Network Technologies XTENDEX, ST-C5DVI-150 Installation Manual
NTI
NETWORK
R
TECHNOLOGIES
INCORPORATED
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
Tel:330-562-7070
Fax:330-562-1999
XTENDEX
TM
Series
ST-C5DVI-150
150 FOOT DVI VIDEO EXTENDER
Installation and Operation Manual
Software Version 1.2
MAN063 Rev Date 10/4/2006
TRADEMARK
EXTENDEX is a trademark of Network Technologies Inc in the U.S. and other countries.
COPYRIGHT
Copyright © 2006 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.
CHANGES
The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the
right to make changes in the product design without reservation and without notification to its users.
i
TABLE OF CONTENTS
Introduction......................................................................................................................................................................1
Materials..........................................................................................................................................................................1
Features and Functions...................................................................................................................................................2
Limitations .......................................................................................................................................................................3
Preparation for Installation ..............................................................................................................................................3
Installation .......................................................................................................................................................................4
Installing The Remote Unit ..........................................................................................................................................4
Connect the CAT5e cables..........................................................................................................................................4
Installing The Local Unit ..............................................................................................................................................5
Connect The CAT5e/6 Cables.....................................................................................................................................5
Plug-in and Boot Up.....................................................................................................................................................6
DDC Data Configuration..................................................................................................................................................6
Technical Specifications..................................................................................................................................................7
Interconnection Cable Wiring Method.............................................................................................................................7
Troubleshooting...............................................................................................................................................................8
Warranty Information.......................................................................................................................................................8
TABLE OF FIGURES
Figure 1- Connect the Extended Components to the Remote Unit....................................................................................................4
Figure 2- Connect the CAT5e cable to the Remote Unit....................................................................................................................4
Figure 3- Connect the XTENDEX Local Unit to the source and local user......................................................................................... 5
Figure 4- Connect CAT5 cable to Local Unit......................................................................................................................................5
Figure 5- Connect the AC adapter to the Local Unit ..........................................................................................................................6
Figure 6- Configure the XTENDEX for Local Monitor DDC Data Transfer.........................................................................................6
Figure 7- View looking into RJ45 female............................................................................................................................................7
ii
NTI XTENDEX DVI Video Extender
INTRODUCTION
The XTENDEX Series CAT5 DVI Video Extender (XTENDEX) is designed to enable the video output from one digital video
source to be viewed by two users, one local and one remote. The remote monitor can be located as much as 150 feet away
from a CPU via Category 5/5e/ or 6 (CAT5) twisted-pair cable. The local us er monitor will be located near the video source CPU.
The XTENDEX Series Extender is extremely simple to install and has been thoroughly tested to insure reliable performance.
Through the use of CAT5 cable it is possible to economically increase the flexibility of a co mputer system. Here are some of the
features and ways this can benefit any workplace:
• Allows the placement of a DVI-ena bled monitor in a location where only these parts are needed without having the video
source there too, taking up valuable space
• Allows DVI video to be viewed by both a local and remote user (up to 150 feet away)
• Provides crisp and clear resolution up to 1920 x 1200 @ 100 feet (see page 7 for more details)
• Video quality, for varying lengths of cable, is automatically adjustable providing optimum image quality
• Transmits single link DVI-D signal over two CAT5 cables.
• Built-in surge protection.
• Only one power supply is necessary to power both the Local and Remote units.
• Supports local and remote DVI monitors.
• Compatible with DDWG DVI standard.
• HDCP Complia nt
• Supports the DDC2B protocol.
MATERIALS
Materials Included with this kit:
9 NTI XTENDEX Local Unit
9 NTI XTENDEX Remote Unit
9 DVI-D-MM-S-2M 2 meter male-male DVI video cable
9 120VAC or 240VAC at 50 or 60Hz-5VDC/2.0A AC Adapter
9 This owner's manual
Additional materials may be required but are not supplied:
¾ CAT5 unshielded twisted-pair cables terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg. 8 for
proper EIA/TIA 568 B wiring method)
¾ DVI male-male cables to connect the monitor(s) to the Remote and Local units (Order NTI # DVI-IS-xx-MM where x=3, 6, or
10 foot cable). Both DVI-I and DVI-D type cables can be used for this connection.
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com and we will be happ y to be of assistance.
1
Loading...