Neutrik NC3FM-C OPERATING & ASSEMBLY INSTRUCTION

ASSEMBLY INSTRUCTION

ConvertCon

A

|

NC3FM-C, 3 Pole XLR Cable Connector

Slide the boot onto the cable.

B

18

Prepare cable as shown.

4

C

1.

PUSH

2.

Slide back

Slide back the shell (change gender from
female to male).

1.

Hold

D

Insert wires into the terminals and solder
them.

1.

E

Hold

Guiding key

2.

Slide

Put chuck onto the cable and slide insert &
chuck into the housing.

Attention: Pay attention to align the chuck on the

guiding key.

Page 1

F

Handling

MALE

2.

Slide

1.

FEMALE

Finish installation by turning the boot onto
the connector.

PUSH

Easy selectable gender from male to female
and vice versa:

1.

Hold

Convert FEMALE

To change gender hold the boot with one
hand. Press the push down with the other
hand and slide the shell to desired gender.

Connecting two convertCON

Convert MALE

ATTENTION

convertCON does not lock with all chassis connectors!
Pay regard to orientation while connecting two convertCON.

NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.

Draft. Nr.: BDA 212 Update: 30.06.2008/ 3102M1661

()

www.neutrik.com

LI
CH
USA
UK

T: F:

+423 /237 24 24 +423 /232 53 93

T: F:

+41 44 / 7365010 +41 44/ 736 5011

T: F:

+1 732/ 901 9488 +1 732/ 901 9608

T: F:

+44 1983/ 811441 +44 1983/ 811439

II

Data subject to change without prior notice. 2008 NEUTRIK . ALL RIGHTS RESERVED.©

NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK

Vertriebs GmbH

Page 2

®

Ltd.Hong Kong

DE /NL / AT
FR
JP
HK

T: F:

+49 8131 /280 890 +49 8131 / 280 830

T: F:

+33 1 / 4131 6750 +33 1 / 4131 0511

T: F:

+81 3 / 3663 4733 +81 3 / 3663 4796

T: F:

+852 / 2687 6055 +852 / 2687 6052