NewAir AC14000H, AC14000E User Manual
PLEASEREADANDSAVETHESEINSTRUCTIONS
NewAirAC‐14000E,AC‐14000H
PortableAirConditioner
Owner’sManual
K0080-1-2
BEFORE USE
GENERAL SAFETY INSTRUCTIONS:
• ALWAYS OPERATE THE UNIT IN AN UPRIGHT
POSITION AND PLACE IT ON A FLAT, LEVEL
SURFACE AT LEAST 14” (36 CM) FROM ANY
OBJECTS OR COMBUSTIBLE SURFACES (FIG 1 &
4).
• DO NOT PLACE OBJECTS ON THE UNIT, AND DO
NOT COVER OR OBSTRUCT THE INLET OR OUTLET
GRILLS (FIG 2).
• CLOSELY SUPERVISE ANY CHILDREN AND PETS
WHEN THE UNIT IS IN USE.
• THIS APPLIANCE IS NOT INTENDED FOR USE BY
PERSONS (INCLUDING CHILDREN) WITH REDUCED
PHYSICAL, SENSORY OR MENTAL CAPABILITIES,
OR LACK OF EXPERIENCE AND KNOWLEDGE,
UNLESS THEY HAVE BEEN GIVEN SUPERVISED TO
ENSURE THAT THEY DO NOT PLAY WITH THE
APPLIANCE.
ELECTRICAL SAFETY:
• THIS APPLIANCE IS FOR INDOOR USE ONLY.
• ALWAYS TURN OFF THE UNIT AND UNPLUG IT
WHEN NOT IN USE.
• DO NOT USE THIS UNIT IN EXCESSIVELY HUMID
OR WET ENVRIONMENTS (FIG 3).
• DO NOT PULL OR PLACE STRAIN ON THE
POWER CORD WHEN MOVING THE APPLIANCE.
• IF THE POWER CORD IS DAMAGED, IT MUST BE
REPLACED BY AN ELECTRICIAN OR
SPECIALIZED TECHNICIAN AUTHORIZED BY THE
MANUFACTURER IN ORDER TO PREVENT FIRE.
FOR MAXIMUM EFFICENCY:
• Make sure doors and windows are closed while the
portable air conditioner is in use. Also keep curtains
and blinds closed during the sunniest parts of the day
while the air conditioner is in operation.
• Frequently clean the portable air conditioner’s filters.
• Once the room or area has reached your desired
comfort level, be sure to reduce the unit’s temperature
and ventilation settings.
1
FIG. 1
FIG. 2
FIG. 3
FIG. 4
K0080-1-2
PARTS LIST
Front: Back:
1. Control panel
2. Louvers
3. Carrying handle
4. Casters
5. Air filters
6. Air inlets
7. Exhaust air outlet
8. Cord wrap
9. Rubber plug / drainage hole
Accessories:
10. Hose adapter (goes over the
exhaust hose and into the back
of the unit)
11. Exhaust hose
12. Round connector (to be used in
between the hose and window kit
or through a wall)
13. Exhaust cap
14. Extendable window kit
15. Drain hose for continuous
drainage
16. Activated carbon filter
17. Remote control
2
K0080-1-2
INSTALLATION INSTRUCTIONS
Installing the Exhaust Hose and Window Kit:
The unit is a portable air conditioner that may be moved from room to room. Hot air must be
exhausted out of the room for the appliance to work. This can be done with the included
window kit or by cutting a hole into a wall.
1. Venting Through a Window (Using the Window Kit)
FIG.5
Window kit
• Attach the round connector to the exhaust hose and secure it in place with screws.
Then, insert the other end of the exhaust hose into the window kit’s round opening.
• Open your window and insert the window kit into the open gap. Adjust the size of
the kit if necessary by sliding the window across so that the window kit is securely
held into place. This technique may also be used for sash windows.
2. Venting Through a Wall
FIG.6
Wall or Window
Round connector
FIG.7
• Cut a 5.95” (151 mm) diameter hole in the wall.
• Insert the exhaust hose through the hole. On the other side of the wall, attach the
round connector to the exhaust hose with screws (Fig. 7). When the air conditioner
is not in use, cover the hole with the provided exhaust cap.
3
K0080-1-2
Positioning the Exhaust Hose:
• Slide the hose adaptor over
the opening on the back of
the unit.
• Then insert one end of the
exhaust hose into the
adapter.
• Avoid kinks and bends in
the exhaust hose. This can
cause moist air to
accumulate, resulting in
overheating and
unexpected shut offs.
• The exhaust hose may be
extended from
12” (300 mm)
to 59” (
1500 mm), but for
maximum efficiency, use the
shortest hose length
possible.
WARNING!
The included exhaust hose is
specifically designed to fit the
specifications of this unit. Do not
extend it with your own hose, as
this can cause the air conditioner to
malfunction.
4
FIG.8
FIG.9
FIG.10
FIG.11
K0080-1-2
Loading...