8-in-1 IoT Device
Communications
Data Logging
Plug-and-Play
Simplicity drives our ideology
which lies in our ability to develop
sophisticated, yet intuitive solutions
to tackle difficult technological
problems... in other words, our ability
to democratize technology.
The thiamis 1000™ is a vital component of Netronix’s IoT (Internet-of-Things) platform. It combines
control, data logging, digital processing, global positioning and telemetry into one compact and
purpose-built device, making it the most advanced and cost effective solution in the IoT market. The
thiamis links the devices/sensors on the field with Netronix’s cloud network in a Plug-and-Play fashion,
while it ensures data integrity, processing and security on both ends.
“ The core of our inspiration
is simplicity”
- Dr. Vasileios Nasis/CEO
Product Specifications
Communications
Data Logging
(
)
Sensors
built-in
Cellular
WiFi
Bluetooth
Mesh
GPS
Antenna
SIM Card
Digital Ports
Delta Port
Wireless Ports
Clock
Protocols
Memory
Barometer
Accelerometer
GSM/GPRS/EDGE 850, 900, 1800, 1900 MHz
UMTS/HSPA 800/850, 900, AWS 1700, 1900, 2100 MHz
Bands B6, B19, and B5
802.11 b/g
Bluetooth 4.0
Zigbee
Sensitivity > -165dBm, 3m Accuracy, A-GPS
Built-in (GPRS, 3G, GPS, Zigbee, Bluetooth)
External MCX Female (GPRS/3G and GPS)
Built-in
RS-485, RS-232 (3-multiplexed), SDI-12, 2xUSB
Expansion port for Analog and Digital I/Os
Zigbee, Bluetooth and WiFi
Real-time
ASCII, ModBUS, SDI-12. UMB and more
8GB SD card (built-in)
50 kPa to 115 kPa
16g (13-bit resolution)
[Optional]
Temperature Sensor
General
Input Voltage
Power
Operating Temperature
Dimensions (LxWxD)
Weight
Certifications
3401 Grays Ferry Ave., Philadelphia, PA 19146 USA
+1 (215) 475-5133 | www.netronixgroup.com
@netronixgroup
-20 °C to 85 °C (10-bit resolution)
12 VDC
0.6 Watt
-30 °C to 75 °C ( -22 F to 167 F)
4.1in (105mm) x 1.4in (35mm) x 3.2in (82mm)
0.4 Lbs (0.18 kg)
CE, FCC, PTCRB
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Loading...