Neutrik NE8MX-B Instructions
R
ASSEMBLY IN S T R U C T I O N
®
etherCON NE8MX & NE8MX-B
Ruggedized RJ45 Data Cable Connector Carrier
|
A
STANDARD
VERSION
B
D2
A
A1
SPECIAL
VERSION
Special version remove the cover.
A1
Cut off the release tab of RJ45 plug.
Slide the bushing over the connector
B
onto the cable.
D
D1
or
E
Put chuck onto the cable.the
C
Align the opening with the contact side.
D
Put the suitable boot on the cable:
- D1: for cable O.D. up to 5 mm [0.2"]
C
- D2: for cable O.D. up to 8 mm [0.3"]
STANDARD
VERSION
SPECIAL
VERSION
Position the RJ45 in the chuck.
E
Attention:
RJ45 must be straight.
1
1
Special versions must engage in the
2
inner recess of the chuck.
E
2
1
Page 1BDA 563
etherCON® NE8MX & NE8MX-B
I
F
STANDARD
VERSION
G
SPECIAL
VERSION
F
Position the bushing onto the chuck.
Slide the unit (insert and boot) into the
G
housing and tighten the bushing with
max. torque 3 Nm (2.2 lb-ft).
max. Torque 3 Nm
H
H
0.0 mm
CAUTION:
There is no overlap allowed.
Close the seal of the boot.
II
Find more etherCON
®
details on
www.neutrik.com.
FINISHED etherCON NE8MX:
NEUTRIK AG LI T: +423 / 237 24 2 4 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 19 83 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Draft. Nr.: BDA 563 Update: 14.12.2018 Data subje ct to change without pri or notice. 2018 NEUTRI K . ALL RIGHTS RESERVED. NEUTRIK & ether CON are regist ered trademark.
( )
I I
www.neutr ik.com
®
NEUTRIK France FR T: +33 1 / 41 31 6750 F: +33 1 / 4 131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 / 982 05 43 4 24 F: +91 / 22 261 63 540
©
® ® ®
Page 2
R
Loading...