Neutrik NE8MCB OPERATING & ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
etherCON
|
NE8MC, Ruggedized RJ 45
Data Connector
A
A
standard version
special version
B
E
C
D
E
D1
D2
D
or
C
F1
Special version: remove cover
Cut off release tab of RJ 45 plug
B
C
Slide the bushing over the connector onto
the cable.
Put the suitable boot on the cable:
D
l
D1 for cable O.D. 5mm (0.2”)
l
D2 for cable O.D. 8mm (0.3”)
E
Put chuck onto the cable.
Standard version:
F
£
£
Position the ring on the cable end
(flush to the face)
.
Special version:
If applicable press the adapter into the port.
In combination with E the position clamp F1
F
G
H
K
RJ45
special version
G
standard version
H
can but must not be used depending to the
design of the RJ 45 plug.
I
J
or
I
G
Slide the connector into the housing.
Pay attention: the connector latch has to point
downwards (opposite direction of RJ45 lettering)
J
H
Slide the chuck in the housing
RJ45
(Pay attention to the guiding key).
I
Slide the bushing and boot to the housing
J
and tighten the bushing.
K
Close the seal of the boot
(max. torque 3 Nm).
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
Draft. Nr.: BDA 100 Update: 20.11.2008/ 3102M0861
()
LI
CH
USA
UK
www.neutrik.com
T: F:
+423 /237 24 24 +423 /232 53 93
T: F:
+41 44 /736 5010 +41 44/ 736 5011
T: F:
+1 732/ 901 9488 +1 732/ 901 9608
T: F:
+44 1983/ 811441 +44 1983/ 811 439
II
Data subjectto change withoutprior notice. 2008NEUTRIK . ALLRIGHTS RESERVED.©
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH
®
Ltd.Hong Kong
DE / NL / AT
FR
JP
HK
T: F:
+49 8131 / 280 890 +49 8131 / 280 830
T: F:
+33 1 / 4131 6750 +33 1 / 4131 0511
T: F:
+81 3 / 3663 4733 +81 3 / 3663 4796
T: F:
+852 / 2687 6055 +852 / 2687 6052
Loading...