New Age 98063 User Manual
Phone:800-255-0104
Fax: 877-877-7687
www.newageindustrial.com
sales@newageindustrial.com
New Age Industrial reserves
the right to modify or make
changes at any time without
notice to materials and
specifications.
JOB:
ITEM:
QTY:
ENCLOSED BAKERY DISPLAY CABINET
APPLICATIONS: Product Display.
CONSTRUCTION: Heavy duty, high tensile,
extruded aluminum. Type 6063-T5 alloy.
UPPER FRAME & TOP: The upper frame is
constructed of vertical uprights 1” x 2 1/2” x 1/8” thick
extruded aluminum channels with top cross and
side bracing of 1 1/4” x 1 1/4” x .070 wall extruded
aluminum tubing, all fully welded together. A solid
cap of .063 thick aluminum is welded to uprights and
cross bracing.
TRAY SLIDES: Slides are 1 1/4” x 1 5/8” x .100” thick
extruded aluminum angle with 1 1/4” lip on front end.
REAR PANEL: Rear panels is .080 thick aluminum
panels with corrugation on each side for strength
and enhanced air circulation. Panel is welded to the
top, bottom, and rear vertical uprights.
DOOR: Custom extruded aluminum frame with
polycarbonate insert. The door is supported by
three stainless steel hinges designed to provide
270° door swing. A positive gravity catch is provided
to retain door in a closed position.
SIDES: Covered with 1/8“ thick polycarbonate that
bolts to aluminum uprights.
TIE ROD: A 1” x 1” x .070 wall extruded aluminum
tube tie rod is welded to the front vertical upright for
extra rigidity.
BOTTOM FRAME: Bottom frame is constructed of
1/8” thick aluminum sheet with four sides bent down
1 5/8”, all corners welded smoothly. Tubular
framework welded inside the 1 3/8” aluminum sheet for
extra rigidity. Caster plates (2 3/4” x 4“ x 3/8” thick
pre-tapped) are welded to bottom of frame.
CASTERS: Four platform type 5” casters, full
swivel design with sealed ball bearing axle and
non-marking wheel.
Model #98063
Phone:800-255-0104
Fax: 877-877-7687
www.newageindustrial.com
sales@newageindustrial.com
New Age Industrial reserves
the right to modify or make
changes at any time without
notice to materials and
specifications.
Model #98063
Model No.
Size-W
Size-H
Size-D
Runner Spacing
Pan Cap.
Wt.
98063
20 7/8"
68 1/4"
27 5/8"
5" TYP.
11
130#
Options
CASTER LOCKS- Add “CL” suffix to model #
CORNER BUMPERS- Add “B” suffix to model #
PERIMETER BUMPERS- Add “PB” suffix to model #
Loading...