ASSEMBLY INSTRUCTION
|
NSB*- Stage box Modular Connector Box System
1
Q
Q
2
B
A
1. Assemble strain relief into the end piece with
the hole.
2. A Slide the bushing onto the cable.
B Insert the cable into the strain relief.
3
L max for Size
1 = 180 mm [7.0”]
2 = 300 mm [11.8”]
3 = 420 mm [16.5”]
4 = 540 mm [21.3”]
4
3. Prepare the cable according to the drawing.
4. Insert the wire per channel into the cable
clamps of each connector, check the channel
numbering and the pin numbering of the XLR:
1 = shield
2 + 3 = signal wires
Page 1
ASSEMBLY INSTRUCTION
I StageBox
5
5. Connect the remaining cables with the
connector plates.
- Female plates for INPUTS
- Male plates for RETURNS
6
6. Preassemble the frames and the end piece with
attached self tapping screws.
Insert the rear plate.
7
B
P
P
Assembled Stage box
8
7. A Slide in the assembled connector plates into
the extensions and screw on the end piece with
4 screws.
A
N
E I
ID
SL
B Tighten the bushing of the strain relief.
IN FO R MATI ON
Type A Type B Type C
NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Draft. Nr.: 3102M0621 Update: 23.01.2012
( )
I I
Data subject t o change without prior n otice. 2012 NEUTRIK . ALL RIGHT S RESERVED.
www.rean-connectors.com
©
Page 2
Accessories:
NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
®
Matching luminescent self-adhesive stickers, labelling
groups of 4 connectors in individual row numbers for ”IN”
and ”OUT”are available as accessories.