Netgear orporated 16400356 User Manual
Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to
register your product, get help, access the latest downloads and user manuals, and join our
community. We recommend that you use only ocial NETGEAR support resources.
Trademarks
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non‑NETGEAR trademarks are used for reference purposes only.
Package Contents
The box contains the following items.
Quick Start
Compliance
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
Nighthawk
AC1900 WiFi VDSL/ADSL Modem Router
Model D7000
Modem router
Power adapter
(varies by region)
DSL microfilter
(varies by region)
Antennas (3)
Ethernet cable
In some regions, a resource CD is included in the package.
Phone cable
November 2015
You can use this diagram to connect your modem router or follow the detailed instructions in this booklet.
1. Attach the antennas.
Attach the antennas on the threaded antenna
posts.
Position the antennas as shown.
2. Connect the modem router to a DSL
service (ADSL or VDSL).
Install the DSL microfilter between the phone
line and the phone. Use the phone cable to
connect the DSL microfilter to the DSL port on
the modem router.
3. Power on the modem router.
Wait for the Power LED
to light white.
If the Power LED does not light, press the
Power On/Off button.
Wait for the WiFi LED
to light white.
4. Check the DSL LED.
If the modem router is connected to a DSL
service, the DSL LED
lights white.
Modem
router
Ethernet cable
Phone cable
Computer
6. Connect to the Internet.
Launch a web browser. The NETGEAR
installation assistant displays.
If you do not see the NETGEAR
installation assistant,
enter www.routerlogin.net in the
address field of the web browser. If a
login window displays, enter admin for
the user name and password for the
password.
The NETGEAR installation assistant
determines your Internet connection. If
the modem router successfully connects
to the Internet, the Internet LED
lights white.
7. Get the genie app.
Download the free genie app from
www.NETGEAR.com/genie.
Easily share media, files, and printers
on the network from your smartphone,
tablet, or laptop.
5. Connect a device.
You can use an Ethernet cable or connect with
WiFi.
To connect with WiFi, use the pre‑assigned
WiFi network name and password on the label
on the modem router.
Power
adapter
DSL
microfilter
ADSL or VDSL
Internet
8. Get the user manual.
You can get the user manual online at
http://downloadcenter.netgear.com
or through a link in the product’s user
interface.
LEDs
The LEDs on the top of the modem router light to indicate
modem router activity:
Power
Internet
DSL
2.4 GHz WiFi
5 GHz WiFi
USB 3.0 port 1
USB 3.0 port 2
Ethernet ports 1–4
WiFi On/Off button with LED
WPS button with LED
Rear Panel
The connections and buttons on the rear panel of the
modem router are shown in the following figure:
USB 3.0
port 2
LED O/On
switch
Reset
button
Power
On/O
button
Power
connector
Ethernet ports 1–4
Internet port
1
USB 3.0
port 1
DSL port
Additional Information for DSL Service
Make sure that your DSL service (ADSL or VDSL) is active before
you install the modem router. You need the following information to
install your modem router and connect to the Internet:
• DSL user name and password. This information is included
in the welcome letter your DSL Internet service provider (ISP)
sent you when you signed up for your service.
• Your telephone number or DSL account number. If you do
not use voice service, you can use your DSL account number
instead.
If you do not know or cannot locate your DSL user name and
password, call your DSL ISP.
Note: If your provider says that they do not support NETGEAR
services, tell them that you need only your DSL user name and
password; you do not need support.
2
Install Your Modem Router
Make sure that your Internet service is active before you install
your modem router.
¾ To install your modem router:
1. Attach the antennas.
a. Align the antennas with the antenna posts on the
modem router.
b. Attach the antennas on the threaded antenna posts.
c. Position the antennas as shown.
We recommend that the center antenna be vertical and
that you aim the others outward at 45‑degree angles as
shown.
3
2. Connect the modem router to a DSL service (ADSL or VDSL).
ADSL or VDSL
Internet
Modem router
Phone cable
DSL
microfilter
a. Install the DSL microfilter between your phone line and a
phone.
b. Use the phone cable to connect the microfilter to the DSL
port on the modem router.
4
3. Add power to the modem router:
Modem router
Power
adapter
a. Connect the power adapter to the modem router and plug
the power adapter into an outlet.
b. Wait for the Power LED
to light white.
If the Power LED does not light, press the Power On/Off
button.
c. Wait for the WiFi LED
to light white.
If the WiFi LED does not light, press the WiFi On/Off
button.
4. Check the DSL LED.
If the modem router is connected to a DSL service, the DSL
LED
lights white.
5
Loading...