Neuros Audio OSD 6011000 User Manual
Abbreviated Users Guide
Thank you for purchasing a Neuros OSD, the device that lets you digitally store and easily
access your DVD’s, VHS tapes, home movies, and TV shows.
Part 1 - Overview
Purpose of this Abbreviated User’s Guide
This Abbreviated User’s Guide is provided to: (i) give you a brief overview of the OSD and its
capabilities; (ii) show you how to connect your OSD; and (iii) teach you a few basics of how
the on-screen menu system works on your OSD. Once you have your OSD connected and
know these basics, the OSD’s on-screen menu system should guide you through everything
else you may need or want to know.
Free Firmware Upgrades
Your Neuros OSD already does everything it was advertised to do – and more – but we’re
not stopping there. With the help of our rapidly growing worldwide community of users
and open source developers, we will continually update the OSD with exciting new features
and applications. We make these new capabilities available to you via regular “rmware”
upgrades (Note: rmware is just a fancy name for the software that is loaded onto the
OSD). These upgrades are free and can be done in minutes by users of any level (see Part 6
– Upgrading the OSD Firmware).
User’s Manual
The OSD, itself, should guide you through what you’ll want to do. However, a more detailed
User’s Manual with FAQ’s is available at: http://www.neurostechnology.com/support
The User’s Manual is updated with each new rmware version, so be sure to use the User’s
Manual corresponding to your rmware version. If for some reason you choose not to keep
your rmware upgraded to the latest version, archived copies of older rmware versions are
available as well.
Main Functions
Video Recorder - Record video in standard MPEG-4 formats from any device with standard
(i.e. not High Denition) video outputs such as DVD players, Satellite receivers, Cable boxes,
VCRs, DVRs, etc. to virtually any USB storage device (external hard drives, iPod™, PSP™, etc),
any major memory card (SD, MMC, Memory Stick; Compact Flash, microdrive), or directly to
your computer or network attached storage.
Video Player - Play recorded, downloaded, and streamed video (including YouTube) on
your TV from USB storage devices, memory cards, computer/home network, and the
Internet.
Music/Audio Player - Play music, podcasts, and other audio les directly on your stereo
from your from memory cards, USB devices (MP3 players, external hard drives, etc),
computer/home network, and the Internet.
Photo/Image Viewer - View photos and other images on your TV from USB devices
(external hard drives, digital cameras, etc), memory cards, computer/home network, and
the Internet (Note: Internet photo viewing may require a rmware upgrade).
Audio Recorder - Record audio in standard MP3 and AAC formats from any audio source to
any major memory card (SD, MMC, Memory Stick; CF, microdrive), virtually any USB storage
device (iPod™, external hard drives, PSP™, etc), or directly to your computer/home network
(Note: may require rmware upgrade).
Charging/Docking Station - The OSD will charge most USB devices that are plugged into
it, so you can use it as a docking station for your iPod™ and other portables even while
recording to or playing back from them.
Sharing - The OSD has features to make it easy for you to share non-copyrighted content
from the comfort of your living room. Look for more features to be added over time (Note:
may require a rmware upgrade).
CF Card.Microdrive
SD.MS.MMC
Menu Navigation
Contextural Help
Display toggle
on/o
Media playback
Xtra Options Menu
Enter/select
Power
Home menu
IR Out
Serial
Back/Exit
TV Volume
/Mute
TV Channel
One Touch Recording
Svideo IN
Numeric
keyboard
TV Input
NTSC/PAL
TV power
LAN
The OSD remote control contains
specialized keys congured for
controlling the on screen menu
system
USB [host]
A/V In/Out
Included accessories
Two RCA Composite A/V cables (red, white and yellow plugs)
Universal power supply (110 to 240 V)
IR blaster
Stand
IR remote (two AAA batteries included)
Note: some versions may also include a serial cable. If yours does not, and you are a
developer and want one, please visit http://www.neurostechnology.com/support to
request one.
Note Also: some non-U.S. versions may also have RCA-to-SCART adaptors.
Part 2 – Connecting the OSD
If you can set up a VCR, you can set up a Neuros OSD. In fact, the set-up is so easy and the
OSD is so compact you can take it with you on trips or to a friend’s house if you want…. On
the other hand, the OSD looks great as a part of your entertainment center, is silent, has no
moving parts, and automatically passes through any audio or video input signal to your
TV when it’s not in use recording or playing anything or being accessed with the remote,
without any signal degradation. The OSD is turned o by unplugging it (there is no “O”
button), but, since it consumes virtually no power in pass-through mode, there is never any
reason to unplug your OSD unless you want to take it with you.
12
2A. Connecting to Power
1. Connect the included power supply to the wall.
2. Plug the other end into the 5V power input jack on the right
side of the OSD.
3. The dim green light on the top/left side of the OSD should
turn on. The OSD power supply is universal (this means it will
work with any voltage between 110V and 240V).
Note: Power plug adapters may be required for use in
countries outside of the intended one and are not included.
2B. Connecting to TV
You control the OSD using the included remote control and an on-screen menu that the
OSD displays on your TV. Connecting the OSD to the TV allows you to see the on-screen
menu and also allows you to playback video on your TV.
1. Connect one of the included RCA Composite A/V cables to the A/V OUT port on the right
side of your OSD.
TV
R
Audio IN
L
Video IN
2. Connect the RCA composite cable ends to the corresponding inputs on your TV A/V IN
plugs (Yellow=Video, Red=Audio Right, White=Audio Left)
3. Tune your TV to the proper channel for the inputs you just plugged your A/V cable into,
just like hooking up a VCR or DVD player to your TV (ex: Input or Video 1, Input or Video
2, Channel 3, Channel 4... or just change the channel on your TV until you see the OSD
menu).
4. You should see the Neuros OSD startup screen on your TV.
Press the
always bring up the Main Menu of the OSD.
Note: The Audio cables (Red/White) can be connected to your stereo receiver instead of
your TV if you want to play the audio through your stereo instead of through your TV.
The Neuros OSD supports NTSC, PAL standards and SECAM video input. Pressing the NTSC/
PAL button on the remote will switch between NTSC and PAL. NTSC is used in the U.S.
2C. Connecting to Video Source (optional)
This step is required if you want to record video from any of your various video sources
(DVD player, VCR, Game Consoles, Camcorder, TiVo/DVR, camcorder, etc). It is not required
if you only want to stream Internet content to your TV or playback content from memory
cards, USB devices, or your computer.
Note: Virtually all video sources have RCA composite output (Red, Yellow, and White plugs
on the TV) while some video sources also allow the higher quality S-Video output to be
used.
1. Connect one of the included RCA Composite A/V cables to the A/V IN port on the right side
of your OSD. If using S-Video, connect both the S-Video and the RCA cables.
home button if you don’t see anything on the TV screen as doing so will
Note: S-Video cable not included.
2. Connect the RCA composite cable ends to the corresponding A/V OUT plugs of your
video source (Yellow=Video, Red=Audio Right, White=Audio Left).
Note: If using the S-Video cable, you will still need to connect the Red and White
RCA plugs (for audio), but not the Yellow one (which is replaced by the S-Video cable).
Any
Video Source
2D. Inserting Memory Cards or Connecting USB storage devices (optional)
This step is required if you want to directly record to or playback les from memory cards
or USB storage devices. It is not required to access the Internet or to directly record to or
playback from your networked computer.
CF/Microdrive Slot
This slot will accept Compact Flash cards and Microdrives.
Insert as shown on right.
SD/MS/MMC slot
This slot will accept Secure Digital, MS Duo / MS Pro Duo and
Multimedia Cards. Insert as shown on left.
In addition to the standard size cards, you will also be able to
use MiniSD, Micro SD, MMC Mobile and RS-MMC type cards
with the proper adapter. A sampling of the many storage
options are below.
34
Abbreviated Guide.indd 1 9/13/07 11:19:05 PM
USB Port
The USB port on your OSD will allow you to read/write to/from many dierent USB devices,
including external hard drives, iPod™s, USB thumbdrives, and other portable media players
(including MP3 and MP4 players). External hard drives using the standard FAT32 le system
are strongly recommended. Other formats may be supported now or in the future. See
http://www.neurostechnology.com/support for details and updated information.
Note: Almost any hard drive can be formatted to FAT32 (instructions are also at http://
ww.neurostechnology.com/support) and most are by default. If in doubt, you should
consult the packaging or manual from the hard drive manufacturer for more information.
2E. Connecting the IR blaster (optional)
This step is required only if you want to use your OSD to control other devices such as your
cable or satellite box by emulating the remote control signals of these devices. The most
common usage for the IR blaster is to change the channel on your cable or satellite tuner
when doing scheduled TV recordings. This will allow the OSD to record from dierent TV
channels at dierent times without you having to be there to manually change the channel.
1. Go to the Settings Menu from the Main Menu and select IR blaster. Follow the on-screen
instructions to “teach” your OSD how to emulate the remote control of the other device.
You will only need to do this once for each device.
2. When you are ready to use the IR Blaster (like when you’re going to do a timed recording
and need the IR Blaster to change the tuner channel), place the bulb end of the IR
blaster so that the bulb is looking directly into the IR window on the device you want to
control and plug the other end into the IR Out port of the OSD. Remember, the bulb end
of the IR blaster will act just like the IR bulb inside a remote control. It has to be pointing
at the right place (the IR window) in order to work. You can semi-permanently ax the
IR bulb to a table top by exposing the adhesive strip on the bottom of the base that
holds the bulb.
Note: The IR Blaster only works with IR remotes. It won’t work with UHF or other remotes.
Note Also: The IR signal is invisible, so you won’t see the bulb light up when it is activated.
2F. Connecting to the Internet (optional)
This step is required if you want to (i) stream content from the Internet; (ii) receive
automatic rmware upgrades via the Internet (see Firmware Upgrades below); or (iii)
upload or share content from the OSD via the Internet. It is not required if you only want to
record to or playback from USB devices or memory cards.
Note: Like a PC, the Neuros OSD can access the Internet by being connected to a standard
Ethernet router using a standard Ethernet cable (CAT5). If you have a home network that
can connect to the Internet already, you probably already have this equipment. For more
information, please visit the website at http://www.neurostechnology.com/support.
1. Insert one end of a standard Ethernet cable (not included) into an output port on your
router or hub and insert the other into the Ethernet port of the OSD.
2. From the on-screen Main Menu of the OSD, enter the Settings menu and then choose
Network. Follow the instructions there for Connecting to the Internet.
Note: The OSD can also be connected to the Internet wirelessly using a wireless bridge
(not included). Details on how to connect wirelessly will also be provided under Settings
> Network.
Note: Since the Neuros OSD does not have a web browser, you will be able to access
a few selected sites (YouTube initially and others that will be added in future rmware
upgrades.
2G. Connecting to a Computer on a home network (optional)
This step is required if you want to directly record to or playback les from your computer’s
hard drive. It is not required to access the Internet or to record to or playback from memory
cards or USB devices.
Note: You cannot connect the OSD directly to your computer. You will need a standard
Ethernet router to do this step. If you have a home network, you will probably already have
this equipment. If you wish to connect the OSD wirelessly, you will also need a wireless
bridge (not included).
1. Insert one end of a standard Ethernet cable (not included) into an output port on your
router or hub and insert the other into the Ethernet port of the OSD.
2. From the on-screen Main Menu of the OSD, enter the Settings menu and then choose
Network. Follow the instructions there for Connecting to the Network.
3. You may now record to and play back from other PCs on your home network. Note,
however, that you may need to create a shared folder with Full Control permissions for
everyone on your PC. Please refer to http://www.neurostechnology.com/support for
updated support information.
2H. Connecting to Serial Port (optional)
The serial port is primarily used for developers and advanced users. It will allow you to hook
up your OSD to a PC monitor and some types of tuners.
1. Plug single-pin end of included serial cable into the OSD. Plug the multi-pin end into the
PC monitor or other device.
Part 3 Introduction to the OSD Menus
Menus and Navigation
1. A set-up screen may appear the rst time you connect and turn on your OSD. If so,
follow the instructions on this screen.
2. If there is no initial set-up screen, the Main Menu will appear on the OSD. From within
the Main Menu, highlight the Getting Started option on the Main Menu (by scrolling to
it with the UP
Right Arrow to select it.
If the Main Menu doesn’t appear on-screen, press the Home button on the
Note:
remote to bring it up or to return to it at any time.
Note Also:
and show only the source video, if any, on the screen.
3. Read the instructions in the Getting Started menu to learn how to perform various tasks.
4 Hit
What if You Get Lost of Don’t Know What to Do?
Help is Always Just a Click Away. If you want to know what a menu item does or how it
works, simply highlight it by browsing to it, then press the Help button on the remote.
This will bring up a help screen that is specic to the highlighted menu item.
When in Doubt, Hit the Button (Options). Whenever the is visible on the right
side of a given menu selection, you can press the button on the remote for additional
options or information. The options available are specic to the location within the menu
when button is pressed. You will want to experiment with this and use it often because
many cool and often essential features are contained within the
When no buttons are pressed for a period of time, the menu will disappear
Back Arrow
& DOWN keys on the remote), then Press Enter or
to return to the previous menu.
options menus.
56
Part 4 – Choosing the Right Recording Settings for You
One of the most important uses of the OSD is in recording from virtually any video source
into variations of the popular MPEG-4 format (which is to video what MP3 is to audio).
Once in the MPEG-4 form, the video can be: safely stored and organized on hard drives,
portables, or memory cards; easily accessed for playback on TVs and computers; edited;
transferred to portables and other devices for playback on the go; easily shared with others
(non-copyrighted video only!); and so on.
There is one subtlety, though: some portable devices are compatible with only lower
resolution and/or lower quality les, which look great on the small screens of portables but
may not look as good on a TV. Files recorded at the highest resolution and quality levels
will look best on the TV but may not be compatible with smartphones and other portable
devices.
When you make a recording, you can choose the device or devices you plan to use to play
back the recorded le. Your choice here will optimize the resolution for that particular
device, but will not necessarily mean you will not be able to play back your les on your
other devices.
For example, choosing a setting that optimizes the recording for playback on larger screens
like TV’s and PC’s will create larger data les and may make the les unwatchable on some
handhelds. If you care more about having high quality recordings for playback on larger
screens than you do about compatibility with a range of handhelds and have plenty of
available storage space, you may want to choose this setting.
On the other hand, choosing a setting that optimizes the recording for playback on a
handheld like a smartphone will create smaller data les that will be playable on just about
any device (including the TV), but the quality of these les won’t look as good on a TV or
other device with a larger screen. If you want to ensure le compatibility with the greatest
number of devices, want to conserve disc space, and/or don’t mind a lower quality picture
on larger screens, these settings are for you.
For more detailed information, scroll to highlight “Record” on the Main Menu, then press
the Help (?) button or go to http://www.neurostechnology.com/neuros-osd-recording-
settings.
Part 5 – Assigning Permanent Storage (optional)
This step is done to eectively extend the internal memory of the OSD and will only be
necessary if: (i) you want to use database features for organizing and accessing your
music content (activities like searching by artist, album, etc), which will be available in
rmware versions released in October, 2007 or later; or (ii) you want to take advantage
of applications that may be made available in future rmware upgrades that exceed the
available internal memory of the OSD. Any such applications would be optional.
Step 1 From the Main Menu, go to Settings > Permanent Storage and follow the
instructions there.
Part 6 – Upgrading the OSD Firmware (Optional)
See Part 1 - Overview above for an explanation of why you may want to do this from time
to time to take advantage of cool new features that will be added free of charge to the OSD.
These upgrades can be done either manually or automatically.
Manual Firmware Upgrades (use this method if not connected to Internet)
1. Using your computer browser,go to:
neuros-osd
2. Download the latest rmware for the OSD to a memory card or USB storage device.
http://www.neurostechnology.com/upgrade-
3. Once download is complete, plug the memory card or USB storage device into your OSD.
4. Select
Or:
Automatic Firmware Upgrades (recommended if connected to Internet)
1. Make sure your Neuros OSD is turned on and connected to the Internet (see Parts 2.A
2. Go to Settings > Firmware Upgrade and change Frequency from O to Daily or Weekly,
3. Go to Check Now and hit Enter to immediately look for new upgrades. If newer rmware
Part 7 – Troubleshooting the OSD
If you get lost of don’t know what to do, hit the Help or button (see Part 3 above).
If your OSD appears unresponsive to the remote or otherwise appears to lock up, rst
make sure the remote is within range and pointing at the OSD’s IR window (located on
left side of the OSD just to the right of the CF/microdrive slot). If that doesn’t work, try
simply waiting for a minute or two. The OSD will often work the problem out by itself. If
the unresponsiveness persists, re-boot the OSD by unplugging and re-plugging the power
supply (see Part 2A above). You might also try checking or replacing the batteries in the
remote.
If problems persist, go to http://www.neurostechnology.com/support for a complete User’s
Manual, up-to-date FAQ’s, forums, and contact information for Neuros customer support.
Part 8 – Your Feedback is Essential
Perhaps more than any consumer electronics company in history, we rely on our users of
all types to help us make our products the best in the world at what they do. If you nd
something confusing, missing, exciting, or some other adjective, please let us know by
going to http://www.neurostechnology.com/feedback.
This isn’t just an opportunity to vent. While we have to prioritize and balance the needs of
all our users and can’t promise anything, there’s a real chance your insights will show up
in a FAQ, in upgraded instructions on our web site, or even in a future rmware release. It
happens all the time.
Part 9 – Calling all Developers
The Neuros OSD is a collaborative eort between our dedicated full-time internal
developers and our open source community. There are three main areas where our
developer community contributes: documentation, implementation, and testing, all
dened broadly. If you’re a developer and want to learn more, please go to:
http://www.neurostechnology.com/neuros-developer-community
Play/Browse from the OSD Main Menu, browse to the downloaded rmware
le (it will have a .upk extension), and press Enter
installation.
and 2F above).
depending on how often you want the OSD to check for new rmware upgrades.
Then set Select Update Type to Ocial (recommended for mainstream users), Beta
(recommended for users who want the latest rmware but don’t mind a few bugs
as these releases haven’t been as thoroughly tested as the Ocial releases) or Dev
(recommended for developers who want very regular releases and don’t mind that these
releases have not yet been tested by Neuros or the Neuros community). Set Time H:M to
the time of day you want the OSD to look for upgrades (in hours and minutes).
is available, the Neuros OSD will download and immediately begin installing it. Once the
install is complete, the OSD will automatically re-boot with the new rmware installed.
. Then select OK to begin the
78
Abbreviated Guide.indd 2 9/13/07 11:19:09 PM
Loading...