Neutrik NE8MCB-1 OPERATING & ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
etherCON
|
NE8MC-1, Ruggedized RJ 45
Data Connector with X Series bushing
A
B1
B
C
D
E
A
Slide the bushing over the cable.
Assembly the RJ45 plug on the cable.
B
B1
Cut off release tab of RJ 45 plug.
Put chuck onto the cable.
C
If applicable press the adapter into the port.
D
Position the ring on the cable end
E
(flush to the face)
.
In combination with D the position ring E can
but must not be used depending to the design of
the RJ45 plug.
Slide the connector into the housing.
F
pay attention: the connector latch has to point
downwards (opposite direction of RJ45 lettering)
Slide the chuck in the housing
G
(pay attention to the guiding key)
.
E
standard version
H
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
Draft. Nr.: BDA 132 Update: 20.11.2008/ 3102M1261
()
www.neutrik.com
LI
CH
USA
UK
or
special version
F
G
RJ45
T: F:
+423 / 237 24 24 +423 / 232 53 93
T: F:
+41 44 / 736 5010 +41 44 / 736 5011
T: F:
+1 732 / 901 9488 +1 732 / 901 9608
T: F:
+44 1983 / 811 441 +44 1983 / 811 439
II
Data subject to change without prior notice. 2008NEUTRIK . ALL RIGHTS RESERVED.©
RJ45
Slide the boot to the housing and tighten the
H
bushing .
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH
®
(max. torque 3 Nm)
Ltd.Hong Kong
DE /NL / AT
FR
JP
HK
T: F:
+49 8131 / 280 890 +49 8131 / 280 830
T: F:
+33 1 / 4131 6750 +33 1 / 4131 0511
T: F:
+81 3 / 3663 4733 +81 3 / 3663 4796
T: F:
+852 / 2687 6055 +852 / 2687 6052
Loading...