NETIS SYSTEMS WF2503R User Manual

WF2503

netis 150Mbps Wireless-N Long-distance

USB Adapter

Quick Installation Guide

V1.2

2011-03-04

Wireless-N USB Adapter Quick Installation Guide

Check Your Package Contents

The following items should be found in your package:

 Wireless-N USB Adapter
 Quick Installation Guide
 CD-ROM

Make sure that the package contains above items. If any of the above items is missing or damaged,
please contact the store you bought this product from.

Before You Begin

Minimum Requirements:

 Available USB 1.1 or USB 2.0 port
 300 MHz processor and 32 MB of memory
 CD-ROM drive
 An 802.11b/g/n access point (for Infrastructure Mode) or another 802.11b/g/n wireless

adapter (for Ad-Hoc; Peer-to-Peer networking mode.)

 Microsoft® Windows® 7, V i sta™, XP, 2000 SP4

Insert the CD

Turn on the computer and insert the included CD in the CD-ROM drive. The install screen will
appear，as figure 1. If not, click the Start button and choose Run and enter D:\install.exe (if ‘D’ is
your CD-ROM drive)

Click “Install Driver,” choose your product model, click “Install” and follow the software
instructions. The following is the step-by-step instructions in Windows XP. The steps and
screens are similar for the other Windows operating systems.

2

Wireless-N USB Adapter Quick Installation Guide

Figure 1

 Step 1 Select language and then click “Next ”,if no such option, go to Step 2

 Step 2 Click “Next”

Figure 2

3