Net Safety Monitoring UDM-001, UDM-002 Operating Manual

Reference Manual

MAN-0116, Rev 3

March 2016

Net Safety™ Universal Duct Mount
UDM-001 and UDM-002

Important Instructions

dangerous substances. Comply with all information on the product, in this

Do

Net Safety designs, manufactures, and tests products to function within
specific conditions. Because these products are sophisticated technical
instruments, it is important that the owner and operation personnel must
strictly adhere both to the information printed on the product nameplate
and to all instructions provided in this manual prior to installation,
operation, and maintenance.

Installing, operating, or maintaining a Net Safety Product improperly
could lead to serious injury or death from explosion or exposure to

manual, and in any local and national codes that apply to the product.
not allow untrained personnel to work with this product. Use Net Safety
parts and work procedures specified in this manual.

Notice

The contents of this publication are presented for informational purposes
only, and while every effort has been made to ensure their accuracy, they
are not to be construed as warranties or guarantees, expressed or
implied, regarding the products or services described herein or their use
or applicability. All sales are governed by Net Safety’s terms and
conditions, which are available upon request. We reserve the right to
modify or improve the designs or specifications of such products at any
time.

Net Safety does not assume responsibility for the selection, use or
maintenance of any product. Responsibility for proper selection, use and
maintenance of any Net Safety products remains solely with the purchaser
and end-user.

To the best of Net Safety’s knowledge the information herein is complete
and accurate. Net Safety makes no warranties, expressed or implied,
including implied warranties of merchantability and fitness for a
particular purpose with respect to this manual and, in no event, shall
Net Safety be liable for any incidental, punitive, special or
consequential damages including, but not limited to, loss of production,
loss of profits, loss of revenue or use and costs incurred including
without limitation for capital, fuel and power, and claims of third
parties.

Warranty

1. Limited Warranty. Subject to the limitations contained in Section

10 (Limitation of Remedy and Liability) herein, Seller warrants
that (a) the licensed firmware embodied in the Goods will execute
the programming instructions provided by Seller; (b) that the Goods
manufactured by Seller will be free from defects in materials or
workmanship under normal use and care; and (c) Services will be
performed by trained personnel using proper equipment and
instrumentation for the particular Service provided. The foregoing
warranties will apply until the expiration of the applicable
warranty period. Refer to Section
this product. Products purchased by Seller from a third party for
resale to Buyer (Resale Products) shall carry only the warranty
extended by the original manufacturer. Buyer agrees that Seller has
no liability for Resale Products beyond making a reasonable
commercial effort to arrange for procurement and shipping of the
Resale Products. If Buyer discovers any warranty defects and
notifies Seller thereof in writing during the applicable warranty
period, Seller shall, at its option, (i) correct any errors that
are found by Seller in the firmware or Services; (ii) repair or
replace FOB point of manufacture that portion of the Goods found by
Seller to be defective; or (iii) refund the purchase price of the
defective portion of the Goods/Services. All replacements or
repairs necessitated by inadequate maintenance; normal wear and
usage; unsuitable power sources or environmental conditions;
accident; misuse; improper installation; modification; repair; use
of unauthorized replacement parts; storage or handling; or any
other cause not the fault of Seller, are not covered by this
limited warranty and shall be replaced or repaired at Buyer’s sole
expense and Seller shall not be obligated to pay any costs or
charges incurred by Buyer or any other party except as may be
agreed upon in writing in advance by Seller. All costs of
dismantling, reinstallation, freight and the time and expenses of
Seller’s personnel and representatives for site travel and
diagnosis under this limited warranty clause shall be borne by
Buyer unless accepted in writing by Seller. Goods repaired and
parts replaced by Seller during the warranty period shall be in
warranty for the remainder of the original warranty period or 90
days, whichever is longer. This limited warranty is the only
warranty made by Seller and can be amended only in a writing signed
by an authorized representative of Seller. The limited warranty
herein ceases to be effective if Buyer fails to operate and use the
Goods sold hereunder in a safe and reasonable manner and in
accordance with any written instructions from the manufacturers.
THE WARRANTIES AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. THERE
ARE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR
IMPLIED, AS TO MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR
ANY OTHER MATTER WITH RESPECT TO ANY OF THE GOODS OR SERVICES.

5.2 for the warranty period of

2. Limitation of Remedy and Liability. SELLER SHALL NOT BE LIABLE FOR

DAMAGES CAUSED BY DELAY IN PERFORMANCE. THE REMEDIES OF BUYER SET
FORTH IN THE AGREEMENT ARE EXCLUSIVE. IN NO EVENT, REGARDLESS OF
THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN
CONTRACT, INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR
OTHERWISE), SHALL SELLER’S LIABILITY TO BUYER AND/OR BUYER’S
CUSTOMERS EXCEED THE PRICE TO BUYER OF THE SPECIFIC GOODS
MANUFACTURED OR SERVICES PROVIDED BY SELLER GIVING RISE TO THE
CLAIM OR CAUSE OF ACTION. BUYER AGREES THAT IN NO EVENT SHALL
SELLER’S LIABILITY TO BUYER AND/OR BUYER’S CUSTOMERS EXTEND TO
INCLUDE INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES. THE TERM

“CONSEQUENTIAL DAMAGES” SHALL INCLUDE, BUT NOT BE LIMITED TO, LOSS
OF ANTICIPATED PROFITS, REVENUE OR USE AND COSTS INCURRED INCLUDING
WITHOUT LIMITATION FOR CAPITAL, FUEL AND POWER, AND CLAIMS OF
BUYER’S CUSTOMERS.

Reference Manual Table of Contents

MAN-0116, Rev 3 March 2016

Contents

Section 1 : Introduction............................ 1

1.1 Models covered ................................................. 1

1.2 Service support ................................................ 1

1.3 Return of material ............................................. 1

1.4 Product recycling/disposal ..................................... 1

Section 2 : Installation............................ 2

2.1 Unpacking and inspection ....................................... 2

2.2 Dimensions ..................................................... 3

2.3 Mounting ....................................................... 4

2.3.1 Field installation ...................................... 5

2.3.2 General requirements .................................... 5

2.4 Installation procedure ......................................... 6

Section 3 : Operation............................... 8

3.1 Operation notes for APM sensors ................................ 9

3.2 Operation notes for gas sensors ................................ 9

3.3 Factors to consider for operation .............................. 9

3.4 Principles of operation ....................................... 10

Section 4 : Maintenance............................ 14

4.1 Troubleshooting and cleaning .................................. 14

4.2 Storage ....................................................... 14

4.3 Spare parts and accessories ................................... 14

Section 5 : Specifications......................... 16

5.1 Environmental ................................................. 16

5.1.1 Metallurgy ............................................. 16

5.1.2 Weight ................................................. 16

5.2 Warranty ...................................................... 16

Section 6 : Ordering information................... 17

Table of Contents I