NewAir AC-10000H, AC-10000E User Manual
PLEASE READ AND SAVE THESE INSTRUCTIONS
NewAir AC-10000E, AC-10000H
Portable Air Conditioner
Owner’s Manual
BEFORE USE
GENERAL SAFETY INSTRUCTIONS:
ALWAYS OPERATE THE UNIT IN AN
UPRIGHT POSITION AND PLACE IT ON
A FLAT, LEVEL SURFACE AT LEAST 14”
(36CM) AW A Y FROM ANY OTHER
OBJECTS (FIG 1 & 4).
DO NOT PLACE OBJECTS ON THE
UNIT A ND DO NOT COVER OR
OBSTRUCT THE INLET OR OUTLET
GRILLES (FIG. 2).
THIS APPLIANCE IS NOT INTENDED
FOR USE BY PERSONS (INCLUDING
CHILDREN) WITH REDUCED PHYSICAL,
SENSORY OR MENTAL CAPABILITIES,
OR LACK OF EXPERIENCE AND
KNOWLEDGE, UNLESS THEY HAVE
BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING ITS USE
BY A PERSON RESPONSIBLE FOR
THEIR SAFETY. CHILDREN SHOULD BE
SUPERVISED TO ENSURE THAT THEY
DO NOT PLAY WITH THE APPLIANCE.
ELECTRICAL SAFETY:
THIS APPLIANCE IS FOR INDOOR
USE ONLY.
ALWAYS SWITCH OFF THE UNIT AND
UNPLUG IT WHEN NOT IN USE.
DO NOT USE THIS UNIT IN
EXCESSIVELY HUMID OR WET
ENVIRONMENTS (FIG 3)
DO NOT PULL OR PLACE STRAIN ON
THE POWER CORD WHEN MOVING
THE APPLIANCE.
IF THE POWER CORD IS DAMAGED,
IT MUST BE REPLACED BY AN
ELECTRICIAN OR SPECIALIZED
TECHNICIAN AUTHORIZED BY THE
MANUFACTURER IN ORDER TO
PREVENT FIRE.
FIG. 1
FIG. 2
FIG. 3
FIG. 4
1
FOR MAXIMUM EFFICENCY:
Make sure doors and windows are closed while the portable air conditioner is in use.
Also keep curtains and blinds closed during the sunniest parts of the day while it is in
operation.
Frequently clean the filters.
Once the room or area has reached your desired comfort level, be sure to reduce the
unit’s temperature and ventilation settings.
2
PARTS LIST
Front Back
FIG.5
1. Display window
2. Control panel
3. Control buttons
4. Louvers
5. Carrying handle
6. Casters
Accessories
13. Hose adaptor (goes over hose and
into the window kit)
14. Exhaust hose
15. Activated carbon filter
16. Extendable window kit
17. Hose for continuous drainage
18. Remote control
FIG.6
7. Cord wrap
8. Air filter
9. Air inlet
10. Exhaust air outlet
11. Air inlet
12. Water plug/drainage port
FIG.7
3
INSTALLATION INSTRUCTIONS
Installing the Exhaust Hose
1. Open the window and insert the window kit into the open gap.
2. Close the window until the window kit is held securely. You may need to adjust the
size of the window kit and secure it with screws. This technique may also be used
for sash windows.
3. Fit the exhaust hose into the exhaust air outlet located at the back of the air
conditioner.
4. Attach the hose adapter onto the exhaust hose.
5. Attach the hose adapter to the window kit.
FIG.8
4
Loading...