New Balance Titanium 100 User Manual

User Manual

www.newbalance-watch.com

100

NM-701.1

Titanium

[A]

[B]

N 1 2

Thank you for purchasing this watch.
Please read this manual thoroughly before using the watch!

Design of the Watch

1

N: Normal
1: First Click
2: Second Click

Stopwatch

Start /Stop

Stopwatch

Split /Reset

Stopwatch

Second Hand

Stopwatch

Minute Hand

24-hour hand

Minute

Hand

Hour

Hand

Second

Hand

Date

Specifications

2

• Time Module VD53

• Chronograph with date

• Titanium case and silicon strap

• 10 ATM

* These specifications might be changed without prior notice.

N 1 2

3.1. - 2.

N 1

3

Date and Time Setting

1. Pull out the crown to the first click.

2. Turn the crown clockwise until the previous day’s date appears.

3. Pull out the crown to the second click when the second hand is
at the 12 o’clock position. It will stop on the spot and rotate the
hour and minute hands by turning the crown. (Check that
24-hour hand is set correctly.)

4. Push the crown back in to the normal position in accordance
with a time signal.

NOTE

- Before setting the time, check the stopwatch second and minute
hands are in the ‘0’ (12 o’clock) position. Please see next chapter
for details.

- Do not set the date hand between 9:00p.m. and 1:00a.m.
Otherwise, it may not turn properly. If it is necessary to set the
date during that time period, change the time to any time
outside it, set the date and then reset the correct time.

- When the crown is at the second click position. Do not press any
button. Otherwise, the chronograph hands will move.