NetMedia NM-POCBALL Specifications

NM-POCBALL

Power over Coax Camera

Indoor Ball Camera

B/W Color

This general purpose surveillance camera utilizes a built-on NetMedia Power over Coax (PoC) Video Encoder and external
PoC Video Decoder to exchange power and video across a single coax cable, such as RG6. There is no need to run multiple
cables to the camera location! It mounts to a typical rectangular junction box and is viewed with a security monitor or
television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.

Product Includes:

1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base Plate, PoC Video Encoder, F-Connector).

NetMedia PoC Video Decoder and 24V DC 200mA Power Transformer.

2.

3. Mounting Screws and RCA Video Cable.

PoC Video Encoder

Not shown - Built onto unit, it
exchanges power and video with
Decoder for One Wire Video™ on coax.

Locking Ring

Secures elbow bracket to
Base Plate at desired position.

Base Plate

Supports PoC Encoder and cable.
Mount to rectangular junction box.

F-Connector

Connects to camera
F-Connector with a single
coax such as RG6.

Day/Night

Color

PoC Video Decoder (Included)

B/W camera Color camera Day/Night Color Housing

NM-POCBALL-BW

Available in UV Paintable White

NM-POCBALL-CW

Camera Assembly

NM-POCBALL-HW

Elbow Bracket

Adjusts camera angle at Wall

Plate, screw, and Housing.

Housing Cap

Remove to adjust focus.

Camera Lens

Factory set - rotates in either

direction to adjust focus.

Transmits both power and
video across a single coax.

White

F-Connector

NM-POCBALL

Power Input

Connects to 24V DC wall
transformer (included)
and AC outlet.

FEATURES

PoC Video Encoder built into camera

Includes PoC Video Decoder module

One Wire Video™ Installation

Uses one coax cable to camera

Excellent image quality

Tough billet aluminum housing

Internally routed cables

Mounts to standard electrical fixtures

Works in low light conditions

Adjustable camera angles

Tamper resistant wiring

Includes power supply

1 year limited warranty

SPECIFICATIONS

Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:
Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
PoC Decoder Video Output:
PoC Decoder Video Output Connector:
PoC Decoder Power Input:
PoC Decoder Power Connector:
PoC Decoder Size:
PoC Decoder Weight:
Housing Size:
Base Size:
Mounting Holes:
Assembly Weight:

RCA Video Out

Connects to viewing
device such as monitor,
DVR, TV, or modulator.

B/W Color Day/Night Color

3.6mm
1/3” CCD
350 lines

72˚ Horizontal

0.7 Lux F2.0
Yes

Coax: RG6 quad shield recommended

5.5mm OD, 2.1mm ID, center positive

3.2” long, 2.2” wide, 0.9” thick

3.7mm
1/4” CCD
470 lines

54˚ Horizontal

0.5 Lux F1.2
No

Female F-Connector

Up to 100’

Proprietary

Composite

Female RCA

24V DC, 200mA

3 oz.

2.33” dia.

4.5“ long x 2.75” wide

3.25” centers
1 lb.

(subject to change without notice)

72˚ Horizontal

0.3 Lux F1.2

3.6mm
1/3” CCD
470 lines

Yes

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 [phone] Fax: [phone] Email: [e-mail] www.netmedia.com

MAN-POCBALL REV0703A

NM-POCBALL

DO NOT CUT OR SPLICE THE CAMERA’S CABLES. MODIFYING THE UNIT IN ANY WAY WILL VOID THE WARRANTY.

Installation Procedures:

1. Connect a coax cable (RG6 recommended) to the F-connectors of the camera and Video Decoder. Each
Camera/Decoder pair needs a dedicated point-to-point wiring circuit. Do not connect the Camera/Decoder coax to

video distribution equipment! Doing so could damage this product and/or the other attached devices!

2. Connect a video cable from the viewing device (monitor, Quad, DVR, modulator, etc.) to the Decoder’s RCA Video
Out Connector. Simple adapters, such as RCA to BNC, may be used where appropriate.

3. Connect the 24V DC 200mA Power Transformer from an AC outlet to the Decoder’s Power Input Connector.

4. Mount the Base to the junction box (not included) and adjust the camera assembly for proper viewing. When
satisfied, secure all adjustment points.

Up to 100 Feet

Video CableCoax Cable

Camera

Figure 1 - Connecting the camera to a security monitor or standard television. Use the TV’s composite RCA Video In

jack and view through its video or line input. The picture will not be available on a channel.

PoC Video Decoder Module

Monitor

or

Television

NM-POCBALL

Quad.

Sequencer

or

DVR

Coax Cable

Camera

PoC Video Decoder Module

Monitor

or

Television

Figure 2 - Connecting the camera to multiple pieces of video equipment. Every piece except the last must have a

loopback or video output jack.

Camera

Main cable or

antenna

Coax Cable

PoC Video Decoder Module

Modulator

AMP

Amplifier

Splitter/

Combiner

Distribution

Panel

or Splitter

Television

Television

Figure 3 - Connecting the camera to a modulator for whole house distribution and standard television viewing on

the modulated channel. The modulator can also be the last piece of equipment in Figure 2.

To Next

Device

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 [phone] Fax: [phone] Email: [e-mail] www.netmedia.com

MAN-POCBALL REV0703A