Neutrik FOPS-SINGLE Users Guide

R

HANDLING INSTRUCTION

|

opticalCON FOPS-SINGL E Pu l ling Sock

A

B

PREPARATION

Open metal zipper and attach the strain relief on

A

the cable as illustrated on pic A.

Attention: Make sure that the strain relief is
between the two velcro straps.

Due to the strain relief is the center element for the

B

pulling force, it's important to tighten the cable tie.

With tighten the velcro straps, fix the attached

C

D

C

strain relief and cable on the opticalCON pulling
sock.

Close metal zipper and tighten velcro strap to

D

enhance cable retention of the entire pulling sock.

FINISH

Page 1

opticalCON - Handling Instruction Pulling Sock - Storage

I

A

B

STORAGE

Reel cable with attached pulling sock flat on the

A

used cable drum.

Secure opticalCON pulling sock with the black

B

hook on the metal grommet.

NOTE: The proper length of the elastic cord

can be individual adjusted according
the oute diameter of the used drum.

FINISH

NEUTRIK AG LI T: +423 / 237 24 2 4 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 81 31 / 280 830

Draft. Nr.: BDA 336 / 310 2M2091 Update: 22.10.2012

( )

I I

Data subject t o change without prior n otice. 2012 NEUTRIK . ALL RIGHTS RESERVED. NE UTRIK are regi stered trademark.

www.neutrik. com

NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052

©

® ®

R