NeuroSky MINDWAVE MW3 Quick Start User Manual
1
NO WARRANTIES: THE NEUROSKY PRODUCT FAMILIES AND RELATED
DOCUMENTATION IS PROVIDED “AS IS” WITHOUT ANY EXPRESS
OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OF INTELLECTUAL PROPERTY,
INCLUDING PATENTS, COPYRIGHTS OR OTHERWISE, OR FITNESS FOR ANY
PARTICULAR PURPOSE. IN NO EVENT SHALL NEUROSKY OR ITS SUPPLIERS
BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION,
COST OF REPLACEMENT GOODS OR LOSS OF OR DAMAGE TO INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE NEUROSKY
PRODUCTS OR DOCUMENTATION PROVIDED, EVEN IF NEUROSKY HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. , SOME OF THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION OR LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES. USAGE OF THE NEUROSKY
PRODUCTS IS SUBJECT OF AN END-USER LICENSE AGREEMENT.
The NeuroSky® product families consist of hardware and software components
for simple integration of this biosensor technology into consumer and industrial
end-applications. All products are designed and manufactured to meet consumer
thresholds for quality, pricing, and feature sets. NeuroSky sets itself apart by
providing building block component solutions that offer friendly synergies with
related and complementary technological solutions.
2
Quick Start Guide
MindWave Basics 5
iOS & Android 7
PC / Windows 8-9
Mac OS X 10
Signals Status & Meters 11
Introduction to the MindWave Mobile
MindWave Mobile Product Contents 12
MindWave Mobile headset 12
Setting Up Your MindWave Mobile
Minimum System Requirements for PC/Macs 13
Minimum System Requirements for iOS/Android 13
Replacing the Battery 13
Power 13
LED Light 14
Bluetooth Pairing 15
Bluetooth Connection 15
Serial/COM Port Name or Number 15
Wireless Connection Troubleshooting 16
Using Your MindWave
Fitting the MindWave Mobile 17
NeuroSky Technology Overview
Brainwaves 19
ThinkGear 19
eSense 20
eSense Meter - General Information 20
eSense Meter - Technical Description 21
ATTENTION & MEDITATION eSense 21
Additional Products
Development Tools 3 (DT3) 22
Research Tools 22
Maintenance 23
Troubleshooting and Support 24
Safety and Regulations
Operating Conditions 25
Safety 25
ISO/IEC 25
FCC 25 - 26
Contents
有關說明在中國的訪問：
日本訪問の手順について：
Eine Anleitung in deutscher Sprache
finden Sie unter:
한국어 방문 지침을 보려면 :
Pour obtenir des instructions en visite Française:
Para instruções em Português visite:
Para obtener instrucciones en Español visite:
http://mindwavemobile.neurosky.com
3
4
Quick Start Guide
The fastest way to start your experience
1 - MindWave Basics
Wear, Signal Status & other essentials
2 - iOS & Android
iPhone, iPad, iPod
All Android-Based Mobile Devices
3 - PC / Windows
Windows XP, Windows Vista, Windows 7
4 - Mac OS X
Mac OS X 10.5 or later
5 - Signals Status & Meters
Quick Start Guide - MindWave Basics
5
Insert one (1) AAA battery
Rotate the sensor arm down
Power located here
2 Getting Started Turning on and preparing to pair1 The Headset
6
Quick Start Guide
- MindWave Basics
4
How to Wear the MindWave
The headset should rest on the head as shown below with the sensor tip
touching the forehead, the ear loop behind the ear and the clip attached.
3
Activating Pairing Mode Switch Positions and LED
In this position the headset will be OFF
The LED will be OFF
Slide the switch into this position to manually activate
Pairing Mode. The LED will Flash Blue again for 2 minutes
Quick Start Guide - For iOS & Android
7
For iPhone, iPad, iPod & All Android-Based Mobile Devices
1
Turn on the headset. It should automatically go
into pairing mode with the LED light flashing blue.
If this does not occur, hold the power switch in
the “ON” position for 3 seconds until the light
flashes. The headset is now in pairing mode.
2
Once in pairing mode, refer to your iOS or Android
Bluetooth™ pairing procedure.
3
Select the “MindWave Mobile” device when it
appears. For Android devices enter “0000” as the
Bluetooth authentication key if prompted.
4
The device and headset should now be successfully
paired and the headset's light will turn solid blue.
The headset is now ready to connect to this iOS or
Android device from now on
*The MindWave can remember up to three devices. To clear
the memory hold the switch in pairing mode for ten seconds.
5
Go to the iTunes App Store or Android Market,
and search for “NeuroSky”
6
Download from the list of NeuroSky enabled
applications. We recommend downloading
“Welcome to MindWave” first to get an interactive
walk through of how to use the EEG commands.
7
Enjoy your MindWave Mobile!
Switch LED
8
Quick Start Guide
- PC & Windows
For Windows XP, Windows Vista, Windows 7
2
To install a Bluetooth-enabled device on:
a
Click Start, then Control Panel
b
Open Bluetooth Devices
c
Select MindWave Mobile and click Next
d
Click Apply
e
Click Close to complete pairing
Windows Vista:
a
Click Start, then Control Panel
b
Click Bluetooth Devices
c
Select the Devices tab and click Add
d
Check “My device is setup and ready to
be found”
e
Select MindWave Mobile and click Next
f
Select “Let me choose my own passkey”
and enter 0000
g
Click Finish to complete pairing
Windows XP:
Note Do not insert the application disc yet. You will
need to pair the device successfully and connect first.
1
Turn on the headset. It should automatically go into
pairing mode with the LED light flashing blue. If this
does not occur, hold the power switch in the “ON”
position for 3 seconds until the light flashes.
Loading...