NEUTRIK Tiny Plug
3.5 mm right-angle stereo plug
Assembly Instructions
A
[
]
0.354”
B
C
Sleeve
Ring
4.0 mm
3.0 mm
9.0 mm
[
0.118”
[
0.157”
]
]
®
A
Slide the boot onto the cable.
Prepare cable as shown.
B
Solder the wire ends .
C
Assembly of strain relief:
D
1.
Bend cable by 90° towards the sleeve
contact.
2.
Position the chuck on the connector
body.
3.
Close the strain relief
(break away part if cabel O.D. > 3.2 mm)X
E
Place the shell halves onto the connector
body.
Tip
Slide the bushing up to the thread and
F
tighten it.
2.
D
E
1.
X
3.
5.
4.
F
1.
2.
NEUTRIK AG NEUTRIK Zürich AG NEUTRIK (UK) Ltd. NEUTRIK USA INC. NEUTRIK Tokyo Ltd. NEUTRIK France NEUTRIK Vertriebs GmbH
Liechtenstein Great BritainSwitzerland USA Japan France Germany / Netherlands
Tel.: +423/237 24 24 Tel.: +41 1/736 5010 Tel.: +44 1983/811 441 Tel.: +1 732/901 9488 Tel.: +81 3/3663 4733 Tel.: +33 1/4131 6750 Tel.: +49 8131/28 08 90
Fax: +423/232 53 93 Fax: +41 1/736 5011 Fax: +44 1983/811 439 Fax: +1 732/901 9608 Fax: +81 3/3663 4796 Fax: +33 1/4131 0511 Fax: +49 8131/28 08-30
www.neutrik.com
Draft. Nr.: BDA 128
Update:
Data subject to change without prior notice. 2003 NEUTRIK . ALL RIGHTS RESERVED.©
02.09.2003
/ 3102M1241
®
R
N
E
U
T
R
I
K
R
CONNECTING THE WORLD
Loading...