Neutrik FOPS-SPLIT User Manual
R
HANDLING INSTRUCTION
|
opticalCON FOPS- SPLI T Pulling Soc k
A
B
POSITIONING
Open metal zippe and put the fan-out of the used
A
opticalCON split cable inside the pulling sock.
To avoid stronger tensile force on the connector,
B
the split housing has to be placed directly behind
the integrated velcro strip!
Close metal zipper to protect the opticalCON
C
D
C
connectors from heavy contamination as mud and
dirt.
Tighten the velcro strap to secure the split housing
D
and pulling sock.
FINISH
Page 1
opticalCON - Handling Instruction Pulling Sock - Storage
I
A
B
STORAGE
Reel up attached lettered pulling sock on the cable
A
drum.
Secure opticalCON pulling sock with the black
B
hook on the metal grommet.
NOTE: The proper length of the elastic cord
an be individually adjusted according
the outer diameter of the used drum.
If the elastic cord is not required hook it onto the
C
C
cotton grommet inside the opticalCON pulling
sock.
FINISH
NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: + 44 1983 / 811 4 39
NEUTRIK Vertriebs Gm bH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 8 30
Draft. Nr.: BDA 338 / 3102M20 71 Update: 14.09.2012
( )
I I
Data subject t o change without prior n otice. 2012 NEUTRIK . ALL RIGHT S RESERVED. NEUTRIK are re gistered trademark.
www.neutrik.com
NEUTRIK France FR T: + 33 1 / 413 1 6750 F: +33 1 / 4131 0 511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 605 5 F: +852 / 2687 605 2
©
® ®
R
Loading...