NetMedia iSwitchHD-CE User Manual

4x1 HDMI Switch

NM-iSwitchHD-CE

The NetMedia® iSwitchHD™ Consumer Edition is an intelligent auto-sensing four-port High Definition
Multimedia Interface (HDMI®) switch. It automatically senses and connects whichever component was
last powered up to provide spontaneous access to multiple HDMI devices such as Satellites, Blu-rays,
video game consoles, or computers. It is perfect for home theaters, boardrooms, schools, and churches.
Cascade additional 4x1 switches to make even larger intelligent arrays (7x1, 10x1, 16x1, etc.).

Product Includes:

1. iSwitchHD-CE Switch Assembly (1-HDMI Output, 4-HDMI Inputs,
Power Input, Power LED, 4-Input LED’s, Select Button).

2. 5V DC 1A Power Transformer (Center Conductor Positive).

Power Input

5V DC 1A

Hands-Free Intelligent Auto-Sensing

HDMI OUT

Connects to HDMI

compatible display

device.

HDMI Inputs 1-4

Connect to HDMI
compatible sources.

Power LED

Indicates Power

Input LED’s 1-4

ON indicates available input,
PULSING indicates selected input.

FEATURES SPECIFICATIONS

HDMI 4-input 1-output switch

Auto-senses and connects when source turns on

DVI/HDMI computer resolution up to 1920x1200

480i, 480p, 720p,1080i, 1080p, & Deep Color

Manual override source-select button

Cascade multiple units for 7x1, 10x1, 16x1, etc.

Output Signal/Connector:
Input Signal/Connectors:
Supported Formats:
Power Requirement:
Power Connector:
Size:
Weight:

Select Button

Manually selects

HDMI input source.

1 - HDMI Connector

4 - HDMI Connectors

480i, 480p, 720p,1080i, 1080p, Deep Color

5V DC 1A

4.0mm OD, 1.7mm ID, center positive

3.9“ long x 5.5” wide x 0.9“ high

8.0 oz.

(subject to change without notice)

NM-iSwitchHD-CE

One year limited warranty

© 2010 NetMedia Inc. All rights reser ved. NetMedia, iSwitchHD, and iSwitchHD-4x1 are either registered trademarks or trademarks of NetMedia, Inc. HDMI is a trademark or registered trademark of HDMI
Licensing LLC in the United States and other countries. Any other trademarks or trade names mentioned are the property of their respective owners.

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 [phone] Fax: [phone] Email: [e-mail] www.netmedia.com

MAN-iSwitchHD-CE REV1009A

NM-iSwitchHD-CE

Setup Procedures:

1. Connect the 5V DC 1A power transformer to the iSwitchHD Power Input connector. Connect
the other end of the power transformer to an AC outlet.

2. Use an HDMI cable to connect the output of each source to one of the four iSwitchHD Inputs.
Use another HDMI cable to connect the iSwitchHD Output to the display device (Figure 1).

3. Start the display device. Start one or more source devices (the corresponding Input LED will
be ON). The last source started will automatically be connected to the display (the corre­sponding Input LED will PULSE). If desired, press the Select Button to manually change to a
different source. Note: it may take minutes for some devices to start and a few seconds for the
iSwitchHD and the display device to properly detect the HDMI signal.

HDTV

Video Game
Console

Satellite Receiver

Power

Figure 1 - Connecting the iSwitchHD-CE to power, a display, and various sources such as a Satellite Receiver, Blu-ray,

video game console, and computer.

Blu-ray Player

Laptop Computer

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 [phone] Fax: [phone] Email: [e-mail] www.netmedia.com

MAN-iSwitchHD-CE REV1009A

NM-iSwitchHD-CE