R
ASSEMBLY I NS TR UC TION
ne ut ri CO N Cable Connector
Standar d & Crim p Version S R8 A /B
A
B
For crimp version
SR8 A/B only.
When using standard chuck twist shield.
Crimp version
C
SR8 A/B only:
17 mm
[0.670"]
|
4 mm
[0.157"]
Put the bushing onto the cable.
A
B
Prepare cable as shown.
Crimp version only:
C
Fold back the shield.
Slide crimp ferrule onto the cable.
- Use our HX-R-BNC crimptool with the
appropriate die (see ordering info) to crimp
the ferrule.
Wire contacts:
D
Solder standard contacts.
For crimp contacts (BC 1, PC 1) use our
HX-CONTACT crimp tool with the
appropriate positioner (see ordering info).
Snap contacts into insert.
E
Contact Arragement:
Male Female
D
E
Crimp version
only:
G
G
G
2
7
8
6
3
45
Press chuck onto cable.
F
Slide insert and chuck into the housing and
G
G
2
7
8
3
6
4
5
fasten the bushing.
F
F
NEUTRIK AG LI T: +423 / 237 24 2 4 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs Gm bH DE / NL / AT/DK T: +49 8131 / 2 80 890 F: +49 8131 / 280 830
Draft. Nr.: BDA 124 / 3102M12 21 Update: 04.12.2013
( )
I I
Data subject t o change without prior n otice. 2013 NEUTRIK . ALL RIGHTS RESERVED. NE UTRIK are regi stered trademark.
www.neutrik.com
Same procedure for MC & SC housing with
female or male inserts!
NEUTRIK France FR T: +33 1 / 41 31 6750 F: +33 1 / 4 131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 36 63 4733 F: +81 3 / 3 663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2 687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 / 982 05 43 424 F: +91 / 22 261 63 540
©
® ®
R
Loading...