Neutrik NP2RX-B Instructions
R
ASSEMBLY INSTRUCTION
A
B
NP2RX
NP3RX
NP*RX 1/4” Professional Right-Angle Phone Plug
|
A
Slide the boot onto the cable.
Prepare cable as shown.
B
Solder the wire ends in the order Sleeve, Ring
C
and Tip.
Position the chuck onto the cable and align
D
[ ]
0.16”
4
[ ]
0.39”
10
[ ]
0.78”
20
[ ]
0.32”
8
[ ]
0.20”
5
[ ]
0.12”
3
[ ]
10
[ ]
0.78”
20
0.39”
Ring
Tip
Sle ev e
chuck with plugfinger.
Attention:
If using a cable with O.D. > 5.50 mm [0.216”] break
off marked part of the chuck.
Push the cover to the stop position on the shell.
E
F
Finish the installation by tighten the bushing
onto the connector.
C
Position to solder
the shield.
F
D
E
break off
NEUTRIK AG LI T: +423 / 237 24 2 4 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs G mbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Draft. Nr.: BDA 180 Update: 24.07.2015 Data subject to change without prior notice. 2015 NEUTRIK . ALL RIGHTS RESERVED. NEU TRIK are regis tered trademark.
( )
I I
©
NEUTRIK France FR T: +33 1 / 4131 6 750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 473 3 F: +81 3 / 3 663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2 687 6055 F : +852 / 2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 / 982 05 43 424 F: +91 / 22 2 6163 540
® ®
www.neu trik.co m
R
Loading...