NetView HNP117, HNP119 User Manual

USER
MANUAL
User Manual
17” / 19” High Brightness LCD 1000 cd/m²
HNP117 / HNP119
1U LCD Drawer
Options :
- AV / HDMI / Audio
- Touchscreen / DC power
Contents
< Part. 1 > HNP117 / HNP119
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
P. 1 P.1 - 2 P. 3
< Part. 2 > Specifications / OSD
2.1 Product Specifications
2.2 On-screen Display Operation ( OSD )
P.4 - 5 P.6 - 7
< Part. 3 > Options
3.1 HDMI, S-Video + BNC & Audio
3.2 H17” / H19” Touchscreen : Resistive, Capacitive
3.3 48V, 24V or 12VDC power
P. 8 P. 9 P.10
User Manual
Before Installation
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the place has a good ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet.
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1 Disconnect the power cord. 2 Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1 Disconnect the power cord. 2 Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfi ber cloth fi rst, not directly on the parts you are cleaning.
3 Gently wipe the surface. Use as little pressure as possible. 4 Wait until your monitor is completely dry before plugging it in and powering it up.
User Manual
<Part 1 >
< 1.1 > Package Content
HNP117 / HNP119
HNP117 or HNP119 unit X 1
- 6ft VGA cable X 1
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the pure model ( VGA and DVI-D only ). It varies with options such as HDMI, AV, audio, touchscreen & DC power.
< 1.2 > Structure Diagram
1
3
P.1
User Manual
< 1.2 > Dimension
Model
Product Dimension (W x D x H)
Packing Dimension (W x D x H)
Net
Weight
Gross
Weight
HNP117 series
441.6 x 500 x 44 mm
17.4 x 18.9 x 1.73"
590 x 687 x 120 mm
23.2 x 27 x 4.7”
10.5 kg 23 lb
16.5 kg 36 lb
HNP119 series
441.6 x 500 x 44 mm
17.4 x 19.7 x 1.73"
590 x 687 x 120 mm
23.2 x 27 x 4.7”
12.5 kg 28 lb
18.5 kg 41 lb
The weight is only for the pure models. It varies with accessories & options such as HDMI, AV, audio, touchscreen & DC power.
P. 2
User Manual
< 1.3 > Installation - How to install
Installation Slides
HNP117 / 119
Step 1 1
Insert the left and right rear mounting brackets
into the display drawer.
Step 2
Measure the depth of the front and rear mounting
rails.
Align each rear mounting bracket to a suitable
length.
Step 3
Complete the installation
Fix the display drawer into the rack.
M6 screw, cage nut & cup washer x 8 are provided.
P. 3
User Manual
<Part 2 >
< 2.1 > Product Specifications
LCD Panel
HNP117 HNP119
Panel Size ( diagonal ) 17-inch TFT color LCD 19-inch TFT color LCD
Display pixel ( dots x lines ) 1280 x 1024
1280 x 1024
Brightness ( typ. ) 1000
1000
Contrast Ratio ( typ. ) 1000:1
1000:1
Color 16.7 M
16.7 M
Viewing Angle ( L/R/U/D ) 85/85/80/80
80/80/80/80
Response Time ( ms ) 5 5
Dot pitch ( mm ) 0.264
0.294
Display Area ( mm ) 337.92H x 270.33V
376.32H x 301.05V
Surface treatment Anti-glare Haze 25%, Hard-coating
Surface hardness 3H 3H
Backlight Type LED LED
MTBF ( hrs ) 50,000
50,000
Video Connectivity
Digital
HDMI HDMI 1.1, CEA-861-D
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Composite ( BNC ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Audio Connectivity
Audio Input Connector 3.5mm stereo jack
Impedance / Power level
30kQ / 750mV
Audio Output Connector 3.5mm stereo jack
Resistance / Power level
30kQ / 2.8V
Speaker Output Power
2 x 2W
*When the audio output is connected, speaker output is OFF
Power
Power Supply Range
Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Screen display ON 35W or less
Power saving mode 4W or less
Power button OFF 1W or less
Regulatory
Safety Approval cUL, FCC & CE, RoHS
User Manual
HNP117 / HNP119
Environmental Conditions
Operating Temperature 0 to 50°C degree
Humidity 20~90%, non-condensing
Storage Temperature -5 to 60°C degree
Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
Physical Specifi cation
HNP117 HNP119
Product ( W x D x H )
441.6 x 500 x 44 mm
17.4 x 18.9 x 1.73 inch
441.6 x 500 x 44 mm
17.4 x 19.7 x 1.73 inch
Packing ( W x D x H )
590 x 687 x 120 mm
23.2 x 27 x 4.7 inch
590 x 687 x 120 mm
23.2 x 27 x 4.7 inch
Net Weight 10.5 kgs / 23 lbs 12.5 kgs / 28 lbs
Gross Weight 16.5 kgs / 36 lbs 18.5 kgs / 41 lbs
Applicable Format
DVI-D / VGA Input PC Signal 1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz 720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P. 5
User Manual
< 2.3 > On-screen Display Operation ( OSD )
P. 6
User Manual
< 2.3 > On-screen Display Operation ( OSD ) HNP117 / HNP119
P. 7
User Manual
<Part 3 >
< 3.1 > Options :
- HDMI ( HDMI 1.1, CEA-861-D )
- AV ( S-Video + Composite, BNC )
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
( 1 ) Either HDMI or DVI-D can be selected. ( 2 ) For the above options, casing depth will be extended from 500mm ( 19.7" ) to 570mm ( 22.4" )
P. 8
User Manual
< 3.2 > Options : Touchscreen & driver
RP-H17” / H19" USB Touchscreen Specification
HNP117 / H119
Model Technology
Touch Point Method Activation Force Durability Response Time Optical Transmittance Surface Hardness Haze Glass Connector Compatibility
17’ 19” 17” 19”
TRB e-Resistive TCB e-Capacitive
5-Wire Resistive Capacitive
Single Single
Stylus or Finger Finger
< 50g / Stylus=R0.8 < 50g
35 million touches 300 million touches
15 ms 20 ms
80% ± 3% 93% ±2%
3H 9H
8% ± 3% 7%
1.4 ±0.2 mm 3.2 ±0.2 mm 2.8 mm ±10% 2.8 mm ±10%
USB Type A USB Type A
Windows 7 / XP / Vista, Linux Windows 7 / XP / Vista, Linux
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc For detailed information, please refer to the attached CD disc As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
For touchscreen option, casing depth will be extended from 500mm ( 19.7" ) to 570mm ( 22.4" )
P.9
User Manual
< 3.3 > Options : DC Power
Model
24V 48V
Input rating
Input voltage: 24-Volt 48-Volt
Input range: 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA
- Full load 4880 mA 2442 mA
Output rating
Output voltage: 12-Volt 12-Volt
Output current: 8.3A 8.3A
Effi ciency
85% 86%
*** For DC power option :
( 1 ) Option excludes 1 x power cord and 1 x AC power adapter. ( 2 ) Casing depth will be extended from 500mm ( 19.7" ) to 570mm ( 22.4")
i-Tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.iTechLCD.com
User Manual
Loading...