Netgear orporated 16100338 User Manual

Quick Start Guide

1

Welcome

Thank you for choosing Arlo.
Getting started is easy.

2

3

What’s Included

Arlo Q camera

Wall-mount

TOP

plate

USB cable

USB power

adapter

4 Mounting

screws

Plug In Your Camera

1

Connect one end of the USB cable to the port on the camera.

Plug the other end of the USB cable into the adapter.

Plug the USB adapter into a wall socket and wait for the
camera LED to blink amber.

4

5

Get the App

2

For the best experience, download the Arlo app for your
smartphone by scanning the QR code below or searching for
“Arlo” in the app store.

https://arlo.netgear.com

Get a New Account

3

Already have an account? See Add Devices to an Existing

Account on page 8.

Launch the app from
your smartphone and
tap the New System
Setup button. Follow the
onscreen instructions.

Or from a computer, visit

https://arlo.netgear.com/#/login

and click the New System Setup
button. Select Arlo Q.

6

7

Add Devices to an Existing Account

Connect Your Camera

4

Launch the Arlo app and log in to your account.

Tap the Add Device button, select Arlo Q, and follow the onscreen
instructions.

8

Follow the onscreen instructions from either the Arlo app or from
a computer to connect your camera directly to your WiFi router.

Note: If you own an Arlo wire-free system, do not connect your

Arlo Q camera to the Arlo base station.

9

5

Place or Mount Your Camera

You can place your camera on a shelf or other flat surface, or
you can mount it on the wall.

Note: The camera base includes a magnet that can help position a

camera on a metal surface.

10

If you are mounting the camera on a wall, place the wall plate
and secure it in place with four screws.

Slide the camera into the wall plate.

11

You’re Done!

Camera LED Guide

Congratulations! Your Arlo camera is set up and ready to go.

To view useful tutorial videos, find troubleshooting tips, or get support,
visit http://support.arlo.com.

12

Solid amber

The camera is
booting up.

Slow blinking
amber

The camera is
powered on and is
ready for setup.

Fast blinking
amber

The camera is not
connected to a
WiFi network yet.

Solid blue

The camera is
powered on and is
connected to Arlo
servers.

Slow blinking
blue

The camera is
connecting to a
WiFi network.

Fast blinking
blue

The camera is
connecting to Arlo
servers.

Solid purple

The camera is
connected to a WiFi
network however it
is not connected to
the Internet.

Blinking purple

The camera is too
far away from the
router.

Blinking blue/
amber

A firmware update
is in progress. DO
NOT TURN OFF THE
CAMERA.

O

The camera is
powered o.

13

Notes Notes

14

15

©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and
Arlo are trademarks of NETGEAR, Inc.

Compliance

For the current EU Declaration of Conformity, visit

http://kb.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

350 East Plumeria Drive
San Jose, CA 95134, USA

September 2015

16

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.

This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.

Industry Canada statement:

This device complies with RSS-247 of the Industry Canada Rules. Operation is

This device complies with ISED's licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and

subject to the following two conditions: (1) This device may not cause

(2) this device must accept any interference received, including interference that

harmful interference, and (2) this device must accept any interference

may cause undesired operation.

received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio

Ce dispositif est conforme à la norme CNR-247d'Industrie Canada applicable

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

aux appareils radio exempts de licence. Son fonctionnement est sujet aux

(1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif

deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage

doit accepter tout brouillage reçu, y compris un brouillage susceptible de

préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y

provoquer un fonctionnement indésirable.

compris un brouillage susceptible de provoquer un fonctionnement

Caution :

indésirable.

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to

Caution :

reduce the potential for harmful interference to co-channel mobile satellite

(i) the device for operation in the band 5150-5250 MHz is only for indoor use

systems;

to reduce the potential for harmful interference to co-channel mobile

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350

satellite systems;

MHz and 5470-5725 MHz shall be such that the equipment still complies with the

(ii) high-power radars are allocated as primary users (i.e. priority users) of

e.i.r.p. limit;
(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz

the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could

shall be such that the equipment still complies with the e.i.r.p. limits specified for

cause interference and/or damage to LE-LAN devices.

point-to-point and non-point-to-point operation as appropriate; and

Avertissement:

(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p.

les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés

elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.

uniquement pour une utilisation à l’intérieur afin de réduire les risques de

(v) Users should also be advised that high-power radars are allocated as primary

brouillage préjudiciable aux systèmes de satellites mobiles utilisant les

users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and

mêmes canaux;

that these radars could cause interference and/or damage to LE-LAN devices.

(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de

Avertissement:

radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,

Le guide d'utilisation des dispositifs pour réseaux locaux doit inclure des

qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et

instructions précises sur les restrictions susmentionnées, notamment :

que ces radars pourraient causer du brouillage et/ou des dommages aux

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés

dispositifs LAN-EL.

uniquement pour une utilisation à l'intérieur afin de réduire les risques de

Radiation Exposure Statement:

brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes

This equipment complies with IC radiation exposure limits set forth for an

canaux;
(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de

uncontrolled environment. This equipment should be installed and operated

5250 à 5 350 MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.

with minimum distance 20cm between the radiator & your body.

r.e;
(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5

Déclaration d'exposition aux radiations:

725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour

Cet équipement est conforme aux limites d'exposition aux rayonnements IC

l'exploitation point à point et l'exploitation non point à point, selon le cas;

établies pour un environnement non contrôlé. Cet équipement doit être

(iv) les pires angles d'inclinaison nécessaires pour rester conforme à l'exigence de

installé et utilisé avec un minimum de 20 cm de distance entre la source de

la p.i.r.e. applicable au masque d'élévation, et énoncée à la section 6.2.2 3),

rayonnement et votre corps.

doivent être clairement indiqués.
(v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de
radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont
la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

RadiationExposureStatement:

ThisequipmentcomplieswithISEDradiationexposurelimitssetforthfor
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.


Déclarationd'expositionauxradiations:

Cetéquipementestconformeauxlimitesd'expositionauxrayonnements
ISEDétabliespourun
être installé et utilisé avec un minimum de 20 cm de distance entre la
sourcederayonnementetvotrecorps.



environnementnon contrôlé.Cetéquipementdoit

Europe – EU Declaration of Conformity

EN60950-1:2006+A11:2009+A11:2009+A1:2010+A12:2011+A2:2013

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:

- EN60950-1/A12:2011+A2:2013

Safety of Information Technology Equipment

- EN 62311:2008

Assessment of electronic and electrical equipment related to human exposure restrictions
for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified))

- EN 300 328 V1.9.1:2015

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission
systems; Data transmission equipment operating in the 2.4GHz ISM band andusing wide
band modulation techniques; Harmonized EN covering the essential requirements of article

3.2 of the R&TTE Directive

- EN 301 893 V1.8.1:2015

Broadband Radio Access Networks (BRAN); 5GHz high performance RLAN; Harmonized EN
covering the essential requirements of article 3.2 of the R&TTE Directive

-

- EN 301 489-1 V1.9.2:2011

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical
requirements

-

- EN 301 489-17 V2.2.1:2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for
Broadband Data Transmission Systems

Česky

[Czech]

Dansk

[Danish]

Deutsch

[German]

Eesti

[Estonian]

[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími

příslušnými ustanoveními směrnice 1999/5/ES.

Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse]

overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den

grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG

befindet.

Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment]

vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele

sätetele.

English

Español

[Spanish]

Ελληνική

[Greek]

Français

[French]

Italiano

[Italian]

Latviski

[Latvian]

Lietuvių

[Lithuanian]

Nederlands

Hereby, [NETGEAR, Inc.], declares that this [Arlo Q] is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC.

Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos

esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ

ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences

essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti

essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips]

atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas

1999/5/EB Direktyvos nuostatas.

Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de

[Dutch]

Malti

[Maltese]

Magyar

[Hungarian]

Polski

[Polish]

Português

[Portuguese]

Slovensko

[Slovenian]

Slovensky

[Slovak]

Suomi

[Finnish]

essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet

essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és

az 1999/5/EC irányelv egyéb elõírásainak.

Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz

pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e

outras disposições da Directiva 1999/5/CE.

[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi

določili direktive 1999/5/ES.

[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné

ustanovenia Smernice 1999/5/ES.

[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen

laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen

Svenska

[Swedish]





mukainen.

Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga

egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.