NetMedia NM-POCDOME Specifications

NM-POCDOME

Black

Power over Coax Camera

Indoor Dome

B/W Color

This general purpose surveillance camera utilizes a built-in NetMedia Power over Coax (PoC) Video Encoder and external PoC
Video Decoder to exchange power and video across a single coax cable, such as RG6. There is no need to run multiple cables to
the camera location! It mounts to walls or ceilings and is viewed with a security monitor or television. To view the camera on a
single standard television, use the TV’s composite RCA Video Input jack.

Product Includes:

1. Camera Assembly (Camera Base, Camera Dome, Camera Bracket, Camera Lens,
PoC Video Encoder, F-Connector).

NetMedia PoC Video Decoder and 24V DC 200mA Power Transformer.

2.

3. Mounting Screws and RCA Video Cable.

Camera Assembly

Available in Black:

B/W camera Color camera Day/Night Color Housing

NM-POCDOME-BB

Camera Dome

Rotate to match camera field of
view. Twist and remove to access
Camera Bracket.

F-Connector

Transmits both power and video
across a single coax.

NM-POCDOME-CB

NM-POCDOME-HB

Day/Night

Color

Camera Base

Install on walls or ceilings.

Camera Bracket

Adjust for desired field of view.

Black

PoC Video Encoder

Built into camera - exchanges

power and video with Decoder for

One Wire Video™ on coax cable.

Camera Lens

Factory set - rotate in either

direction to adjust focus.

NM-POCDOME

F-Connector

Connects to camera
F-Connector with a single
coax such as RG6.

Power Input

Connects to 24V DC wall
transformer (included)
and AC outlet.

FEATURES

PoC Video Encoder built into camera

Includes PoC Video Decoder module

One Wire Video™ Installation

Uses one cable cable to camera

Excellent image quality

Compact and lightweight

Internally routed cables

Mounts directly to walls and ceilings

Works in low light conditions

Adjustable camera angles

Tamper resistant wiring

Includes power supply

1 year limited warranty

PoC Video Decoder (Included)

SPECIFICATIONS

Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:
Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
PoC Decoder Video Output:
PoC Decoder Video Output Connector:
PoC Decoder Power Input:
PoC Decoder Power Connector:
PoC Decoder Size:
PoC Decoder Weight:
Assembly Size:
Mounting Holes:
Assembly Weight:

RCA Video Out

Connects to viewing
device such as monitor,
DVR, TV, or modulator.

B/W Color Day/Night Color

3.6mm
1/3” CCD
350 lines

72˚ Horizontal

0.7 Lux F2.0
Yes

Coax: RG6 quad shield recommended

5.5mm OD, 2.1mm ID, center positive

3.2” long, 2.2” wide, 0.9” thick

3.7mm
1/4” CCD
470 lines

54˚ Horizontal

0.5 Lux F1.2
No

Female F-Connector

Up to 100’

Proprietary

Composite

Female RCA

24V DC, 200mA

3 oz.

3.5” dia. x 3.25” high

2.25” centers

6.5 oz.

(subject to change without notice)

72˚ Horizontal

0.3 Lux F1.2

3.6mm
1/3” CCD
470 lines

Yes

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 [phone] Fax: [phone] Email: [e-mail] www.netmedia.com

MAN-POCDOME REV0703A

NM-POCDOME

DO NOT CUT OR SPLICE THE CAMERA’S CABLES. MODIFYING THE UNIT IN ANY WAY WILL VOID THE WARRANTY.

Installation Procedures:

1. Connect a coax cable (RG6 recommended) to the F-Connectors of the camera and Video Decoder. Each
Camera/Decoder pair needs a dedicated point-to-point wiring circuit. Do not connect the Camera/Decoder coax to

video distribution equipment! Doing so could damage this product and/or the other attached devices!

2. Connect a video cable from the viewing device (monitor, Quad, DVR, modulator, etc.) to the Decoder’s RCA Video Out
jack. Simple adapters, such as RCA to BNC, may be used where appropriate.

3. Connect the 24V DC 200mA Power Transformer from an AC outlet to the Decoder’s Power Input Connector.

4. Remove Camera Dome and mount the Camera Base to ceiling. Adjust the Camera Bracket for proper viewing. Replace
the Camera Dome and rotate opening to match camera view.

Up to 100 Feet

Video CableCoax Cable

Camera

PoC Video Decoder Module

Monitor

Television

Figure 1 - Connecting the camera to a security monitor or standard television. Use the TV’s composite RCA Video In

jack and view through its video or line input. The picture will not be available on a channel.

Quad.

Sequencer

or

DVR

Coax Cable

Camera

PoC Video Decoder Module

Monitor

or

Television

Figure 2 - Connecting the camera to multiple pieces of video equipment. Every piece except the last must have a

loopback or video output jack.

NM-POCDOME

or

To Next

Device

Camera

Main cable or

antenna

Coax Cable

PoC Video Decoder Module

Modulator

AMP

Amplifier

Splitter/

Combiner

Distribution

Panel

or Splitter

Figure 3 - Connecting the camera to a modulator for whole house distribution and standard television viewing on

the modulated channel. The modulator can also be the last piece of equipment in Figure 2.

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 [phone] Fax: [phone] Email: [e-mail] www.netmedia.com

MAN-POCDOME REV0703A

Television

Television