45
40-41
CAP GASKET
43
Back to Table of Contents
10” CL-100
10064940
12” CL-100
10064945
14” CL-100
10064950
16” CL-100
10064955
18” CL-100
10064960
20” CL-100
10064962
24” CL-100
10064965
10”
12.130
12.060
11.260
11.072
.800
12”
14.370
14.300
13.500
13.312
.800 14”
16.134
10.050
15.090
14.884
.850 16”
18.224
18.140
17.180
16.954
.850 18”
20.994
20.910
19.950
19.744
.850 20”
23.320
23.140
22.180
21.982
.850 24”
27.594
27.520
26.560
26.362
.850
JM RT TYPE CL-100
RING-TITE TYPE FITTING TO AC PIPE
SIZE
DIMENSIONS
PART NO.
SIZE
A B C D E
2004-1
Back to Table of Contents
JM RT TYPE CL-150/200
3” CL-150/200
100650
200
4” CL-150/200
100675
200 6” CL-150/200
100700
200 8” CL-150/200
100725
150 10” CL-150/200
100750
100 12” CL-150/200
100775
100 14” CL-150/200
100800
50 16” CL-150/200
100825
50 18” CL-150
100830
25 20” CL-150
100835
25 24” CL-150
100837
3” 4.665
4.575
3.785
3.689
.790
4” 5.630
5.540
4.750
4.604
.790 6” 7.765
7.675
6.885
6.739
.790 8” 9.990
9.900
9.111
8.965
.790 10”
12.590
12.500
11.711
11.562
.790 12”
14.790
14.651
13.911
13.762
.790 14”
17.284
17.200
16.240
16.014
.850 16”
19.534
19.450
18.490
18.264
.850 18”
22.169
21.950
20.990
20.801
.850
20”
24.394
24.310
23.350
23.124
.850
RING-TITE TYPE FITTING TO AC PIPE
SIZE
PART NO.
PCS/BOX
SIZE
24”
DIMENSIONS
A B C D E
29.084
29.010
2
8.050
27.852
.850
Special material quoted on request.
2004-2
Back to Table of Contents
RT-PVC GASKETS
3” RT-PVC
104200
150
4” RT-PVC
104225
100 6” RT-PVC
104250
75 8” RT-PVC
104275
50
3” 4.665
4.575
4.085
3.545
3.385
1.260
4” 5.630
5.540
5.050
4.510
4.350
1.260 6” 7.745
7.655
7.165
6.625
6.465
1.260 8”
10.040
9.950
9.500
8.720
8.560
1.260
DUAL HARDNESS
RING-TITE TYPE FITTING TO PVC (Iron Pipe Size) TYPE PIPE
SIZE
DIMENSIONS
PART NO. PCS/BOX
SIZE
A B C D E F
Special material quoted on request.
2004-3
Back to Table of Contents
4” RT-DI C-900
104075
150
6” RT-DI C-900
104100
100 8” RT-DI C-900
104125
50 10” RT-DI C-900
104150
25 12” RT-DI C-900
104175
25
4” 5.630
5.540
5.050
4.800
4.640
1.260 6” 7.746
7.655
7.250
6.869
6.709
1.260 8”
10.040
9.950
9.500
9.050
8.890
1.260 10”
12.595
12.500
11.850
11.100
11.010
1.260
12”
14.856
14.761
14.110
13.200
13.110
1.260
RT-DI GASKETS
DUAL HARDNESS
RING-TITE TYPE FITTING TO CAST IRON SIZE (C-900 Type) PIPE
SIZE
DIMENSIONS
PART NO. PCS/BOX
SIZE
A B C D E F
Special material quoted on request.
2004-4
Back to Table of Contents
RT-DI GASKETS
DUAL HARDNESS
RING-TITE TYPE FITTING TO CAST IRON SIZE & C900 O.D. PIPE
4” RT-DI-C900
4.780
5.100
5.530
4.800
6” RT-DI-C900
6.780
7.200
7.630
6.900 8” RT-DI-C900
8.950
9.400
9.830
9.050
10” RT-DI-C900
11.040
11.950
12.380
11.100
12” RT-DI-C900
13.055
14.210
14.640
13.200
DIMENSIONS
SIZE
A B C D
These RT-DI Gaskets are recommended for use with Cast Iron & C-900 pipe and are designed to hold 200# working pressure if all the dimensions are met. No guarantee is given nor should be implied as to the successful usage
of these gaskets. We would particularly like to draw your attention to the “B” dimension of the fitting to be sure it
is small enough to provide ample “back-up” for the gasket. These gaskets have been tested and have been used
successfully in the field.
A-Gasket ID installed.
2004-5
Back to Table of Contents
PUSH-ON GASKETS
DUAL HARDNESS
DUCTILE IRON PIPE - C900 TYPE
SIZE
4” PUSH-ON
107010
125
6” PUSH-ON
107015
75 8” PUSH-ON
107020
50 10” PUSH-ON
107025
25 12” PUSH-ON
107030
25
4” 5.740
4.540
1.000
6” 7.860
6.600
1.000 8”
10.150
8.730
1.210
10”
12.250
10.830
1.300
12”
14.340
12.920
1.300
3” PUSH-ON
PART NO. PCS/BOX
107005
14” PUSH-ON
SIZE
107034
DIMENSIONS
A B C
Special material quoted on request.
2004-6
Back to Table of Contents
PUSH-ON GASKETS - IPS
4” PUSH-ON - IPS
107065
125
6” PUSH-ON - IPS
107070
50 8” PUSH-ON - IPS
107075
25 10” PUSH-ON - IPS
107080
25 12” PUSH-ON - IPS
107085
20
4” 5.740
4.180
1.000
6” 7.860
6.310
1.000 8”
10.150
8.320
1.290
10”
12.100
10.300
1.360
12”
14.310
12.700
1.450
DUAL HARDNESS
IRON PIPE - IPS TYPE TRANSITION
SIZE
Larger Sizes are Available
PART NO. PCS/BOX
DIMENSIONS
SIZE
Special material quoted on request.
A B C
2004-7
Back to Table of Contents
MECHANICAL JOINT GASKETS
3” MJ
102924
—
4” MJ
102925
125 6” MJ
102950
75 8” MJ
102975
50 10” MJ
103000
25 12” MJ
103025
25 14” MJ
103030
25 16” MJ
103035
25 24” MJ
103045
—
3” 4.820
3.860
1.050
4” 5.950
4.680
1.200
6” 7.970
6.700
1.215
8”
10.140
8.875
1.215
10”
12.070
10.840
1.200
12”
14.190
12.930
1.200
14”
16.230
14.990
1.200
16”
18.310
17.070
1.200
24”
26.580
25.340
1.200
MECHANICAL JOINT FITTING TO CAST IRON SIZE (C-900) PIPE.
SIZE
PART NO. PCS/BOX
DIMENSIONS
SIZE
Special material quoted on request.
A B C
2004-8
Back to Table of Contents
MECHANICAL JOINT TRANSITION GASKETS
3” MJ TRANS.
103050
175
4” MJ TRANS.
103075
100 6” MJ TRANS.
103100
75 8” MJ TRANS.
103125
50 10” MJ TRANS.
103150
25
12” MJ TRANS.
103175
25
3”
4.820
3.440
1.035
4” 5.950
4.380
1.237 6” 8.020
6.480
1.238 8”
10.140
8.480
1.250
10”
12.120
10.520
1.250
12”
14.200
12.500
1.250
MECHANICAL JOINT FITTING TO IRON PIPE SIZE (IPS, PVC) PIPE.
SIZE
PART NO. PCS/BOX
DIMENSIONS
SIZE
Special material quoted on request.
A B C
2004-9
Back to Table of Contents
MECHANICAL JOINT TRANSITION GASKETS
4” MJ TRANS.
103184
75
6” MJ TRANS.
103186
50 8” MJ TRANS.
103188
25 10” MJ TRANS.
103190
25
12” MJ TRANS.
103192
25
4” 5.950
4.215
1.237
6” 8.020
6.275
1.238 8”
10.140
8.400
1.250
10”
12.120
10.500
1.250
12”
14.200
12.500
1.250
MECHANICAL JOINT FITTING TO PVC SEWER SIZE (SDR-35) PIPE
SIZE
PART NO. PCS/BOX
DIMENSIONS
SIZE
Special material quoted on request.
A B C
2004-10
Back to Table of Contents
PIP & IPS GASKETS
(Dresser Type, Romac & Others)
ITEM PIPE OD CROSS SECTION PART NO.
A B
2” IPS 2.380” 1/2” x 29/32” 102407
2-1/2” IPS 2.880” 1/2” x 29/32” 102408
3” IPS 2.500” 1/2” x 29/32” 102409
4” IPS 4.500” 7/16” x 29/32” 102410
4-1/2” IPS 5.000” .475” x .900” 102411
5” IPS 5.500” 3/8” x 3/4” 102412
6” IPS 6.625” 1/2” x 1” 102414
6” IPS 6.625” 3/8” x 1” 102416
8” IPS 8.625” 1/2” x 1” 102418
8” IPS 8.625” 3/8” x 1” 102420
10” IPS 10.750” 1/2” x 1” 102422
12” IPS 12.750” 1/2” x 1” 102424
6” PIP 6.140” 3/8” x 7/8” 103650
6” PIP 6.140” 1/2” x 1” 103651
8” PIP 8.160” 3/8” x 7/8” 103652
8” PIP 8.160” 1/2” x 7/8” 103653
10” PIP 10.200” 1/2” x 1” 103654
12” PIP 12.240” 1/2” x 1” 103656
15.3” PIP 15.300” 1/2” x 1” 103658
18.36” PIP 18.360” 1/2” x 1” 103660
20.4” PIP 20.400” 1/2” x 1” 103662
2004-12
Back to Table of Contents
“C” SHAPED TYPE (VICTAULIC TYPE)
2" 105925
500 2 1/2"
105928
300
3" 106000
300
4" 106025
150
5" 106026
150 6" 106050
125
8" 106075
50
10" 106077
50
12" 106079
50
(Fits #77, 78, 75 Couplings)
EPDM*
SIZE PART NO.
PCS/BOX
14"
*Special material quoted on request.
106080
2004-13
50
Back to Table of Contents
RUBBER RING PACKING
4”
104292
6”
104294 8”
104296
12”
104298
4” 5.600
4.210
5.000
4.750
1.100
6” 7.660
6.320
7.125
6.875
1.100 8” 9.880
8.380
9.228
9.032
1.100
12”
13.600
12.300
13.120
12.880
1.100
HYDRO TYPE
SIZE
PART NO.
SIZE
DIMENSIONS
A B C D E
2004-14
Back to Table of Contents
FIRE HYDRANT GASKETS
ITEM
FHG-1 101301
GREENBERG #74 TYPE
FHG-2 101302
4” COREY TYPE
FHG-3 101303
COREY RUBBER TYPE
FHG-4 101304
DELMONTE 86 TYPE
FHG-5 101305
GREENBERG #175 TYPE
PART NO.
2004-15
Back to Table of Contents
FIRE HYDRANT GASKETS
ITEM
PART NO.
FHG #6 101306
FHG #7 101307
4-1/2” VO VALVE RUBBER TYPE
FHG #8
WHARF HYDRANT TYPE
101308
FHG #9 101309 FBS
101309 NoFabric
FHG #10
WHARF HYDRANT TYPE
101310
2004-16
Back to Table of Contents
FIRE HYDRANT GASKETS
ITEM
FHG #11
2-1/2” BALLOTA TYPE
CLOW 850 TYPE
FHG #12 101312
4” BALLOTA TYPE
FHG #13 101313
FHG #14 101314
3-5/16” Diameter
bolt holes on 2.938 B.C.
FHG #15 101315
PART NO.
101311
2004-17
Back to Table of Contents
FIRE HYDRANT GASKETS
IT
EM
PART NO.
FHG #16 101316
FHG #17 101317 No Fabric
101317FBS
GREENBERG TYPE
LUDLOW 4-1/2” VO TYPE
FHG #18 101318
FHG #19 101319
FHG #20
CLOW TYPE
101320
2004-18
Back to Table of Contents
FIRE HYDRANT GASKETS
IT
EM
PART NO.
FHG #21 101321 FBS
FHG #22 101322FBS
FHG #23 101323
FHG #24 101324
2004-19
Back to Table of Contents
FIRE HYDRANT GASKETS
ITEM
PART NO.
FHG #25 101325
FHG #26 101326
FHG #27 101327
FHG #28 101328
AMERICAN DARLING TYPE
2004-20
Back to Table of Contents
FIRE HYDRANT GASKETS
ITEM
PART NO.
FHG #29 101329
AMERICAN DARLING TYPE
GENUINE IOWA
FHG #30 101330
FHG #31 101331
FHG #32
M & H-129 TYPE
FHG #33 101333
101332
2004-21
Back to Table of Contents
ITEM
PART NO.
FHG #34 101334
(New Style)
CLOW PART #12-333
4- 1/4” VANGARD TYPE
FHG #35 101335
(Old Style)
CLOW PART #12-330
FHG #36
WATEROUS TYPE WT77
101336
FHG #37
WATEROUS TYPE WB67
FHG #38
RICH TYPE
101337
101338
2004-22
Back to Table of Contents
ITEM
FHG #39 101339
FHG #40 101340
FHG #41 101341
FHG #42 101342
PART NO.
2004-23
Back to Table of Contents
ITEM
PART NO.
FHG #43 101343
FHG #44
4-1/2” KENNEDY TYPE
101344
FHG #45 101345
FHG #46 101346
2004-24
Back to Table of Contents
ITEM
PART NO.
FHG #47 101347
FHG #48 101348
FHG #49 101349
FHG #50 101350
2004-25
Back to Table of Contents
IT
EM
PART NO.
FHG #51 101351
FHG #52 101352
FHG #53 101353
FHG #54 101354
2004-26
Back to Table of Contents
FIRE HYDRANT GASKETS
IT
EM
PART NO.
FHG #55 101355
FHG #56 101356
FHG #57 101357
FHG #58 101358
2004-27
Back to Table of Contents
FIRE HYDRANT GASKETS
ITEM
FHG #59 101359
FHG #60 101360
PART NO.
5
FHG #61 101361
2004-28
Back to Table of Contents
FIRE HYDRANT GASKETS
ITEM
FHG #62 101362
FHG #63
LUDLOW DRAIN VALVE
FHG #64 101364
PART NO.
101363
2004-29
Back to Table of Contents
FIRE HYDRANT GASKETS
ITEM
PART NO.
FHG #65 101365
FHG #66 101366
CLOW
2004-30
Back to Table of Contents
2004-31
Back to Table of Contents
Back to Table of Contents
PART NO.
METER GASKET
1/8 THICK
PART NO.
METER GASKET
1/8 THICK
400100
400101
2004-41
Back to Table of Contents
PART NO.
WASHER
400300
3/4 ID X 1 3/16 OD X 1/16 THICK
PART NO.
WASHER
3/4 ID X 1 3/16 OD X 1/8 THICK
400301
PART NO.
WASHER
3/4 ID X 1 1/8 OD X 1/8 THICK
PART NO.
WASHER
1 ID X 1 1/2 OD X 1/16 THICK
PART NO.
WASHER
1 ID X 1 1/2 OD X 1/8 THICK
400302
400305
400306
2004-42
PART NO.
2 1/2” CAP GASKET
1/16 THICK
PART NO.
4” CAP GASKET
1/16 THICK
PART NO.
4 1/2” CAP GASKET
1/16 THICK
400210
400220
400225
Back to Table of Contents
3 3/4
4 3/4
2004-43
PART NO.
NOZZLE GASKET
3 1/16” THICK
400330
Back to Table of Contents
2004-44
PART NO.
NOZZLE GASKET
3/16” THICK
PART NO.
NOZZLE GASKET
3/16” THICK
Back to Table of Contents
400320
400310
2004-45
Loading...