NetMedia iViewHD-D1 Quick Manual

IP Security Camera

iViewHD-D1

The NetMedia® iViewHD™ Extended D1 Resolution Internet Protocol (IP) camera connects to a Power
over Ethernet (PoE) network switch, such as the NetMedia POEmax, for distribution across a local com­puter network or The Internet. It provides live viewing of its Motion JPEG (MJPEG) images through
various web browsers such as Microsoft Internet Explorer, Apple Safari, Mozilla Firefox, and Google
Chrome. Live viewing plus recording and playback are also available through Network Video Recorders
(NVRs) that support MJPEG video streams and manual/custom/generic camera command strings.

720x536 Extended D1 Resolution

Product Includes:

1. iViewHD Camera Housing (Camera
Lens, Ethernet Jack, Reset Button,
Speaker, Power LED).

2. Mounting Hardware (Slide Mount,
Base, Screws, Anchors).

Speaker

(Inside) Beeps when powered on.

Red LED

Indicates Power.

Slide Mount

Slide Rail and Slide Nut attach
and adjust camera on base.

Swivel Screw

Adjusts camera angle.

Mounting Anchors

Secure screws in walls.

Mounting Screws

Fasten Camera Base to surface.

Please visit iViewHD.com
for full User Manual and
camera firmware updates.

Camera Lens

F3.2, 59.9° diagonal angle

Reset Button

Press during power

up to reset camera.

MAC Address

Unique Ethernet ID.

Yellow LED

Indicates network

PoE power.

Ethernet Jack

RJ-45 for video and power

via PoE network switch.

Green LED

Indicates network data link.

Camera Base

Mounts camera to surface.

FEATURES SPECIFICATIONS

High resolution Extended D1 720x536 image
Variable resolution 720x536 to 160x120
Power over Ethernet (PoE) operation
IEEE 802.3af compliant
Requires no power supply
Electronic exposure and white balance
Up to 4 IP addresses - DHCP, Link Local, 2 Static
Rugged aluminum housing
FCC Class B and CE certication
One year limited warranty

© 2009 NetMedia Inc. All rights reserved. NetMedia and iViewHD are either registered trademarks or trademarks of NetMedia, Inc. Any other trademarks or trade names mentioned are the property of their respective owners.

NetMedia Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 [phone] Fax: [phone] Email: [e-mail] www.netmedia.com

Camera Lens:
Image Sensor:
Output Connector:
Supported Formats:
Supported Resolutions:
Power Requirement:
Housing Size:
Housing Weight:
Base Size:
Base Weight:

F3.2, 59.9° diagonal

1/4” CMOS

TCP/IP Power over Ethernet RJ-45

Motion JPEG (MJPEG), Still JPEG

720x536, 640x480, 400x298, 320x240, 160x120

Power over Ethernet (PoE) 2.5 Watts

2.9“ long x 1.1” wide x 2.75“ high
4 oz.

2.7”wide x 2.7” high
3 oz.

(subject to change without notice)

MAN-iViewHD-D1 REV0912A

iViewHD-D1

iViewHD-D1

iViewHD IP Camera

Quick Setup Procedures:

1. Mount base to desired surface using included hardware. Remove packing material from camera Slide Rail and
attach Slide Nut to base Swivel Screw. Readjust camera angles once image is available through browser.

2. Connect Ethernet Jack to Power over Ethernet (PoE) network switch or injector that also connects to computer network.

3. To find the camera on your network, open the Standalone Bonjour Browser available from iViewHD.com
downloads or open a computer browser that supports Bonjour (mDNS) such as Apple Safari.

4. View image or change camera settings such as resolution and compression if desired. Press Save Parameters
button to make new settings the default.

5. Connect to an NVR for recording and playback as directed by its product manufacturer using iViewHD’s IP
address, iViewHD’s port (default 80), and iViewHD’s minimum get image command string:

http://IP-Address/image.cgi?CAPTURE=YES&STREAM=1&COMMAND=

6. See the User Manual for complete instructions and additional methods of locating the camera.

iViewHD IP Camera

Router/DHCP Server

PoE Power Source

Figure 1 - Connect iViewHD to PoE power source such as NetMedia POEmax switch for power and computer connectivity.

Select “Web Server (HTTP)”
from Bonjour Services.

Figure 2 - Running the Standalone Bonjour Browser to find your iViewHD camera and display it with a web browser.

Help and
Information Area

Camera
Parameter Controls

Computer w/ Web Browser

Double-click iViewHD

camera to launch it in your

default web browser.

Navigation Bar

Camera Image

Frame Rate

Information

Save and Restore
Parameters buttons

Figure 3 - iViewHD Image page for viewing camera output and adjusting, saving, and restoring camera settings.

NetMedia Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 [phone] Fax: [phone] Email: [e-mail] www.netmedia.com

Footer link to

iViewHD.com

iViewHD-D1

MAN-iViewHD-D1 REV0912A