NETIS SYSTEMS 320GP2006M1 Users Manual

Wireless network adapter User manual

Wireless Network Adapter

User’s Manual

Page 1 of 27

Wireless network adapter User manual

Table of Contents

Contents of Package:...............................................................................3

Before you begin .....................................................................................4

Chapter 1 Introduction........................................... .................................4

1.1 Welcome...................................................................................................................................4

1.2 About This Guide......................................................................................................................5

1.3 Copyright statement..................................................................................................................5

Chapter 2 Hardware Description ........................................... ..................5

2.1 Cardbus adapter.........................................................................................................................6

2.2 PCI adapter................................................................................................................................6

Chapter 3 Hardware Installation .............................................................7

3.1 Before you begin.......................................................................................................................7

3.2 Cardbus Adapter: ......................................................................................................................7

3.3 PCI Adapter: .............................................................................................................................7

Chapter 4 Install Driver.................... .... ...................................................8

4.1 Windows 98SE, Me and 2000...................................................................................................8

4.2 Windows XP...........................................................................................................................11

Chapter 5 Install Driver Install Utility .................... ...............................13

Chapter 5 Configuration your wirel e ss adapter .....................................15

Chapter 6 Using the Wireless Client Configuration Utility......................17

6.1 Network Status........................................................................................................................17

6.2 Site Survey..............................................................................................................................18

6.3 Admin.................................................................................. ....................................................19

6.4 Profile Manager.......................................................................................................................21

Chapter 7 Troubleshooting ....................................................................25

APPENDIX A Specifications..................................... .... .... .... ... .... .... ... .... .26

Page 2 of 27

Wireless network adapter User manual

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, us es an d can radiate radio frequency en ergy an d, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

---Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment. This device and its antenna must
not be co-located or operating in conjunction with any other antenna or transmitter.

Contents of Package:

z Wireless network Cardbus/PCI adapter
z Manual, Drivers and Utility on CD
z Quick Installation Guide

If any of the above items are missing, please contact y our reseller.

Page 3 of 27

Wireless network adapter User manual

Before you begin

You must have at least the following:

z A laptop computer/desktop PC with an available 32-bit Cardbus/PCI slot
z At least a 300MHz processor and 32MB of memory
z Windows 98SE, ME, 2000, XP
z A CD-ROM Drive
z Cardbus/PCI controller properly installed and working in the laptop computer
z An 802.11g or 802.11b Access Point (for infrastructure Mode) or another 802.11g or

802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)

Chapter 1 Introduction

1.1 Welcome

The Wireless Network Adapter is a powerful 32-bit Cardbus/PCI Adapter that
installs quickly and easily into PCs. The Adapter can be used in Ad-Hoc mode to
connect directly with other cards for peer-to-peer file sharing or in Infrastructure
mode to connect with a wireless access point or router for access to the Internet
in your office or home network.
The Wireless Cardbus/PCI Adapter connects you with 802.11g networks at up to
an incredible 54Mbps! And for added versatility, it can also interoperate with all
the up to 11Mbps 802.11b products found in homes, businesses, and public
wireless hotspots around the country. And in either mode, your wireless
communications are protected by industrial-strength WPA, so your data stays
secure.

Page 4 of 27

Wireless network adapter User manual

1.2 About This Guide

This User Manual contains information on how to install and configure your Wireless
Broadband Router to get your network started accessing the Internet. It will guide you
through the correct configuration steps to get your device up and running.

Note and Caution in this manual are highlighted with graphics as below to indicate
important information.

Contains related information that corresponds to a topic.

Note

Represents essential steps, actions, or messages that should not be ignored.

Caution

1.3 Copyright statement

No part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, whether electronic, mechanical, photocopying, recording, or
otherwise without the prior writing of the publisher.

Chapter 2 Hardware Description

The wireless Cardbus/PCI Adapter supports up to 54 Mbps connections. This card is fully compliant
with the specificati ons def ined in IEE E802.11g standard. It is designed to complement PCI Local Bus
computers and supports Windows 98SE/Me/2000/XP.

2.1 Cardbus adapter

Page 5 of 27

Wireless network adapter User manual

Figure 1-1

LEDs

The two status LED indicators of the Car dbus wireless adapter are described in the following
figure and table.

LED Status Description

PWR ON (Green) Indicates the Adapter is ready

ON (Green) Indicates a valid connection Lnk/Act
Flashing Indicates the the Adapter is transmitting

or receiving data.

2.2 PCI adapter

Figure 1-2
LEDs
The Wireless PCI Adapter includes a status LED indicators, as described in the fol lowing table.

LED Status Description

ON (Green) Indicates a valid connection Lnk/Act
Flashing Indicates the Adapter is trans mitting or

receiving data.

Chapter 3 Hardware Installation

3.1 Before you begin

You must have at least the following:

9 A laptop computer/desktop PC with an available 32-bit Cardbus/PCI slot

Page 6 of 27

Wireless network adapter User manual

9 At least a 300MHz processor and 32MB of memory
9 Cardbus/PCI controller properly installed and working in the computer
9 A CD-ROM Drive
9 An 802.11g or 802.11b Access Point (for infrastructure Mode) or another

802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking
mode.)

3.2 Cardbus Adapter:

 Power on your notebook, let the operating system boot up completely, and log in

as needed.

 Hold the dapter with the LOGO facing up and insert it into a Cardbus slot. After a

short delay, the Found New Hardware Wizard displays.

Figure 1-1

3.3 PCI Adapter:

 Turn off your desktop PC.
 Open your PC case and locate an available PCI on the motherboard.
 Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching

the slot’s contacts. You may have to apply a bit of pressure to slide the adapter
all the way in. after the adapter is firmly in place, secure its fastening tab to your
PC’s chassis with a mounting screw. Then close your PC.

 Attach the external antenna to the adapter’s antenna port.
 Power on your desktop PC.

Page 7 of 27

Wireless network adapter User manual

Figure 1-2

You have now completed the hardware installation for the Adapter.

Chapter 4 Install Driver

4.1 Windows 98SE, Me and 2000

Please follow the steps below to install driver:

1. Windows will automatically detect the Adapter. The screen in Figure 2-1 should appear.
Then click the Next button.

Figure 2-1

2. Click the radio button Search for suitable driver for my device(recommended). Then
click the Next button.

Page 8 of 27

Wireless network adapter User manual

Figure 2-2-

3. Insert the Driver and Utility CD-ROM into the CD-ROM drive.

4. Choose the CD-ROM drives, Then click the Next button.

Figure 2-3

5. Windows find the adapter drivers, then click the Next button.

Page 9 of 27