Verify your package contents.
Cayman 3341
Stand (optional)
CD-ROM
and Quickstart Guide
USB Cable
(Blue)
RJ-45
Ethernet Cable
(Yellow)
DSL Filters Two-way
Telephone Adapter
Your package may also include:
Making Broadband Work
™
3
Power Supply
1
4
Unpack the Cayman 3341
Cayman®3341
Quickstart Guide
RJ-11
Telephone Cable
(Lavendar)
2
Install DSL Filters
1. Install a DSL filter on every telephone (or another telephone device, such as a fax
machine or caller-id box) that shares your DSL line, as shown.
2. If the phone jack where you plan to plug in your Cayman 3341 is already
connected to a telephone or telephone device, use the two-way telephone
adapter to connect both the Cayman 3341 and your telephone or telephone
device to the same jack.
Telephone Wall Jack
Line-sharing
Filter
Phone
Telephone Wall Jack
Line-sharing
Filter
Phone
Two-way
Telephone Adapter
3341 Smart Modem
2
1
Set up the Cayman 3341
Telephone
Wall Jack
AC Power
Telephone
Cable
(lavender)
USB Cable
(Blue)
2
4
1
2
4
Power
Switch
3
1
1. Place the Cayman 3341 near your PC or another location that permits easy access
and visibility. You can lay the Cayman 3341 flat, or stand it upright using the stand
if supplied as an option.
Make sure any Ethernet cables are kept away from power cords, fluorescent
lighting fixtures, and other sources of electrical interference. Put the Cayman
3341 in a location where air can circulate freely around it.
2. Connect the Power Supply to the power jack labeled on the back panel of the
Cayman 3341. Plug the Power Supply into the nearest electrical outlet.
3. Turn on the power using the power switch.
The Power light should come on solid green.
4. Connect the lavender RJ-11 Telephone Cable from the DSL port labeled on the
Cayman 3341 to the phone jack that supports your DSL service.
The DSL Sync indicator light should blink for up to two minutes and then come
on solid green.
5. (PCs using Microsoft Windows only) Insert the CD-ROM into your PC’s CD-ROM
drive.
The Cayman Installation Wizard will assist configuring your PC to work with the
Cayman 3341. The Cayman Installation Wizard will launch automatically.
a. If both the Ethernet and USB ports are available on your PC, the Cayman
Installation Wizard will ask you to decide whether you want to use the
Ethernet Cable or the USB Cable to connect to the Cayman 3341. Alternatively,
you may use both ports on the Cayman 3341, provided that no more than two
users are connected at one time. Make your selection and proceed.
b. When the Cayman Installation Wizard prompts you, connect the cable as
shown in the following diagrams for the first computer:
USB Connection method (Windows-based PCs only)
Connect the Cayman 3341’s USB port labeled to the USB port on your PC
using the blue USB Cable. The USB Active light should come on solid green.
The Cayman Installation Wizard will automatically install USB drivers for your
USB connection and launch your Web browser.
Unless you are also using the Ethernet port, skip the Ethernet Connection
method step and go directly to the Configure the Cayman 3341 step on page 6.
3
Telephone
Wall Jack
AC Power
Telephone
Cable
(Lavender)
Ethernet
Cable
(Yellow)
1
2
3
Power
Switch
4
Configure the Cayman 3341
Copyright © 2002, Netopia, Inc. All rights reser ved. Netopia, Cayman and the Netopia logo are registered
trademarks and Making Broadband Work is a trademark of Netopia, Inc. All other trademarks are the
property of their respective owners.
6
6180028-00-02 V 06/02
1. The Cayman Installation Wizard will launch your Web browser application, such
as Netscape Navigator or Microsoft Internet Explorer, from your PC connected to
the Cayman 3341.
2. The Cayman 3341 then displays the Quickstart Web page.
(If for any reason the Wizard does not take you to the Quickstart web page,
type in http://192.168.1.254 into your location text box)
3. Enter the username and password supplied by your Internet Service Provider.
Click the Connect to the Internet button.
After you enter your username and password here the first time, you will not
have to enter them each time you access the Internet. The Cayman 3341 stores
this information and automatically connects you to the Internet.
The Cayman 3341 displays a message while it configures itself.
4. When the connection succeeds, your browser will display a success message.
Once a connection is established, your browser is redirected to Netopia’s product
registration web page.
5. Congratulations! Your installation is complete. You can now go to any Web site
by typing the address “URL” in your browser’s location box and hitting the Enter
key on the keyboard of your PC or by selecting from your bookmarks with the
addresses of your favorite Web sites.
Ethernet Connection method
Connect the Cayman 3341’s Ethernet port labeled to the Ethernet port on
your PC using the yellow Ethernet Cable. The Ethernet Link light should come
on solid green.
• If the Cayman Installation Wizard detects the required network settings in
your PC, it will automatically launch your Web browser and you can proceed
directly to Configure the Cayman 3341 on page 6.
• If your PC needs to have its network settings changed,
Perform the following:
Windows 95, 98 and ME
On your PC, go to:
Open the network window by
double-clicking the Network Icon
In the list of network components,
highlight the entry that says
“TCP/IP (your Ethernet card here)”
Click
In the window
Select and click
In the window, click and restart your computer.
Go to Configure the Cayman 3341 on page 6.
Windows 2000 and XP
• Right click on the My Network Places icon on your Windows desktop and
select Properties from the drop-down menu.
• Select your Local Area Connection.
• Right click on your Local Area Connection and select Properties.
• Select Internet Protocol [TCP/IP].
• Click the Properties button.
• Click the Obtain IP address automatically radio button and the Obtain DNS
server address automatically radio button. Click the OK button.
• Restart your PC when prompted.
• Go to Configure the Cayman 3341 on page 6.
Macintosh
Your Macintosh must be using MacOS 7.6.1 or higher.
• Select Control Panels from the Apple menu.
• Open the TCP/IP Control Panel.
• Choose Connect via Ethernet.
• Choose Configure Using DHCP Server. Close and Save.
• Launch your preferred internet browser and enter “Cayman” as the desired
network location.
• Go to step 2 of Configure the Cayman 3341 on page 6.
Mac OS X users
• Launch System Preferences from the Dock or from the Apple Menu.
• Select the Network Preference Pane.
• Choose Show: Built-in Ethernet.
• Click the TCP/IP tab.
• Choose Configure: Using DHCP.
• Quit System Preferences. You do not have to restart the Macintosh.
• Launch your preferred internet browser and enter “Cayman” as the desired
network location.
• Go to step 2 of Configure the Cayman 3341 on page 6.
Set up the Cayman 3341 (continued)
5
Loading...