Neutrik NKE6S-2-WOC Datasheet
NKE6S-*
The preassembled etherCON CAT6 patch cables use a shielded
S/FTP cable with cable plug carrier offering a robust metal shell
and Push-Pull locking system.
Attention! Intermates ONLY with NE8FDY-C6* Cat 6 receptacles.
Not compatible with CAT5 and CAT6A chassis connectors.
Features & Benefits
CAT6 compliant - data rate up to 10 GBit/s
•
CAT6 performance - fast data transmission and high
bandwidth applications
•
CAT6 specifications according TIA / EIA 568B, ISO / IEC
11801, EN 50173
•
IP65 - Dust and waterproof in mated condition
•
Shielded system - high noise immunity and EMI
protection
•
Push Pull mating - secure and proven locking system
•
Ready made patch cables with rugged cable carrier
and unique chuck-type strain relief
•
Ordering Information
NKE6S-* Both cable ends with cable plug carrier, e.g. NKE6S-3
NKE6S-*-WOC Only one cable end with cable plug carrier, e.g. NKE6S-3-
WOC
* available lengths: 1 m, 2 m, 3 m, 5 m, 10 m, 30 m
NKE6S-* 1/3
NKE6S-*
Product
Title NKE6S-*
Gender male
Electrical
Contact resistance < 10 mΩ
Dielectric strength 1 kVdc
Frequencyrange 1 - 250 MHz
Insulation resistance ≥ 0.5 GΩ
Rated current per contact 1,5 A
Rated voltage < 50 V
Mechanical
Insertion force ≤ 40 N
Withdrawal force ≤ 20 N
Lifetime > 1000 mating cycles
Wiresize 8 x AWG 27/7 mm²
Locking device Push-Pull
Material
Boot Polyurethan
Contact plating 0.7 µm Au over 1.2 µm Ni plating
Contacts Bronze (CuSn8)
Insert Polyamide (PA 6.6 30 % GR)
Shell Zinc diecast (ZnAl4Cu1)
Shell plating Nickel
Strain relief Polyacetal (POM)
NKE6S-* 2/3
Loading...