NETWEEN CUBE Quick Install Manual

Netween Cube

http://www.netween.co.kr

For more information, refer to the detailed manual on the Netween homepage.

Netween Cube

Quick Install Guide

Presentation by Netween Inc.

Product Composition

Before installation, be sure to check the following configurations below.

Types or colors of products may be slightly different depending on the user’s PC environment.

Adopter

Stand

Install App ( i-Phone & Android )

▶ Scanning the QR code, you can install the ‘netween cube’app.

Cable
(3M)

Netween cube

Quick install guidescrew

※Please remember master and Sub-user having different sign up ways.

<Master>

The user who register at the first is called Master. Master can be allowed all the information of the registered Netween cube.

<Sub-user>

Except of master user, all the other users are called ‘Sub-user’. Sub-user only can watch the video. He/she can not be allowed to accept the

information.

Sub-user can register on the smartphone as a QR code, serial number, and master’s URL sharing.

Only master have the authority to control the setting.

Before installing, please make the Netween cube AP mode. The default is station mode.
Plugging in the product, please wait to finish to boot. It will take about one minutes.
In case of booting on AP mode, there is a “NETWEEN_xxxx” in your smartphone WiFi list.

Before installing, please be sure to read the precaution notes below.

• Registration method (Station mode): When pressing the reset button for 2 seconds on the back of product, it will sound “ding~.” At this time, a

cube is ready to be registered in the name of “NETWEEN_xxxx.” If “ding~” sounds only once, press for 2 seconds once again and check you hear

“ding~ ding~”

• Setting method (AP mode): As a cube is connected to the router, you can view images from a remote location.

• Reset button

pressing for 2 seconds: a video transmission mode from the registration mode, or vice versa set.
pressing for 7~10 seconds: It becomes a full initialization. You should reregister a registered cube.

Reset button

Installation Precautions

Registration : Master and Sub-user

1

32 4

Method of Use of Smartphone App (Product Registration- Master Registration)

Click the Online.

Search ‘netween cube’

at app store or google

play store and install.
Run the app.

netween cube

setting

Smartphone and product have to be
connected same router.

Before registering on the app, please
connect the smartphone the router which
is going to connect the product.

Click the ‘Plus’ button.

Method of Use of Smartphone App (Product Registration- Master Registration)

Click the “Setting Netween cube WiFi” .

It is second botton.

4

Take a picture of the QR code on the top

of a product, and enter a camera name.

If you want to write down the serial
number directly, click the blue button of
the bottom.

4 65

Enter a camera name, and click the “confirm”

You can write directly the serial number.

Enter the name

Serial number

Click

Android no.7,8

IoS no. 9,10

Method of Use of Smartphone App (Product Registration- Master Registration)

Select “WiFi Settings”.

Select router that the product will be connected and then enter the WiFi

password.

※smartphone and router have already connected.

router p/w

123456789

If you want to change the router?

Click the router is connected on
your smartphone now.

Finishing the router setting, click the “next”

Smartphone find automatically the Netween cube and register.

You can find the ‘NETWEEN_xxxx’ on the list.

Having connected router’s name

Connecting the ‘NETWEEN_xxxx’,

click the back sign button.

If the smartphone connect the
other router, click the
‘NETWEEN_xxxx”

※ If there is no “NETWEEN_xxxx”, please check the AP mode or not.

After connecting ‘NETWEEN_xxxx’, click
it.

7 8

No.8 is only for android version V6.0.1 and over this version.
Below the android version V6.0.1 version, this step is skipped.

V6.0.1

(marshmallow)

Method of Use of Smartphone App (Product Registration- Master Registration)

9 10

Select “WiFi Settings”.

Select router that the product will be connected and then enter the

WiFi password.

※smartphone and router have already connected.

Having connected router’s name

router p/w

123456789

If you want to change the router?

Click the ‘WiFi set-up’ and change.
Click the back on the top of the

screen, and come back to this screen.

무선인터넷 설정

Finishing the router setting,
click the “next”

After clicking Iphone WiFi set-up, set NETWEEN_XXXX.

Click

Getting back ‘Netween cube’ app.

• Click ‘iphone WiFi set-up’, appearing

the WiFi list screen like this.

• Select the “NETWEEN_xxxx”

• Connecting, click the back sign, and

come back to this screen.

*IOS10
There is no ‘WiFi Setting’ button.

Please select the router on the iphone’s

setting app, and click the router directly.

Method of Use of Smartphone App (Product Registration- Master Registration)

11

 Blinking: Camera and router disconnected. There is ‘Offline’ on the list.

LED On LED Off LED On LED Off

LED On

 Stopping the LED blink:

Camera and router connection is right and AP mode.
There is ‘Online’ sign on the list.

Once the list is complete, the product registration is created. It will mark “online”, and if the front of LED flashing stops, the status is completed.

Registration as a master
is blue.

two ch / four ch

Camera info and set-up

Registration as a Sub-user is

white.

☞For more information, refer to the detailed manual on the Netween homepage.

1 2

Sub-user Master

Sharing Way 1. Remote Registration; Link Transmission(Sub-user Registration)

Run the App. After touching the share button at the top, Select the text

message, or instant messaging apps.

• Master = The first cube registrant. He/she can accept all the information

• Sub-user = The registrant who can register from master’s URL. He/she can not accept all the information.

Being able to sharing Netween cube is blue color.

You can sharing on the messenger APP. ex)

Sharing Way 1. Remote Registration; Link Transmission(Sub-user Registration)

Master user select the messenger app, and send the

message.

When recipient touch a link, go to the cube app.

Register automatically.

3 4

Master Sub-user

※The link can’t be copied and pasted.

Sharing Way 2. QR Code Input Recognition, Sharing Request(Sub-user Registration)

netween cube

Run the app. Click the Online. Click the ‘Plus’ button. Take a picture of the QR code

on the top of a product, and

click the complete button.

enter the name

Click

Sub-user

1 ~7

Click

Enter the product name. Click the Complete. Click the play Icon. Ask master to sharing.

The Method of Use of Smartphone (watching the video, voice calling)

By clicking the icon created by the list, it is connected to the camera and you can view the video.
If you turn the smartphone, it switches to landscape mode, which enables you to see a large screen.

When you zoom with your finger, you can see the
enlarged image.

You can make a voice call in the status of touching the microphone icon.

(Microphone icon becomes red.)

 When you touch the screen, various setting icon appears.

Audio reception function

snapshot (smartphone storage)

block of incoming voice

audio transmission function

mirror image

upside down image

high-definition video reception

HDHDVGA

VGA

standard definition video reception

You can upgrade of the Netween cube’s inside.
When you upgrade firmware, please do not use other application. If you do that, the upgrading would be failed.
Master only can upgrade firmware. Sub-user can’t be allowed.

Click the edit. Click the set-up icon. Click “Firmware upgrade”

on the set-up screen.

Camera Firmware Version

Netween cube connected router

IP address

Setting WiFi

Firmware Upgrade

Firmware Upgrade

If the firmware has already the latest version, you can see this message.

Setting upgrade.

(About 60sec)

Download firmware from
the server.
(About 20sec)

Upgrading the product.
(About 120sec)

Complete.

When you upgrade firmware, please do not use other application. If you do that, the upgrading would be failed.

Click the OK

Edit and Delete

Click the edit Click the set-up icon

Edit

Delete

Setting Page Changing the name

Changing the router

Type the router’s p/w and click the ‘save’

Click the trash can

Standard time

It can search and
select the router

around the Netween

cube.

http://www.netween.co.kr

Presentation by Netween Inc.