Quick Start
AC1200 WiFi VDSL2/ADSL2+ Modem Router
Model D6220
Package Contents
Modem router
Connect the power adapter to the modem router and press the Power button.
The Power LED
is ready. If the modem router is connected to a DSL service, the DSL LED
lights green.
Position the antennas as shown. Later you can adjust them as needed for better
reception.
lights amber and then turns green when the modem router
2. Connect to the Internet
DSL microfilter
(varies by region)
Ethernet cable
1. Plug In Your Modem Router
Connect the DSL port on the modem router to a DSL outlet.
If your package came with a DSL microfilter, install the DSL microfilter and
connect it to the DSL port on the modem router. You can also connect a phone
to the DSL microfilter.
Phone cable
Power adapter
(varies by region)
You can either use an Ethernet cable or connect with WiFi to the modem router.
To connect with WiFi:
Make sure that the WiFi LED
modem router’s preassigned WiFi network name and password on the label
on the modem router.
Open the WiFi connection manager on your computer or WiFi device,
find the modem router’s WiFi network name, and use the modem router’s
password to connect.
Launch a web browser. If the NETGEAR installation assistant does not display,
visit www.routerlogin.net. If a login window displays, enter admin for the
user name and password for the password.
Follow the NETGEAR installation assistant steps to connect to the Internet.
If the modem router does not connect to the Internet, see the user manual,
which is available online at http://support.netgear.com/product/D6220, or
visit community.netgear.com for help.
on the modem router is lit. Find the
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
All Set Up!
DSL outlet
DSL microfilter
Get Free Apps
Start enjoying your new modem router right away with free apps that make
management simple. Visit http://support.netgear.com/product/D6220 to
download the apps.
NETGEAR genie. Personal dashboard to monitor, control, and repair your
home network. Includes remote access to manage your network away
from home.
ReadySHARE Vault. Free soware for automatic backup of a Windows
Modem router
Power
adapter
computer to a USB hard drive that is connected to the modem router.
Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you use
only ocial NETGEAR support resources.
Phone cablePhone
Computer with WiFi connection
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Note: To connect to the modem router, you can use either a computer with an Ethernet
cable connection or a computer with a WiFi connection.
Note: If you set up the modem router for a DSL connection, you do not need to use the
red Internet port on the modem router.
For more information about your modem router, see the Do More booklet.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
March 2016
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC R u les. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to
indoor environment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
FCC REQUIREMENTS
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom is a label that contains, among other
information, a product identifier in the format US: 5NHDL01B00328. If
requested, this number must be provided to the telephone company.
Applicable connector jack Universal Service Order Codes (“USOC”) for the
Equipment is RJ11C.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation
instructions for details.
The REN is used to determine the number of devices that may be connected
to a telephone line. Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In most but not all areas,
the sum of RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the total RENs,
contact the local telephone company. For products approved after July 23,
2001, the REN for this product is part of the product identifier that has the
format US: 5NHDL01B00328 The digits represented by 01 are the REN without
a decimal point .
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service
may be required. But if advance notice isn't practical, the telephone
company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the oper ation of the equipment.
If this happens the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted
service.
If trouble is experienced with this equipment, for repair or warranty
information, please contact as below.
COMPANY: Netgear Inc.
ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 U.S.A
TEL NO.: +44(0)1344 458217
If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is
resolved.
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or corporation
commission for information.
If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this equipment does not disable
your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher th e reason fo r the
call.
2) Perform such activities in the off-peak hours, such as early morning or late
evenings.
Loading...