Netronix KB E60QH2 User Manual

E-Reader Device

Thank you for choosing this E Reader Device. Before using your e-reader,
carefully read this quick-start guide.

Box contents:
Before using your this Device for the first time, please check the content
of the package. If any of the following items is not in the package, contact
the retailer where you purchased the device.

 E Reader
 microUSB-USB cable
 Documentation

INSTRUCTIONS

To properly use the device, carefully read this quick-start guide before using
it. Instructions are based on factory settings of the device.
Images and screenshots in this guide may not exactly match those of the final
product.

Parts of the content may not exactly match the operation of the product owing
to firmware updates of the device.

This Device is not liable for any performance problems or incompatibilities
caused by the user’s editing of the registry.

Part of the content and services accessed through this device belong to third
parties and are protected by copyright, patent, registered trademark and/or
other intellectual property laws. This device does not guarantee the content
or the services provided.

Trademarks

Other Trademarks and their copyrights are property of their respective owners.

General views of the device

Buttons and ports

 Power Button

Long press the power button 3 seconds and wait for device power on. To
switch it off, Press and hold down the button and choose the “ √ ” option.

To activate the Sleep mode, please press the power button. And press it
again to resume reading.

 Reset hole

Reset the device.

 microSD card slot

Allows you to insert a microSD card and access the files stored on it.

 microUSB port

Allows you to connect your Device to a computer in order to transfer files.
You can also use the microUSB cable to charge your device.

 Home

Takes you back to the Home screen.

SET UP

When you turn on your e-reader, you have to select your language, connect
Wi-Fi and create an account to link your device (or use an already
existing account).

If you have registered before with other device, you can access by entering
your e-mail address and password.

If you have not registered before, you will need to create an account. You
will be asked to provide an e-mail address, password and bank-card details
(optional) for the Store.

If you have made purchases or downloaded items from the Store before, these
will appear directly in the Library.

Remember that the device must be connected to the Internet in order to link
it and create an account.