Net Safety Monitoring RM2 Specifications

RM2 Millennium Controller

BCR-0030-00-003

RM2 Millennium

2-channel Rack Mount Controller

The RM2 Millennium’s design provides flexible configuration, simple operation and maintenance, and intelligent functions that will save time and improve your bottomline.

 Calibration/Reset Button Programming, Clearing

Alarms or Calibrations  High Intensity LEDs Indicate Fault and Alarm  RS-232 Serial COM Port Connect a Laptop or PDA

for Setup and Event Logging  Five Jumper Selectable Relays Normally Open or

Closed  Relay Set Points High/Low = Gas

Fire/Fault = Flame  Two 4–20 mA Analog Outputs for Gas and Flame

Detectors  Four Character Scrolling Display – Visible in all

Lighting Conditions  English, Spanish, French Menu Languages Available

Product Data Sheet

July 2012

RM2 Millennium Controller

Features and Benefits

The Millennium RM2 is a 2-channel rack mount controller designed to off er you the ultimate in control and versatility. Create a monitoring system to suit your installation by

combining any of Net Safety’s  ame or gas detection solutions

to a centralized display to cover multiple zones with a single monitoring device.

The RM2’s independent channels eliminate the standard

industry limitation of monitoring only ame or only gas by adding a new level of exibility — combining ame and/or gas

detection into a single monitoring device. And with the RM2’s independent channels, activity on one channel does not affect the other channel so a variety of tasks and activities can be performed without initiating false alarms.

Setup, operate, monitor and maintain the RM2 using the Front Panel Push button, or connect a PC or a PDA via the serial

communications port. The RM2 contains custom designed software and a number of user programmable options to

congure the RM2 to exactly suit your needs in the eld on

demand. Operation and maintenance are simple without

compromising safety or reliability. Specically designed with

end user input, the RM2 shows you what you need to know quickly and easily. Each channel has its own clearly visible display with helpful prompts to guide you through setup and maintenance tasks. Bright LEDs visually indicate warnings and alerts for each input channel and the RM2 circuitry. The Event Logging feature securely stores in protected RAM up to 1000 events automatically listing the date, time, channel, detector type and the associated alarm, fault or calibration event. Highly useful information for developing maintenance schedules or performing troubleshooting and sequence of events analysis.

RM2 Millennium Controller

Product Data Sheet

BCR-0030-00-003

Specifications

Table 1 - RM2 Millennium Controller Ranges

Specifications Analog Relay Digital

Operating Voltage Range 10.5 to 32 Vdc

Power Consumption (at 24 V dc) Nominal 150 mA (1.8 W / 3.0 W ) de-energized / energized maximum 290 mA / 3.48 W

Power Consumption (at 12 V dc)) Nominal 80 mA / 130 mA (1.92 W / 3.12 W) de-energized / energized maximum 160 mA / 3.84 W

Temperature Range -40 °C to +80 °C (-40 °F to +176 °F)

Humidity Range 0 to 100 % RH, non-condensing

Chassis Material 16 gauge steel / powder coated

Weight 2.1 Kg / 4.5 lb (Stainless Steel option 3.4 Kg / 7.5 lb)

Outputs 4 to 20 mA - Into a maximum loop impedance of

Certifications/Approvals CSA - Class I, Division 2, Groups A, B, C and D - Temperature code T6 (Canada only)

Warranty 2 Year Warranty on Electronics

800 Ohms at 32 V dc or 150 Ohms at 10.5 V dc.

Isolated or non-isolated loop supply.

Form C contacts rated 5 Amps at 30 V dc / 250 V ac. Selectable energized / de-energized latching / non-latching, N.O. or N.C. Fault relay xed as

energized, non-latching.

ANSI-UL/ISA - Certied for ordinary location for Canada and US

RS-485 RTU Modbus protocol

Compatibility

The following Net Safety products are compatible with the RM2 Millennium Controller:

J Flame Detectors: IR3S-A, UV/IRS-A, UVS-A , UVS-H2-A, UV/IRS-H2-A J Gas Transmitters: Millennium II Series, Millennium Series, Toxic Series J Gas Sensors: ST Toxic Sensor Series

Figure 1 - Compatible Net Safety Products

ORDERING INFORMATION

RM2-ARD 2-channel rack mount w/ analog, relay and digital RS-

Labelling Options

-CC two combustible detectors

-CF one combustible, one ame detector

-CT one combustible, one toxic detector

-FF two ame detectors

-FT one ame, one toxic detector

-TT two toxic detectors

485 Modbus RTU protocol output

July 2012

Any Millennium II, Millennium, or

Toxic Series Transmitter/Sensor

with Analog Output

ST Sensor Series Any Net Safety

ST Sensor Series

Connect Any Two Devices

HEADQUARTERS Emerson Process Management

Flame and Gas Detection

Net Safety Monitoring Inc. 2721 Hopewell Place NE Calgary, Alberta, Canada T1Y 7J7 T + 1 (403) 219 0688 T 1 866 FIREGAS F +1 (403) 219 0694

www.net-safety.com

Any Net Safety

Flame Detector

with Analog Output

The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount Analytical and Net Safety Monitoring are marks of Emerson Process Management family of companies. All other marks are the property of their respective owners.

The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees,

express or implied, regarding the products or services described herein or their use or applicability.

All sales are governed by our terms and conditions, which are available on request. We reserve the

right to modify or improve the designs or specications of

our products at any time without notice.

RM2-COM-KIT - Communication Kit CAGE 2/4/8/12/16 - Rack Mount Cages

BFP - Blank Filler Plate

ACCESSORIES