NETOP Q BOOM54069 User Manual

™

Model : # 54077

Q-BOOM

Instructions & Tips

Congratulations on your purchase of Q-Boom, the remote-controlled

balloon popper from Pioneer

Please read this booklet to achieve the best results

when using this device.

®

Balloon Company!

!

USA ©2018 PBC SB-PBC 1612035

Q-Boom™ consists of two basic components: Q-Boom Battery Replacement*

1. ONE BUTTON REMOTE

2. RECEIVER

Red Button

Antenna

Action Button

Display

Mode Switch

Antenna

The ONE BUTTON REMOTE requires an alkaline CR2 battery.

Use the Allen wrench to remove the three ONE BUTTON REMOTE screws,
then remove the cover. Insert the CR2 battery into the battery holder and
reattach cover.

The RECEIVER requires a 9V alkaline battery. Use the Allen wrench to
remove the four retainer screws from the bottom of the unit and expose
the circuit board by removing the back cover. DO NOT TOUCH CIRCUIT

BOARD. Gently push the battery into the terminals and refasten cover.

Lights

Hanger

Z-Notch

On/Off

Switch

*NOTE: Remove the batteries from the RECEIVER and ONE BUTTON
REMOTE after using Q-Boom to maximize battery life. Keep new
batteries on hand when using Q-Boom.

*NOTE: Remember to turn the Q-Boom RECEIVER OFF after each use.

2 3